Nice chip mnaz, Im sure it will go even further with some cooler air,your temps look good. I thought about the Ultra 120 as its certainly one of the best out there for air but ended up going with another water rig which takes longer to build but ultimately is worth the effort to me. Boatasiaus I have not seen that batch up on any boards yet though I would have to guess you are good to go,they all seem to be good lately. Get a solid board and you will be fine.
The 120 has a 120x38 panaflo on it though. I can't remember how man cfm but its quite a few.
Q6600@3.6GHZ (L726A849)
Thermalright Ultra 120 Extreme (lapped) MX-2 paste
Abit IP35 Pro
2x1GB Ballistix 6400
Asus 5850
WD 250GB Sata II
Pioneer 16x DVDRW
OCZ Gamextreme 600w
They work great. I had one in here a little while back with a Silverstone 120 vari that absolutely cranked. They make excellent sinks and lapping only improves it.
Ok here is what i have so far.
Q6600@3.6GHZ (L726A849)
Thermalright Ultra 120 Extreme (lapped) MX-2 paste
Abit IP35 Pro
2x1GB Ballistix 6400
Asus 5850
WD 250GB Sata II
Pioneer 16x DVDRW
OCZ Gamextreme 600w
i order from newegg.. it is still on its way here from the cali warehouse... most likely it will be a b3... bummer.. statistic shows that the most of the peeps getting from the new jersey warehouse are getting g0 and cali getting b3.
+ Pc-Ao5b [ Lian-Li ]
+ q6600 - b3 [ lapped ] | 3359mhz | 1.35 | 373x9
+ thermalright Hr-01 plus [ lapped ]
+ dfi lanparty ut p35 t2r | bios 10-05-07 beta
+ crucial ballistix pc6400 | team Xtreem c4 pc6400
+ 4x1024 | ddr2 935 | 2.12vdimm | 2t-5-4-4-9
+ evga 8800gts | 600mhz core / 2000mhz ram
+ 160 gigs seagate barracuda II
+ ocz gamextreme 600w
+ windows vista home premium | 32 bit
+ westinghouse 22" monitor
With multiple places available to get a guaranteed 'G0' why in gods name did you go through newegg?
I hope luck brings you a G0 anyway.
i5 2500K @ 4.7ghz 1.32v(+.010 offset LLC set to 4) / ASRock P67 Extreme4 (B3) / 2x4gb Samsung Green MV-3V4G3D @ 1866mhz 1.35v / AMD HD 6850 1gb /2x150gb Velociraptor Raid 0 + 500gb WD Green / Corsair TX 750watt V2
Tankguys latest batch is a GO SLACR 720B. You could always cancell New Egg and grab one.
i didnt research hard enough until i started reading these threads...Originally Posted by GripS
With multiple places available to get a guaranteed 'G0' why in gods name did you go through newegg?
I hope luck brings you a G0 anyway.
too late to cancel, its in transit right now... oh well, if i get a b3... it will be fine, i just want to overclock to 3.2 anyways... its still a a bargain.. under 300 for quadcore
+ Pc-Ao5b [ Lian-Li ]
+ q6600 - b3 [ lapped ] | 3359mhz | 1.35 | 373x9
+ thermalright Hr-01 plus [ lapped ]
+ dfi lanparty ut p35 t2r | bios 10-05-07 beta
+ crucial ballistix pc6400 | team Xtreem c4 pc6400
+ 4x1024 | ddr2 935 | 2.12vdimm | 2t-5-4-4-9
+ evga 8800gts | 600mhz core / 2000mhz ram
+ 160 gigs seagate barracuda II
+ ocz gamextreme 600w
+ windows vista home premium | 32 bit
+ westinghouse 22" monitor
You should be able to return the chip to newegg if the box is unopened.(you can see the batch code on the outside of the box as well as the see through window showing the markings on the surface of the chip) No one likes to wait tho so let's hope you get a G0.
i5 2500K @ 4.7ghz 1.32v(+.010 offset LLC set to 4) / ASRock P67 Extreme4 (B3) / 2x4gb Samsung Green MV-3V4G3D @ 1866mhz 1.35v / AMD HD 6850 1gb /2x150gb Velociraptor Raid 0 + 500gb WD Green / Corsair TX 750watt V2
Don't be so pessimistic, I'm sure you have a chance of 50% to get a G0, and if you still get a B3, with nice cooling, you can achieve almost same overclock as a G0.
would they charge me a restocking fee, if its unopen... if its not a g0 i would return it in a heartbeat.... i hope i get a g0 too
+ Pc-Ao5b [ Lian-Li ]
+ q6600 - b3 [ lapped ] | 3359mhz | 1.35 | 373x9
+ thermalright Hr-01 plus [ lapped ]
+ dfi lanparty ut p35 t2r | bios 10-05-07 beta
+ crucial ballistix pc6400 | team Xtreem c4 pc6400
+ 4x1024 | ddr2 935 | 2.12vdimm | 2t-5-4-4-9
+ evga 8800gts | 600mhz core / 2000mhz ram
+ 160 gigs seagate barracuda II
+ ocz gamextreme 600w
+ windows vista home premium | 32 bit
+ westinghouse 22" monitor
Figured I'd add mine.
ClubIT
Q6600 g0
Batch # L723A964
1.35V max
I haven't seen anyone else with this particular batch number. Actually I'm still confused as to how to decode the batch number. Someone want to fill me in?
I have that batch and am running 3.53 at 1.40 vCore (real) stable for several days now folding...
Never empower an idiot with a response....
http://en.wikipedia.org/wiki/Troll_%28Internet%29
Seller/Buyer Reputation:
Heatware: http://www.heatware.com/eval.php?id=50905
Ebay: {Family Account} Kasyg3 http://myworld.ebay.com/kasyg3/
Ebay: {My personal Account} Sdumper http://myworld.ebay.com/sdumper/
iTrader: http://www.blazingpc.com/forum/itrader.php?u=28
From todays posted reviews quite a few reporting getting G0 from Cal.,
been quite a few reports of GO from NJ & now others are reporting the TN outlet is shipping them.
{AB9 QuadGT * CPU 6320 7x466 @ 3.260Ghz}
{SuperTalent 2x512 DDR2 PC6400 @ 932Mhz 4-4-4-12 2T}
{Fatal1ty AN9 32X * CPU 4800+ 11x275 @ 3.025Ghz 2x1g cache}
{SuperTalent 2x512 PC6400 @ 1039Mhz 5-5-5-15 2T}
{AN8-V Opte 165 @ 9x300=2705}.{AV8 3200+ Venice 9x300=2704}
{NI8 805 @ 3.8}....{AG8 630 @ 3.66}....{AS8 640 @ 3870}
{AN7 @ 2.3}..{HP Laptop 3200 Venice @ 2.0}=F@H 24/7}
i hope so, my shipment comes in tomorrow... wish me luck... i will get a g0 regardless... even if it means i have to return it and by it somewhere else
+ Pc-Ao5b [ Lian-Li ]
+ q6600 - b3 [ lapped ] | 3359mhz | 1.35 | 373x9
+ thermalright Hr-01 plus [ lapped ]
+ dfi lanparty ut p35 t2r | bios 10-05-07 beta
+ crucial ballistix pc6400 | team Xtreem c4 pc6400
+ 4x1024 | ddr2 935 | 2.12vdimm | 2t-5-4-4-9
+ evga 8800gts | 600mhz core / 2000mhz ram
+ 160 gigs seagate barracuda II
+ ocz gamextreme 600w
+ windows vista home premium | 32 bit
+ westinghouse 22" monitor
see my sig...
Q6600 L723A (400 x9)
Evga 780i P02
G.skill 8 GB
Evga GTX 280
Raptor X (3) 150's Raid 0
Targen BZ 1100w
Thermalright Ultra Extreme 120
Vista Ultimate x64
Xclio
Got a new Q6600 from ClubIt today batch: L724B175 VID: 1.2625v OEM, not retail..
Here is a quick test of two hours prime stable & its lowest vcore set in bios 1.2625v.
Just wanted to see how far it would go & still be stable without moving the voltage.
I did bump the MCH one notch was all, everything else was at stock setting except ram.
Load shot note actual vcore is only 1.19v real volts under load.
I'll do more testing later on, letting it burn in some at 3.2.
batch: L724B175 is probably what you can expect if you order the OEM version ClubIt has for now.
Last edited by TheWolf; 09-15-2007 at 05:58 PM.
{AB9 QuadGT * CPU 6320 7x466 @ 3.260Ghz}
{SuperTalent 2x512 DDR2 PC6400 @ 932Mhz 4-4-4-12 2T}
{Fatal1ty AN9 32X * CPU 4800+ 11x275 @ 3.025Ghz 2x1g cache}
{SuperTalent 2x512 PC6400 @ 1039Mhz 5-5-5-15 2T}
{AN8-V Opte 165 @ 9x300=2705}.{AV8 3200+ Venice 9x300=2704}
{NI8 805 @ 3.8}....{AG8 630 @ 3.66}....{AS8 640 @ 3870}
{AN7 @ 2.3}..{HP Laptop 3200 Venice @ 2.0}=F@H 24/7}
uhhh, i think not good, but... not bad
room 15°C, core 22°C, idle... watercooler
specs -> Q6600 (L721A) under P5K Deluxe, and 512mb ddr2 667 5-5-5-15 @ 860 5-5-5-15, im waiting for 2gb crucial ballistix tracer 800 =P
q6600 boots in 430*9 = 1.45v (full stable) 450*9 = 1.55v (don't post/boot) =(
Q6600 G0 (L721A) @3Ghz 1.2v
P5K Deluxe
2x1GB Team Xtream DDR2 800 @ 1066 5-5-5-12 2.2v
XFX 7900GT 470/1370 @ 530/1800
Enermax Liberty 500w
Just got mine from ClubIT,
Q6600 G0 SLACR
L726A855
1.35v max
Have not tested it yet...
I got L721 SL9UM (B3) from Newegg NJ yesterday.
So far 3.24 Ghz @ 1.31v loaded prime stable. Droop is a killer, was .3 with E6420 and .6 with quad. Double the cores, double the droop. EDIT: it's priming 3.3 @ 1.31v loaded now.
Running some benches, Dirt is smoother with quad gained about 10 FPS avg @ 1280x1024 4xAA (my 19" GX2 90 max is 1280x1024). MOHA never drops below 100 fps, RS Vegas never below 100 fps with aa though. Gained 1700 points in 3dmark 06 CPU score from 3300 @ 3.7Ghz E6420 to 5000 with 3.2 Quad.
So far gaming is smoother with a quad.
Last edited by dnottis; 10-02-2007 at 07:27 AM.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Please let me know as I just got an L726A85*4*...I wish you the best of luck
Sorry for the edit, wrong smiley
Last edited by h@RRy; 10-02-2007 at 10:00 AM.
Mine just came in from ClubIT today too.
Of course G0, they advertise at time of purchase.
Batch: L731A364. Look like this is a much latter week than everyone elses. Hope the OC goes well. Haven't started the OC.....yet
I just got in the rest of my parts and can now start building finally. My quad is a L726A849 going on a 120.3 of its own, Case is a brand new stacker old style getting stripped as I type this and fitted for the rad. Should be interesting.
Last edited by flesheatinvirus; 10-02-2007 at 02:52 PM.
So far, it has been great, BUT my motherboard (BadAxe2) (AGAIN) has prevented me from overclocking it to it's full potential. @ default voltage, it is ROCK stable @ 3.15 ghz (my old CPU, an E6600 needed much more voltage to be stable at that speed and was my max too on it, so it must be my boards limit), so it looks like that I will need a different board if I want to push this one any higher.Please let me know as I just got an L726A85*4*...I wish you the best of luck
Sorry for the edit, wrong smiley
1. Newegg
2. 10-4-07
3 b3 sl9um L719B168
Just got it in today, along with a DFI LP UT P35 T2R, a Tuniq T-120-LFB, and Gskill F2-8000CL5D-4GBPQ.
Upgrading from what's in my sig.
Last edited by thanatos355; 10-05-2007 at 05:30 PM.
DFI NF4 Ultra-D | Opteron 165 CCBBE 0610DPMW @ 312x9 @ 1.35v | 1024mb G.Skill F1-3200DSU2 LC | Thermalright SI-128 | Leadtek 8800GTS 640 @ 655/1100 | Audigy 2 ZS Gamer Edition | Corsair HX620 | 2x Maxtor 500 2x Maxtor 300 | Liteon SHM-165H6S | Sony CRX300E | Raidmax 668w.
Posting Permissions
Reply With Quote
Bookmarks