I have no problem with these, other than dead DVI out...
I have no problem with these, other than dead DVI out...
www.teampclab.pl
MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12
Test bench: empty
Dead DVI out???? physical, or driver issue???Originally Posted by xoqolatl
IM getting an INF error during install, anyone else?????
Last edited by GAR; 07-03-2008 at 12:35 PM.
So far been great drivers under vista x64. Return of the scaling slider.
Also enabled dual monitor (extended desktop) while running crossfire using 2900xt's
Last edited by MGreg; 07-04-2008 at 09:53 AM.
Need Help With Your Mushkin Memory? Send Me a Email greg@ ...
System - Q9650@4.41Ghz 1.43v, Swiftech GTZ water block, Mushkin XP3-12800 2x2GB @ 1633 7-7-7-20 1.8v, 7200.10 6X250GB Raid 0, eSata 250GB 7200.10, Asus Rampage Extreme ,Mushkin XP-800AP , Palit 4870x2 @800/4000 (256/320 2D) ,(2)PA 120.3, 6 Ultra Kaze 2000RPM, (2)MCP 655, EK Multi-Res, Mountain Mods Duality Case, Onkyo TX-SR576 AMP, Sennheiser HD555,
Driver issue. 3870s and 3850s work fine; with generic Microsoft driver it works fine; when ATI driver is loaded image disappears. Monitor is detected in CCC and I can extend a desktop onto it... only it shows black. Several people have the same issue with different monitors. One of them was told by an ATI technician that it's a driver issue with EDID on some monitors, and that fixed drivers are on the way.
www.teampclab.pl
MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12
Test bench: empty
Hey when does the lowered idle clocks fix come? I'd like to see my 4850 idling around 50-100mhz, not 500mhz
I swore there was one that let you run 160 mhz core and 500 mhz or so memory.
there's an MSI bios that allows you to do that, but I'm hoping a simple Catalyst update can fix everything, if not I'll just download the msi bios, mod it with RBE to get me above 700mhz 3d and then later on get some better cooling and push for 900mhz with some hard modding
I tried to install these drivers on a Vista 32-bit system I just built... Do not work.
Intel Core i7 920 @ 3.8GHz (183x21)
Gigabyte EX58-DS4 BIOS F5
3GB PATRIOT PC3-10666 DDR3
Sapphire Radeon HD4870 512MB BLACK
2x500GB SEAGATE SATA-II 7200.11
OCZ GameXstream 750W PSU
Antec Three Hundred Chassis
Any one got an idea when the real 8.7 comes out? This is my first ati card so I don't know how long they take to update drivers
There's a new Catalyst release every month, hence the release version (8.7 for july, 8.8 for august and so on).
A while back ATI tended to release them on the 2nd week of the month but now they're coming very late.
Murray Walker: "And there are flames coming from the back of Prost's McLaren as he enters the Swimming Pool."
James Hunt: "Well, that should put them out then."
Next week, I hope. Last Catalysts were released on 18th.
www.teampclab.pl
MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12
Test bench: empty
Me too. My 9800gtx died last week and my old faithful 1900xt will be in its place until 4870X2 is released. Playing Mass Effect w/o Depth of Field really sucks...
Murray Walker: "And there are flames coming from the back of Prost's McLaren as he enters the Swimming Pool."
James Hunt: "Well, that should put them out then."
im having some odd DX issues with Medieval II but otherwise they seem alright, i think these drivers are really holding the 4870/50's behind though. Im sure in a week when 8.7 final is out they will make most things right and the next few releases over the coming months
I also have some weird system hang today since installing radeon. Although it's been a full year since i installed vista LOL!with multiple beta SP1's and tons of hotfixes, overall performance is good..but a clean install is calling, maybe this weekend after i back ups
~
Posting Permissions
Reply With Quote
Bookmarks