Gigabyte X48T-DQ6 CPU and memory testing

[guess2098]

what Vdimm?

all 1.9v DDR3 2000 CL8, DDR3 1800 CL7 and DDR3 1600 CL6

[Ace-a-Rue]

DARN GOOD!...i have GSkill 2 x 2gb DDR3-1600...i had to use 2.0v to get above 1600 speed.

[Supershanks]

great clock vanovich

.i have GSkill 2 x 2gb DDR3-1600...i had to use 2.0v to get above 1600 speed.

Yep started to play with my cellshock 1800 again on the x48T & needed to go >2v to get 6,6,6,18 to post Still early days.

[vanovich]

great clock vanovich


Yep started to play with my cellshock 1800 again on the x48T & needed to go >2v to get 6,6,6,18 to post Still early days.

thanks ,just got a retail 8500 .and testing

[vanovich]

anyone have a clkgen for this board? tired off using pro5 software

[BenchZowner]

anyone have a clkgen for this board? tired off using pro5 software

SetFSB is a handy utility that allows you to manipulate ( i.e. adjust ) your motherboards FSB frequency in realtime inside Windows.
It supports a numerous amount of PLLs, enough to cover a big number of motherboards out there, including this one ( Gigabyte GA-X48T-DQ6 ).
You just need to open it up, select the ICS9LPRS914EKL PLL from the "Clock Generator" drop-down menu, then tick the checkbox next to "Ultra" and press the "Get FSB" button.
Then you can start using it to adjust your FSB & PCI-Express BUS frequencies with the sliders or the Up/Down arrows ( and of course pressing the "Set FSB" button after adjusting the frequencies )

Download SetFSB here

[vanovich]

Download SetFSB here

thanks ,link to it please .

[vanovich]

thanks 530 fsb so far

[Valdo]

Hi guys i need help on this mobo.
All details here: http://www.xtremesystems.org/forums/...5&postcount=55
Thx in advice

[vanovich]

just managed to get 545 fsb http://valid.x86-secret.com/show_oc.php?id=343015

also benching 3dmarks at 4906mhz , nearly 32000 in o5 and 2x2900xt

[Supershanks]

Nice going vanovich
Max FSB on miy E8200 at the minute is 7.5x520
Benches
Haven't gone much further yet, been playing with memory

luck

[vanovich]

Nice going vanovich
Max FSB on miy E8200 at the minute is 7.5x520
Benches
Haven't gone much further yet, been playing with memory

luck

thanks hanks ,yes there is a lot off findings to the ram on this board ,im benching 5.0 3dmark .and looking good .

[Supershanks]

yes there is a lot off findings to the ram on this board ,im benching 5.0 3dmark .and looking good .

Hell yes Ive been looking at possible 24/7 timings so am running with my vdimm at 1.85v just below the max of 1.90v, will try the big shots later when i understand it a bit more

So far have explored :-
E8200 3,900 7.5x520Mhz @2.40B = 1,248Mhz 5,5,5,12
500x7.5 @3.33 1650Mhz 6-6-6-12
3,825 511x7.5 @3.33D = 1700Mhz 7,7,7,12
Have been meaning to put my Q6600 Go back in & get a decent clock going on that, but to be honest , have been having too much fun

Am on F5A BTA at the minute no real issues

luck