I lost Car Low and Car high with SINGLE XFX 8800Ultra....

[MaK2000]

Really? I am a huge MX1 and now MX2 fan but have no experience with DICE and LN2. What other options are there for those temps? Liquidpro?

[T_M]

Sorry i dont know.
Ceramique i know works, and is available, and good, so i use it

[MaK2000]

Well that is enough to know right there I suppose. I guess next round I will have to get some MX2 and Ceramique. What types of temps have you guys got on Ceramique? I haven't heard anything from the notables like Hipro and Kingpin.

[hipro5]

Well that is enough to know right there I suppose. I guess next round I will have to get some MX2 and Ceramique. What types of temps have you guys got on Ceramique? I haven't heard anything from the notables like Hipro and Kingpin.

ONLY Arctic Ceramique in this worlds is supposed to work under subzero temps and don't lose it's carasteristics at ~ -195*C (if I remember well)......
ALL others, loses their carasteristics under subzero.....

Ahhh........I found some old tests of mine at only -22*C....IF you go lower, you're screwed with the others

[MaK2000]

Thank you very much Hipro. Those results help a lot. This is the stuff right?

http://www.newegg.com/Product/Produc...82E16835100009

Your charts show basically Arctic Silver products other than Shin Etsu. Has anyone tried MX products? I figure so but have to ask.

[hipro5]

Thank you very much Hipro. Those results help a lot. This is the stuff right?

http://www.newegg.com/Product/Produc...82E16835100009

Your charts show basically Arctic Silver products other than Shin Etsu. Has anyone tried MX products? I figure so but have to ask.

Yes that's the one..... It also comes out at 12grams too (a bigger one)....

You have to test it by yourself.....OR look at companie's data for it's carasteristics IF they have tested under subzero.....

[MaK2000]

Thank you again. Guess my night is done. You cleared all of my questions.

[MaK2000]

I thought of one more thing on my way to bed. Are you using Ceramique for CPU, GPU, and VGA mem? Also, wanted to say that Youngpro and T_M have some experience on their own. Didn't mean any offense. I had never heard of them until I did some searching.

[T_M]

No offense taken. I just looked at your post count :P
Hehe joking.

I never put TIM on my memory, why would you want/need to?

[G H Z]

I found some old tests of mine

That should be referenced somewhere

[dinos22]

These new chips clobber the conroe in lobbies/cars. 5400mhz conroe on 975x/forceware drviers was something like 520fps LH. 2001 eats up cache..

talk about eating up cache

check out this run single 8800GT 700/999 and yorkfield at 4.8Ghz

LH 541FPS