O.K., so I would like see the highest FSB you're getting with your Q6600 G0 and actually able to at least get in Windows! Please post Mobo, PSU and Ram and the FPO/BATCH Number. And if possible, a screenshot or even CPUZ Validation. Thanks.
449 or less
450 - 469
470 - 489
490+
O.K., so I would like see the highest FSB you're getting with your Q6600 G0 and actually able to at least get in Windows! Please post Mobo, PSU and Ram and the FPO/BATCH Number. And if possible, a screenshot or even CPUZ Validation. Thanks.
Last edited by nicepun; 09-06-2007 at 01:06 PM.
"You'll find happiness once you accept the inevitable or at least you won't be too pissed off" -- Me
[SIGPIC][/SIGPIC]
System:
- Intel Core 2 Quad Q6600 L725A903 7/31/07 pack date G0
- CPU cooling = Swiftech G4 Storm/Thermochill 120.3/MCP655
- NB chipset cooling = Radiical Chipset Block/Corsair Cool single 120mm fan Rad/MCP350
- Asus Blitz Extreme 0804 bios
- 128MB Gainward FX5200 PCI
- 2x1GB OCZ PC3-14400 Platinum - DDR3-1800 rated at 8-8-8-27 at 1.9v
- 500GB Seagate 7200.10 SATA on SATA1 Port
- LiteOn 165H DVD Burner
- Sony FDD
- 1KW OCZ ProXStream
- WinXP Pro SP2
6x493FSB 3:5 1T
Here's some benchmarks back on 6x cpu multiplier @493FSB to start with. This time I changed command rate on memory as well from 2T to 1T.
Sandra XI SP2
Buffered
Unbuffered
---
450Mhz FSB
L726A
EVGA 680i SLI A1
Antec TPQ 850w
http://valid.x86-secret.com/show_oc.php?id=239025
Not to thread crap, but the FSB is going to be more limited by the mobo than the chip itself, as I'm sure my FSB will go higher on a P35 chipset.
Core i7 3770K
EVGA GTX780 + Surround
EVGA GTX670
EVGA Z77 FTW
8GB (2x4GB) G.Skill 1600Mhz DDR3
Ultra X3 1000w PSU PSU
Windows 7 Pro 64bit
Thermaltake Xaser VI
You're not, it's always good to know results with different hardware combo.Originally Posted by CraptacularOne
"You'll find happiness once you accept the inevitable or at least you won't be too pissed off" -- Me
[SIGPIC][/SIGPIC]
why only Q6600 G0?
http://valid.x86-secret.com/show_oc.php?id=224345
Q6700 G0 L724A
P35-DS4
Giga-EZ 1000w
515FSB dry ice
500FSB air
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
^^^ Very Nice and good Point, but said Q6600 G0 because that's what most of us are running. Also please don't be lazy, please post your setup. Thanks.
"You'll find happiness once you accept the inevitable or at least you won't be too pissed off" -- Me
[SIGPIC][/SIGPIC]
Everything you need to know is in my sig below.
just running 401 for 24/7 use. the extra amount of voltage to the chipset needed for 450 isnt worth the gain imo. I cant tell a diffrence day to day
~
Q6600 G0 L723A730
Evga 680i
OCZ 700w
OCZ PC2-6400 Elpidia IC
450-465~ max fsb (so far..)
CPUZ Valid:
http://valid.x86-secret.com/show_oc.php?id=239834
Other info:
http://www.xtremesystems.org/forums/...&postcount=265
500X7 Prime95 small FFT 30mins
500X8 Superpi32M passed
CPU: XEON W3540 & Gulftown Q3FE
MB: Asus Rampage III Extreme
RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
SSD: Adata S596 120G
Display Card: Asus EAH 5870
WaterCooling:
Laing D5 Pump + Koolance D5 Top
Radiator: KP 120.3
CPU Block: HeatKiller 3.0 + EK full MB Block
PSU: Antec TPQ 1200W OC
Case: SilverStone TJ-07BW
450 was the highest for me (8x450). See my post in the Q6600 overclocking thread. However, this was a stable speed.
No voltage bumps required for anything other than the CPU.
Q6600 G0 L723A674- yeah nicepun it's your chip
Gigabyte P35-DS4 bios F6/ wc- Apogee GT
max FSB:
http://valid.x86-secret.com/show_oc.php?id=239901
max freq:
http://valid.x86-secret.com/show_oc.php?id=239907
Motherboard : DFI P35
RAM : Cellshock 9200
CPU : Q6700 L720A988
Cooling : Water, Laing,Mora,Alphacool NexXxoS XP Rev.2.0
http://valid.x86-secret.com/show_oc.php?id=239645
www.ocaholic.ch
Nice to see quite a few people with 490+ FSB. Keep them coming!!!
"You'll find happiness once you accept the inevitable or at least you won't be too pissed off" -- Me
[SIGPIC][/SIGPIC]
Merc/12.469s/P5K Deluxe/Core 2 Q6600G0 @ 4050MHz/5-5-5-11 2T (540MHz)/Water/09-10-07
Everyday overclcok is 3600 Mhz at 400MHz FSB, 1.46v Vcore.
Lian Li PC 7077A
Dual Watercooling Loops
Asus P5K Deluxe (BIOS 0705)
Core 2 Duo q6600 (3402MHz, 1.41v)
Core 2 Duo e8400 (4682Mhz, 1.57v)
1xXFX 8800GTX XXX
2 Team Xtreme DDR2 800-PC6400 @ 504
2 x 80gb WD in RAID 0
1 x 250GB WD Storage
PC-P&C 750 Silencer
this my Q6600 L724A858 with thermalright 120 xtreme...
http://valid.x86-secret.com/show_oc.php?id=241962
Hi guys!
here's mine, though the problem is that two cores were disabled?
can you help me out here?.. The funny thing is that I could not boot at 470 but boots at 465.. also boots at 490 with only 2 cores.. I did not disable them.. TIA for any help and tips.. thanks!
Specs are in my sig.. thanks..
Last edited by dzeuk_ph; 09-16-2007 at 01:54 AM. Reason: typo
Intel Q6600 G0 2.4GHz L726A
DFI LP UT P35-T2R
2x1GB Team Xtreem 1066MHz Cas5 rated at 2.3V to 2.4V
BFG 8800 Ultra OC
Silverstone Decathlon DA650 PSU
Coolermaster 830 Evo case
1x160GB Seagate Barracuda 7200RPM SATA drive
Samsung DVD writer with lightscribe and SATA interface
Logitech G15 keyboard and G5 mouse
HP w2207 22" LCD
You have 500x9 stable on P5K vanillaEverything you need to know is in my sig below.
Can you give me a shoot with speedfan Vcore graph/charts/ opened and running Prime with over 1.55v. I'm i the only one having problems with this board
Voltage regulators are crap whet it comes to heavily load and they droops me down down and down until prime crashes
i.e. when i set even 1.5 or 1.6v under continuous load with Prime Vcore drops even under 1.4v and when Prime crashes it goes up again
On topic:
470x9 max benched on water MP05LE
720B035 Vid 1.2625v
Edit: Mine is also Vdroop modded
Last edited by DStealth; 09-16-2007 at 02:37 AM.
500x9 is not 100% stable, however i am able to play games for hours @4.5 and run a few benches, i've never been into stabilty only max oc. I don't seem to get any droop on my p5k, if anything the vcore slightly increases under loadYou have 500x9 stable on P5K vanilla
On topic:
470x9 max benched on water MP05LE
720B035 Vid 1.2625v
Edit: Mine is also Vdroop modded
Can't give you any screens atm as i'm at work on nightshift, will try tomorrow if i have time.
I will modify my mach2 soon hopefully i'll see 4.8 on this chip. One more thing i'm well happy with my max oc (4630Mhz) as I only paid £50 for my mach unit which is a lot less than most watercooling kits.
Last edited by DFI pit bull; 09-16-2007 at 12:41 PM.
My highest was 475 x 9.....
I wasn't able to get it 100% stable tho.... It's 100% stable at 450 x 9
~Mike
Main Rig: Intel Core i7 7700k @ 4.2GHz, 64GB of memory, 512GB m.2 SSD, nVidia GTX1080Ti
NAS: QNAP TVS-1282, 8 x 4TB WD Golds(Main Storage Pool), 4 x 960GB M4 Crucial (VM Storage) , 2 x 512GB M.2 Caching
Private Cloud: 4 Nodes (2 x Xeon 5645, 48GB DDR3 ECC/REG, 1 x 1TB HDD, 1 x 960GB SSD/Each)
Distributed Encoding Cloud: 4 Nodes (2 x Xeon x5690, 24GB DDR3 ECC/REG, 1 x 128GB SSD/Each)
Feedback
EBAY:HEAT
9x511MHz , 1.69V Max. Super PI 1M Benchable speed *FSB Limited Chip*
- Q6600 G0 , L721A814 , 07/31/07
- Mouse Pot Rev.3 @ LN2 ~ -120C
- DFI LP UT P35-T2R , BIOS 8/23
- 2x1024Mb D9GMH Corsair C3DF
- SilverStone OP1000 , 1000W
Voltage Settings
CPU VID Control: 1.6000v
CPU VID Special Add: 110% (?)
DRAM Voltage Control: 2.49
SB 1.05V Voltage: 1.217
SB Core/CPU PLL Voltage: 1.75
NB Core Voltage: 1.61
CPU VTT Voltage: 1.60
Vcore Droop Control: Disabled
Clockgen Voltage Control: 3.60v
GTL+ Buffers Strength: Strong
Host Slew Rate: Weak
GTL REF Voltage Control: Disable
x CPU GTL1/3 REF Volt: 115
x CPU GTL 0/2 REF Volt: 115
x North Bridge GTL REF Volt: 115
Last edited by Gorod; 09-16-2007 at 01:41 PM.
WOW... My board is FSB limited.. two GO's, and a B3 max out at ~450MHz FSB.... Are all the DFI boards looking this nice?
9x511MHz , 1.69V Max. Super PI 1M Benchable speed *FSB Limited Chip
- Q6600 G0 , L721A814 , 07/31/07
- Mouse Pot Rev.3 @ LN2 ~ -120C
- DFI LP UT P35-T2R , BIOS 8/23
- 2x1024Mb D9GMH Corsair C3DF
- SilverStone OP1000 , 1000W
Main Rig: Intel Core i7 7700k @ 4.2GHz, 64GB of memory, 512GB m.2 SSD, nVidia GTX1080Ti
NAS: QNAP TVS-1282, 8 x 4TB WD Golds(Main Storage Pool), 4 x 960GB M4 Crucial (VM Storage) , 2 x 512GB M.2 Caching
Private Cloud: 4 Nodes (2 x Xeon 5645, 48GB DDR3 ECC/REG, 1 x 1TB HDD, 1 x 960GB SSD/Each)
Distributed Encoding Cloud: 4 Nodes (2 x Xeon x5690, 24GB DDR3 ECC/REG, 1 x 128GB SSD/Each)
Feedback
EBAY:HEAT
here's mine
highest fsb :
cpuz validation : http://valid.x86-secret.com/show_oc.php?id=244367
highest on 9x multi (aircooling) :
cpuz validation : http://valid.x86-secret.com/show_oc.php?id=244389
tnx
Posting Permissions
Reply With Quote
Bookmarks