Quad Core OC Database

[turtletrax]

Any more thoughts on a 4Ghz Quad club?

[dzeuk_ph]

So anyone tried max. fsb?

[aspms*]

So anyone tried max. fsb?

There is already another thread for this type of statistic: http://www.xtremesystems.org/forums/...d.php?t=157946

[Luis_GT]

1) QX6700, B3
2) L639A615
3) http://valid.x86-secret.com/show_oc.php?id=243386
4)
5) Water cooled (Thermaltake block)
6) 1.48 bios, 1.39-1.4 real
7) Asus P5W DH Deluxe

Hope you don't mind me using SMP as a stability tester... don't feel like shutting it down.

[CraptacularOne]

Hey Luis nice to have you aboard, but can you please get me a shot of it running prime?

[Luis_GT]

I'll do SPI32M... If I get some time, I'll do a Prime 95 run.

[CraptacularOne]

I'll do SPI32M... If I get some time, I'll do a Prime 95 run.

Prime is preferable, and if you choose Pi 32m, I'm going to need a quad instance

[Luis_GT]

Ok, so 2-8 hours of prime is enogh right?

as soon as my HDD backup finishes, I'll start it.

[dj883u2]

My Q6600....

Q6600 G0 | L725B057 | 3608mhz | 1.352V | Liquid |





Q6600 G0 | L725B057 | 3708mhz | 1.40V | Liquid |





1) G0
2) L725B057
3) Water - D-Tek Fuzion
4) 1.352V@3.608Mhz - 1.40V@3.708Mhz
5) Asus P5K-E

By

[CraptacularOne]

Ok, so 2-8 hours of prime is enogh right?

as soon as my HDD backup finishes, I'll start it.

That will be fine

List up dated again

[largon]

Err...
I seem to have typed in an incorrect week-code for my CPU.
Please fix: "L727A786" to "L724A786".

[RLM]

My entry post #170 seems to be missing from your update.

If there's a problem with it please let me know.

RLM

[linflas]

@ craptacularone,

Need you to adjust the stable vcore on my entry, was getting errors on one type of workunit in WCG, the other 3 were fine, adjusted the vcore a bit and loosened some secondary memory timings, and all is well again.

Please adjust the 1.48 I had posted earlier to 1.52, thanks.

Also, don't know if it was mentioned before, but shouldn't the VID of each chip be listed as well?

[CraptacularOne]

List updated, errors fixed

[CraptacularOne]

list re-ordered to reflect voltages needed for clock speed attained aswell

[Luis_GT]

1) QX6700, B3
2) L639A615
3) http://valid.x86-secret.com/show_oc.php?id=243713
4)
5) Water cooled (Thermaltake block)
6) 1.52 bios, 1.408 real
7) Asus P5W DH Deluxe

here we go, as you can see, its nice and crispy... I'm glad I ordered a Apogee GT... this Thermaltake could barely keep up with my old E6600 Most likely it'll do better once I get the new block.

[timber715]

Q6600 L727A673 G0
air cooled: Tuniq tower 120
1.375V bios
asus p5k-deluxe wifi
temps 38 - 67C

[EXPANDER]

q6600 go. bios 1.19v, Low voltage with, core 3040 mhz

[CraptacularOne]

List Updated

@ Luis_GT damn dude! you can keep your house warm with those temps!

@ EXPANDER, I'm going to need more info than that to make use of your result. Give me the week, a shot of it running Prime @100% load (all 4 cores), cooling used, and motherboard.

[dj883u2]

Q6600 G0 | L725B057 | 3808mhz | 1.456V | Liquid |





1) G0
2) L725B057
3) Water - D-Tek Fuzion
4) 1.456V
5) Asus P5K-E

By

[Luis_GT]

... why would I want to warm up my house... I'm constantly turning my A/C on...

Sad thing, My water temp doesn't break 30c

[CraptacularOne]

... why would I want to warm up my house... I'm constantly turning my A/C on...

Sad thing, My water temp doesn't break 30c

It was a joke.....you know "haha funny"?....

And if your water temps are getting that high, it's almost definitely because of a poor block that's not transferring heat from the CPU.

@ dj883u2, updated your result

[Luis_GT]

It was a joke.....you know "haha funny"?....

And if your water temps are getting that high, it's almost definitely because of a poor block that's not transferring heat from the CPU.

@ dj883u2, updated your result

I know it was a joke... I was just saying that my house can't get any hotter...

Anyways... Apogee has been shipped... Soon I'll post an updated OC... one that doesn't reach 81C

[EXPANDER]

L719 GO, Q6600 1.19 Vcore 3040 mhz -60C phase change
SAPPHIRE HD2600XT GDR4
DFI RD600 UT ICFX 3200
2X 512 MB MUSHKIN DDR2 800 MHZ 4-4-3-10 2T - 1,8 V
ASUS 360 WATT PSU
WD 250 GB HDD

1.19 Vcore 3040 mhz




Default 2.4 GHZ 1 Vcore

[CraptacularOne]

@ EXPANDER, ahem, please I need the full FPO batch # if you've got it and I cannot add your result until you post a screen shot of it running at 100% load on all four cores. Booting into window means nothing, I can boot my CPU into windows at 4.2Ghz and open CPU-Z but it fails instantly in Prime95. So those screens are of no use to me