[First look] Biostar TF560 A2+ (can do at least 355MHz HTT)

[mad_skills]

You need something WAY better than stock cooling

i agree..

[BeardyMan]

You need something WAY better than stock cooling

I know i have a custom made WC block on it's way, i should have it by monday or tuesday...It's bigger then a dryice container

[mad_skills]

it's a different story on water..

[BeardyMan]

it's a different story on water..

yes it is, for sure when 240W tec is applied

[informal]

I know i have a custom made WC block on it's way, i should have it by monday or tuesday...It's bigger then a dryice container

Now you're talking dirty .Bring it on !

[BeardyMan]

Guys what can i use for overclocking in windows?

[mad_skills]

ClockGen

[BeardyMan]

ClockGen

actually no
i'm aware of current software but neither clockgen or setfsb works :/

[mad_skills]

well, you missed to mention that neither of these two work
anyway, clock gen, setfsb, and memset are only utilities i know that can be used in windows..if non of these work you're bios binded..

[BeardyMan]

well, you missed to mention that neither of these two work
anyway, clock gen, setfsb, and memset are only utilities i know that can be used in windows..if non of these work you're bios binded..

then i'm screwed with this mobo in order fro wr attempt

[mad_skills]

use it for 24/7 settings or 3D Mark, and apply the wr idea to another mobo..

[BeardyMan]

use it for 24/7 settings or 3D Mark, and apply the wr idea to another mobo..

nah it's fine, this board wil have to cutt it

[LIKMARK]

That's the downside of using the latest hw there is, you should try a DFI 590 or Crosshair for your wr attempt. And you have to be ready to kill your ram to make it. With 1000mhz, cas 3 (3,5v or something), and cpu at 3700\3800mhz you should be able to do it

[M4D_H4773R]

3,5v :O

[BeardyMan]

3,5v :O

i was thinking the same, why not give it 500V and see if it can run cas 0.2

[mad_skills]

That's the downside of using the latest hw there is, you should try a DFI 590 or Crosshair for your wr attempt. And you have to be ready to kill your ram to make it. With 1000mhz, cas 3 (3,5v or something), and cpu at 3700\3800mhz you should be able to do it

not optimistic at all

[BeardyMan]

Omg i can't seem to pass 235mhz regardless of stock cooler or watercooling.
3507mhz is stable in every single bench yet 1single mhz more in bios and it won't load windows :/
OMG i need a clockgen or a tool that clcok in windows

[Hemi]

with my board not posting, about 2 weeks now since i flashed to the quad core bios. It was time to try again. This time with good luck. Using the on board flash in the bios> Load your floppy with bios. Hit enter and will show the bios version on your floppy. Then TAB, will hightlight update dmi change to yes (page down or up to change. Press TAB again to highlight bios, then load bios.I have changed back and forth a couple of times from quad to dual core and no problems. Maybe we can get rebels haven to mod quad core bios for us. A few more instructions in the bios would help. Hope this helps you guys that have this board

[S1nn3r]

Doing a bit of forum grave digging on this thread to ask if anyone knows if this board will for sure support the 5000+ BE and 2GB DIMMs (as in a 2x2GB Kit) out of the box ? as I need a inexpensive stop gap AM2 board till the dust settles on the 790FX/Phenom situation, and this looks like the best around at the moment for a single video card setup ..

[bernardmem]

Same here. All the 790fx and Quad mess has given me a headache! I have a am2 5600+ and a set of Firestiks that need a home. Haven't been able to get a motherboard yet. So many other things that needed paid first. I would get a 5000 or 6400 BE of this board will support it and jyst wait until all stuff get fixed.

[Hemi]

New Bios out today C21