DFI P35 Value Motherboard, Infinity INF P35-T2RL BLOOD-IRON

**celemine1Gig** · 09-13-2007, 06:35 AM

Originally Posted by RLM

Definitely something majorly wrong with the board. It's not working anymore. (I shouldn't laugh)

It's the way the vdroop increased over time that was a little odd. I don't understand the ins and outs, you've seem to have a better idea than me, but obviously something had packed in.

Temps were fine. Cpu under water. Fans over the Northbridge and pwm area, aircon on, nothing out of the ordinary in SMG.

That's all by the by now. All packed up now, and ready to return.

RLM

Don't worry. As long as all your other components are still working fine, you're kinda lucky anyway. Seems to have been a monday board. No quality control will ever be able to guarantee 100% working products. Sometimes some parts pass all production tests and fail only shortly after. You can't predict things like that.

Oh, and good luck boblemagnifique. Looks really nice.

Bloody red stairways to heaven.

**Solarfall** · 09-13-2007, 07:45 AM

Originally Posted by boblemagnifique

I recieved my parcel today

Jesus dude.. do you really need that many boards

... 5 boards i case that you screw up few volt mods ???

**natedog420** · 09-13-2007, 09:18 AM

Originally Posted by Solarfall

Jesus dude.. do you really need that many boards

... 5 boards i case that you screw up few volt mods ???

that might be why but i would think he got 5 because he wants no fsb wall on the board. he has very high fsb chips and needs the board to be able to do the same.

**boblemagnifique** · 09-13-2007, 09:47 AM

I have 2 cpus (E6700/E6600) at 591mhz Fsb on water (i hope 630/635 on my chiller) , i have do 642mhz on Dod with the E6700

Wait & See

**boblemagnifique** · 09-13-2007, 11:19 AM

First Boot 570mhz , i test of stability with OCCT at 576x6 on water on the moment .... The Review soon (Saturday i think)

**over@locker886** · 09-13-2007, 11:24 AM

Originally Posted by boblemagnifique

First Boot 570mhz , i test of stability with OCCT at 576x6 on water on the moment .... The Review soon (Saturday i think)

I will wait, good luck!

I have good E6550 at the moment, which can do 582Mhz fsb on air. Can more CPU PLL voltage help to fsb on air?? I want say 1,7v/1,8v -> 2,2v?

**redratamd** · 09-14-2007, 12:14 AM

On this afternoon @home, if UPS it's ok

But i haven't cpu with + 500 fsb.But ,i can test the ram on 700mhz and more.
Wait and see

edit:
@home UPS

I will run a Pi 1m with my 460 ES on 350 X12 and ram on 1:2

DFI VDDR :p
I hope that's possible with waterchill.

**staxm** · 09-14-2007, 05:01 AM

max SS

http://valid.x86-secret.com/show_oc.php?id=240136

Spi1m=10.907s

By staxm

Spi32m=10m 46.641s

By staxm

soon session with LN2

**marcolecorse** · 09-14-2007, 05:12 AM

test week end

**redratamd** · 09-14-2007, 10:09 AM

Nice mobo, i test on this evening with Q6600 B3 and Celeron 460 ES ( X2 ).
Wait and see.

**GripS** · 09-14-2007, 01:41 PM

Originally Posted by marcolecorse

How you figure?

**marcolecorse** · 09-15-2007, 07:40 AM

E6850 aircooling

http://valid.x86-secret.com/show_oc.php?id=242902

**boblemagnifique** · 09-16-2007, 05:47 PM

Few Screens of my Review :

Test On waterchiller (+15/25° liquid)

More Pics and explanations : http://www.ixtremtek.com/forums/showthread.php?t=163

**Solarfall** · 09-16-2007, 10:51 PM

damn boblemagnifique i was looking at that last screenie and i must say that the ram speed and latency that you used is just sick..

what brand of ram do you have ?? the cellchocks that is in your sig ??

**boblemagnifique** · 09-17-2007, 01:38 AM

Originally Posted by Solarfall

damn boblemagnifique i was looking at that last screenie and i must say that the ram speed and latency that you used is just sick..

what brand of ram do you have ?? the cellchocks that is in your sig ??

No my kit is Crucial Pc8500 c5 Prétested for me

But The DFI P35 is very diffcile for the memory, I had much difficulty overclock up of 640mhz

To await next the bios

**marcolecorse** · 09-17-2007, 03:30 AM

Vdimm 2.20

**HousERaT** · 09-19-2007, 07:16 AM

Can someone post picks of the whining (Squeal) area? I'm considering this board but I don't want another P965-S situation. My DFI Dark is so loud that it get's on my nerves.

And thanks for all the info so far........

**Rapier** · 09-19-2007, 08:37 AM

I've had this board a few weeks and I haven't heard any squealing from it (maybe from me). I've had a few nagging issues that I can't seem to get past. I had a G0 Q6600 on it for a couple of weeks, but never could get past 3.5 ghz stable. I wasn't too happy with the chip, so I dropped a E6850 on it and now its doing some wierd stuff.

1. Smart Guardian never worked from day 1, but my mbm setup from my old Asus P5B MBM setup seemed to catch most of the voltages and temps when the Quad was in there. Since I dropped the E6850 in there everything isn't even close to right. Temps are at least 20F too low, volts aren't any better. I could live with Smart Guardian if I could get it running. MBM would be better. Which IT controller chip is in this thing anyway?

2. The E6850 is acting weird. The chip wil getting into XP 1.375 on the vcore. Within a couple of minutes of starting-up Orthos, the system reboots. No errors in Orthos, just reboots. I can jack the voltage on the core as high as 1.45 and it doesn't make any difference. Its not the ram; voltage on it makes no difference. neither does bus speed. This system has been rock stable until this new chip was dropped in. If it can handle a Quad at 3.5 ghz, it should be able to handle a dual core at 3.7 -3.8. The no errors in Orthos and the auto-reboots under load have me puzzled.

**HousERaT** · 09-19-2007, 10:40 AM

sounds like it's time for a fresh install.

**GripS** · 09-19-2007, 10:49 AM

Originally Posted by HousERaT

sounds like it's time for a fresh install.

Not so sure about that. I went from a dual to a quad on the same windows install and the change was seamless. I can't imagine it would be any different the other way around but i could be wrong.

**Rapier** · 09-19-2007, 10:54 AM

Originally Posted by HousERaT

sounds like it's time for a fresh install.

True, I didn't do a fresh windows install when I switched processors. That still doesn't explain, why the Smart Guardian has never worked. Has anybody else got theirs working right on this board?

**Rapier** · 09-20-2007, 06:48 AM

I took it to 500 x 7 for 3.5 ghz at a lower voltage, so its not a FSB issue. I did get Smart Guardian running by doing a complete uninstall of the software and a reinstall. It must of got forked the first time I loaded it.

It still have the no error in Othos and shutdown issue, I talked about above. Does anybody have any suggestions?

**Fresh_Thing** · 09-20-2007, 08:46 AM

I got a little problem with my board !
Its 100% Prime stabel but after i have turn it 30minutes off it wont boot anymore until i must do a cmos reset !!!
Does someone have the same probleme ?!?!

Sorry for my bad english

**Sailindawg** · 09-22-2007, 06:10 AM

Its 100% Prime stabel but after i have turn it 30minutes off it wont boot anymore until i must do a cmos reset !!!

What are you considering P-95 stable? If you are having to reset CMOS in order to boot at your desired overclock, sounds more like your settings are not stable.

To consider an overclock P-95 stable, run P-95 on all cores, at a priority of at least 5, for 8-12 hours with no errors.

**Origin_Unknown** · 09-22-2007, 08:01 AM

are these available to buy yet? or are all these preview boards?

edit; noticed newegg has them, but since im from the uk any idea's where ican get one from? [/edit]

Thread: DFI P35 Value Motherboard, Infinity INF P35-T2RL BLOOD-IRON

Thread Tools

Search Thread

Rate This Thread

Display

some WR with e6420@Blood Iron & DryIce cooling

Bookmarks

Bookmarks

Posting Permissions