45nm / DDR3 era Spi discuz.

[dinos22]

hey before i thought my Gigabyte was weird as i started to notice some strange behaviour like that heh



absolute best FSB i can get out of SS cooling and 9xmulti with E8500 and SS

need that half a multi

45K efficiency too on DDR2

[massman]

Heavy stuff, Dino. Do you still have headroom? You're still not sub45k (3Mhz less or 0,06s less)

[massman]

Damn, my previous drawing was pretty crappy, here's what I really meant by two lines:

[dinos22]

Heavy stuff, Dino. Do you still have headroom? You're still not sub45k (3Mhz less or 0,06s less)

of course
i want to break 45K past 5.5GHz

if i could only find a motherboard that can handle these RAM sticks it would be soooooooooooooooooooooooooooooooooo much fun



this particular gigabyte is shaving off 10-15MHz FSB on another board
and slot 3 and 4 clock a LOT worse so no dual channel serious DDR3 benching until i find something else
my asus P5E3 DLX is dead

[massman]

to break 45k, you don't need DDR3

[dinos22]

to break 45k, you don't need DDR3

i would like to smash it
DDR2 is possible to
there are no tweaks there at all LOL in my runs

[massman]

Seriously? Raw system power at 45k PP?

[dinos22]

Seriously? Raw system power at 45k PP?

yeah man

but 32M times suck lol so gotta work that out heh

[massman]

Should do more research, but I reckon it's all about the 570FSB, no?

[dinos22]

Should do more research, but I reckon it's all about the 570FSB, no?

nah
i can do that at lower FSB too

it's this board and bios

[massman]

Same advantage as the 0401 bios of the Maximus Formula SE? Do you have a higher PP when using another bios of the same board? If so, what's the difference with the other biosses?

So many questions

[dinos22]

GB has crap bioses aside from first releases IMO for extreme overclocking
for normal use and stuff they should be similar donno

[massman]

So F2 outperforms F5 (with updated 45nm support)?

LOL, it seems like bios updates slow down the 45nm cpu's

[dinos22]

So F2 outperforms F5 (with updated 45nm support)?

LOL, it seems like bios updates slow down the 45nm cpu's

problem is that you can't clock FSB on anything other than F2

so if you plan to be stuck around 450MHz FSB on a dual core that can do another 100+ good luck ROFL

clock for clock it was a touch slower too
1M uses CPU cache should it should be some kind of indicator i guess and first bios is just fine

i asked gigabyte for half multies to be added to F2 DDR3 bios and F3 DDR2 bios

if that happens all is good and i will not change bioses after i get the half multies heh

[dinos22]

to break 45k, you don't need DDR3

true that



not optimised yet

[massman]

Still no tweaks?

[dinos22]

still no tweaks

ran it again

[massman]

As far as I know, you now are the most efficient bencher behind OPB and Coolaler ...

[Zeus]

As far as I know, you now are the most efficient bencher behind OPB and Coolaler ...

He's just another cheater.

[massman]

Haha, Zeus

Just wondering at what PP he would be with tweaks and even better rams

[dinos22]

well i have been hanging out at OCX


anyways here is the problem

no tweaks here either 'cept for LSC of course




it could be the case that my OS is just really dirty

did i mention i keep reusing the same install on all Intel chipset motherboards cause i'm lazy to install an OS from scratch

[dinos22]

Haha, Zeus

Just wondering at what PP he would be with tweaks and even better rams

my 1M tweaks are not that great
probably just low maxmem value

i reckon it would probably go down to 44.85K at most

[massman]

Low maxmem? Why is the real memory a number with 10 digits then?

[dinos22]

Low maxmem? Why is the real memory a number with 10 digits then?

i haven't applied any tweaks yet
i am saying when i bench 1M i just lower the maxmem value and start benching

[kiwi]

hey Dinos, you don't have a separate HDD for benching? Why no perf. level 6/7 @ 513?