MB AM2+, 790FX, DFI-LP UT 790FX-M2R, DDR2-800, 2*PCIex16 (3way CrossFire), 2*GbLAN, SATA II, RAID5, 1394, 8CH Bernstein.
Picture:
There will also be a DFI-LP UT 790FX-M2RV, which will include a VoIP card.
Both models can already be preordered at certain websites for about 200 euro, but there's still no info available on delivery dates.
Update: Board will be widely available 2 to 3 weeks after official launch.
Source:
http://www.nowpug.com/bbs/view.php?i...esc=asc&no=366
Last edited by Jack; 10-23-2007 at 08:09 AM.
the board layout/ colors remind me of DFI p35 lanparty and the old nf4 lanparty series combination
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
lol surely those headers are not all for fans
i5-750 w/ Thermalright Ultra120X
Coolermaster HAF-932
MSI GD65
2x2GB G.skill Cas7 1600MHz
Sapphire HD6870
Western Digital 640GB.AAKS
2x Samsung F1 1TB
2x Samsung SLC 64GB SSD
Pioneer DVR-212BK
Corsair HX620W
Creative X-Fi Xtreme Music (dead, using onboard -.-)
LG W2286L
It's probably the angle but how the hell are you going to screw the middle hole near that heatpipe....??
Lian Li V2000+ Modded
Intel Core I7 920 @ 3.8Ghz 1.325v Thermaltright Ultra 120 Extreme RT1366
Asus Rampage Extreme 2
OCZ 3x2GB DDR3 1600 Platinum
EVGA GTX460 768MB 850/1700/2100Mhz SLi
EVGA 8800GT SSC 730/1800/2000Mhz
Corsair HX850W
Its probably covered- its been an issue before. Abit Wendy SLI (NF4) springs to mind.Originally Posted by NightCrawler™
It's probably the angle but how the hell are you going to screw the middle hole near that heatpipe....??
lookin forward to the next DFI AMD board
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
Cool layout. How many ppl need 4 PCI-E x16 anyway. I think this is the 790 board ill pick up if i decide to buy one.
Seems we made our greatest error when we named it at the start
for though we called it "Human Nature" - it was cancer of the heart
CPU: AMD X3 720BE@ 3,4Ghz
Cooler: Xigmatek S1283(Terrible mounting system for AM2/3)
Motherboard: Gigabyte 790FXT-UD5P(F4) RAM: 2x 2GB OCZ DDR3 1600Mhz Gold 8-8-8-24
GPU:HD5850 1GB
PSU: Seasonic M12D 750W Case: Coolermaster HAF932(aka Dusty)
Last edited by Brother Esau; 10-23-2007 at 09:17 AM.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
where is the LP X38?!? please be quick DFI
I counted 8 Fan headers. But I'm not really sure if the two by the PCI-Express 16X slot is one.
The 2 by the PCI-E slots look more like 4-pin floppy headers, like the ones on DFI NF4 boards.
Hoping to see this board in the $150 range, and of course Phenom(or whatever its called now) to turn out good
Lian-Li V1000B || i5 2500k || Gigabyte P67-UD4 || 4GB Dominator 1600s || eVGA GTX 570 || 60GB OCZ Vertex || Corsair HX850
Plug by PCi-E slot are floppy power connectors to supply additional power to each slot. I hate seeing those, as it means this board won't work with Enermax Galaxy.
wet dream material.
this'll match with my DFi lanparty ultra-d (939)
haha yeah i knowwet dream material.
this'll match with my DFi lanparty ultra-d (939)
Last edited by perkam; 10-23-2007 at 01:41 PM.
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
I want one NOW !!!
200eur? Wow, compared to previous high end motherboards this is dirt cheap!
when official launch?
Because both pictures are from a completely vertical angle i can not tell the height of the SB heatsink but if it has any height at all it looks like it would completely obstruct install any high end graphics card in the second PCIe x16 slot.
If that is the case then
Edit: Also when comparing this to the 790-DQ6 how is it that the NB heatsink for the DFI like a toy action figure compared to the one the DQ6.
Same for the SB, the DQ6 has a very small heatsink while M2R has a much bigger one?
Whats the deal?
Last edited by IcY18; 10-23-2007 at 11:06 AM.
The 2 by the PCI-E slots look more like 4-pin floppy headers, like the ones on DFI NF4 boards.
Hoping to see this board in the $150 range, and of course Phenom(or whatever its called now) to turn out good
Thats wishful thinking my friend as this will almost certainly be a $300.00 board.
But thank GOD and I cant wait to get away from this Intel Crap!
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
yes! this is how good boards should look like!
Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
32 GB Patriot Viper Steel 3733 CL14 (1.51v)
RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
Tons of NVMe & SATA SSDs
LG 27GL850 + Asus MG279Q
Meshify C white
Because the NB on Amd boards don't need that much cooling because the memory controller is on the CPU die? Which usually is the source of most of the heat. I'm sure DFI engineers aren't stupid enough like MSI to make their South Bridge Heatsink so tall you can't fit long cards.Because both pictures are from a completely vertical angle i can not tell the height of the SB heatsink but if it has any height at all it looks like it would completely obstruct install any high end graphics card in the second PCIe x16 slot.
If that is the case then
Edit: Also when comparing this to the 790-DQ6 how is it that the NB heatsink for the DFI like a toy action figure compared to the one the DQ6.
Same for the SB, the DQ6 has a very small heatsink while M2R has a much bigger one?
Whats the deal?
no worries, the southbridge cooler isnt too high. i think that puts it above almost wank material.. but the floppy power connectors next to the cards push it back down to almost only.
I'm waiting for this board or something better... depends on perf.
D.F.I all the way baby
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Nah high end amd boards usually go for $200 and slightly above. 300 is Intel pricing
Seems we made our greatest error when we named it at the start
for though we called it "Human Nature" - it was cancer of the heart
CPU: AMD X3 720BE@ 3,4Ghz
Cooler: Xigmatek S1283(Terrible mounting system for AM2/3)
Motherboard: Gigabyte 790FXT-UD5P(F4) RAM: 2x 2GB OCZ DDR3 1600Mhz Gold 8-8-8-24
GPU:HD5850 1GB
PSU: Seasonic M12D 750W Case: Coolermaster HAF932(aka Dusty
Yep... for more stable pci-e power with CF running. but DFI has been ample in general with fan headers.. I love the layout of this board.. very nice.
Gigabyte x58 UD5 / core i7 920 @ 3.8 / 6G ddr3 / 100G Patriot Inferno + 500G WD / gtx470 SLI watercooled / x-fi / 1KW enermax / 5760x1080 surround
Gigabyte z68x-ud3-b3 / core i5 2400 @ 3.6 / 8G ddr3 / 120G Intel 510 + 120G Adata S599 + 2x 1T WD blue / Zotac gt430 / x-fi / 500w ocz / 1920x1200
DFI pro875B / pressy 2.8 / 2g corsair xms pro / 6800gt agp / 150g raptor x / 500w ultra x-connect / lots of UV lighting / smiles
MSI K7N2 Delta-L / Athlon xp2600+ / 1G ocz platinum / chaintech TNT2 / 2x Diamond Monster 3D II SLI / Audigy / more smiles
Posting Permissions
Reply With Quote
Bookmarks