Fantastic Biobio TP45 HP : WR E8200/E8300/Q9450/X3360 ...

[Gautam]

Just for you , your desire becomes Reality my dear gautam



http://valid.x86-secret.com/show_oc.php?id=391793


Vcore : 1.85v
VNB : +0.7v
Vfsb : +0.35v
Vddr : + 0.9v

Temp Evapo : -109°
Temp Liquid Chiller : -25° (in the reservoir) for the NB !!

More Pics soon

Chip did arrive, it is looking quite good.

[NormanABates]

@boblemagnifique,
hats off to you, fantastic result.

[Eppikk]

Damn Bob! I have a Q9450 and can only reach 479 FSB on AIR!! (P5E3 Prem)

Awsome results, was that Q9450 on Cascade?

[TheKarmakazi]

Very Nice!!!

My biostar tpower I45 is on the way, I hope to join you soon

[CtrlAltDel]

I also have TP45 with Q9450 on it. Since im a noob overclocker, I need suggestion from others.
My sys :

TP45 + Q9450
2x1 Gb Kit Adata Vitesta 1066++
500Gb WD
HIS X1650 IceQ
Point Of View Black Diamond 550W
Asus Triton 79 Air Cooling

Can only hit 441 FSB with 1:1 DRAM config. Should I change to some water cooling to get higher FSB? What do think guys?
Should I change to better graphic card?
Some pics..


BIOS setting :
All AUTO except :
Ratio CMOS setting : x8
Intel Speedstep Technology : Disabled
CPU Freq Setting : 445

Need help and advise....

[boblemagnifique]

107% on the E8300, what can anyone say other the superb.
My E8200 is killer good for air/water, I can send it you to try on the cascade, just don't burn it though

Can you try same settings with 6 Multi for max fsb? You have Pm

Thank , yes the E83 is impressive !!

Yes same setting with 6 multi

Great bunch of WR's. Congrats.
Did u tested that E8200 on air?

i have test the E82 under commando , but not with the TP45 HP yet

Chip did arrive, it is looking quite good.

great !!

@boblemagnifique,
hats off to you, fantastic result.

Many Thank , good combo (cpus/mobo/memory)

Damn Bob! I have a Q9450 and can only reach 479 FSB on AIR!! (P5E3 Prem)

Awsome results, was that Q9450 on Cascade?

Yes i don't test the fsb on air but the Q9450 is stable at 3.7ghz at 1.31v on air (C0 is good but rare) , i have sold since 2 week.

Very Nice!!!

My biostar tpower I45 is on the way, I hope to join you soon

Yes of Course , i wait your result !!

I also have TP45 with Q9450 on it. Since im a noob overclocker, I need suggestion from others.
My sys :

TP45 + Q9450
2x1 Gb Kit Adata Vitesta 1066++
500Gb WD
HIS X1650 IceQ
Point Of View Black Diamond 550W
Asus Triton 79 Air Cooling

Can only hit 441 FSB with 1:1 DRAM config. Should I change to some water cooling to get higher FSB? What do think guys?
Should I change to better graphic card?
Some pics..


BIOS setting :
All AUTO except :
Ratio CMOS setting : x8
Intel Speedstep Technology : Disabled
CPU Freq Setting : 445

Need help and advise....

Please a check my setting in the first post

With the Xeon X3360 , i can screen at 500mhz of fsb on air and 520mhz on caskade mais i don't boot up at 445mhz , i need up the fsb with Setfsb under windows

[Nosfer@tu]

Amazing work yet again m8

[CtrlAltDel]

OK I'll try it. Anyway, I see on your cpuz, the procie stepping model and revision different from mine.
On your cpuz, it appears "ES", stepping 6, and revision C0. Mine was stepping 7, revision C1 without "ES".
Can you explain me what is the different between your procie and mine?
You mean using SETFSB and change the FSB via Windows?
Pardon me for my bad english

[TheKarmakazi]

OK I'll try it. Anyway, I see on your cpuz, the procie stepping model and revision different from mine.
On your cpuz, it appears "ES", stepping 6, and revision C0. Mine was stepping 7, revision C1 without "ES".
Can you explain me what is the different between your procie and mine?
You mean using SETFSB and change the FSB via Windows?
Pardon me for my bad english

ES means Engineering Sample, the cpu's intel gives out to reviewers and benchers before a chip is offcially released.

C1 Stepping is newer than C0, im not sure if C1's clock better or not though. Thats a question for someone else.

[chispy]

Congrats , great results , what is the max for v.core in Bios ? or its the board v. moded ?

[boblemagnifique]

Amazing work yet again m8

Thank

Congrats , great results , what is the max for v.core in Bios ? or its the board v. moded ?

+ 0.7875v of Vid (but with the QX , you choose the VID 1.1v at 1.6v)
The board isn't vmod for the moment , full stock !!!

[boblemagnifique]

Today i test my Q9550 C1 (ES) under Caskade !!! , New WR for the Q9550's , i see 552mhz but the valid is corromput !!! -> On Air : 521mhz easy



http://valid.x86-secret.com/show_oc.php?id=394981

[Oliver]

Congrats Boble...

[marcolecorse]

nice bob

[NormanABates]

again, amazing result man.

geez, Biobio is really showing some fsb there.

[SoF]

some nice screenies from you again bob that E8300 rockz - looks like biostar is fun for everybody at the moment

[Sadhiq]

Are you going to take all the WR's ?

[Tatty_One]

I have a very nice E8200 which I can get to near 4.5gig on air, it benches stable on 4.4-4.45gig and only needs 1.515V to get there, wonder what that baby could do on cascade!

[George_o/c]

I have a very nice E8200 which I can get to near 4.5gig on air, it benches stable on 4.4-4.45gig and only needs 1.515V to get there, wonder what that baby could do on cascade!

Kingpin also had a nice E8200 ... 1.6Vcore @ 4600MHz 3D 01 benchable ...

Congratulations boble !
You know what I'm waiting from you now uh ? ... hehe, *cough cough* Q9650WR *cough cough*

Keep pushing it man !

[misteroadster]

What else ?

[killapig]

French state of the art

[day187]

nice

Now can you please test max FSB