Well, as we all know Vista is terrible with any video benches. I could run this same setup on XP and prolly get a much better score.. 3DMark is terrible on here as well![]()
Well, as we all know Vista is terrible with any video benches. I could run this same setup on XP and prolly get a much better score.. 3DMark is terrible on here as well![]()
I wish I knew this 12 hours ago, I was running version 9.5 last night at 4.95Ghz.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
here's my qx6700 at 3.6Ghz in 64bit under vista x64.
Last edited by safan80; 08-15-2007 at 09:40 PM.
Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card
LSI series raid controller
SSDs: Crucial C300 256GB
Standard drives: Seagate ST32000641AS & WD 1TB black
OSes: Linux and Windows x64
I just ran mine at 3.78ghz... Not to bad
![]()
Just tried 10x333..
can you say BLUESCREEN!![]()
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Hey DengYong, what are your voltage settings?
i couldnt pass from 3.2 ghz yet, tried some voltage settings but didnt achieve succsess on reaching 3.4 or 3.6.
Vcore 1.39(reading 1.36 on everest)
1.45 on HT(reading 1.47 on everest)
Cpu VTT 1.45
Memories are @ 900 mhz, 4-4-3-6 and 2 T.
i wonder if theres something wrong with my setup, i dunno, i had to remove battery and start the system without it, to enter bios again, when tried to pass from 3.2 ghz sometimes...
Starting with battery on(and clearing cmos on all the ways) would just freeze me on the bios startup screen, but no response....
any tips on the oc setting?
see my sig for full spec:
![]()
My recent configuration:
Asus P5K Deluxe
Intel Q6600 @ 3.2ghz (8 x 400 @ 1.37v) | Batch: L644G508
4 GB G.Skill F2-6400 CL4-GBHK @ DDR2 800(2.05v) 2T | 4-4-3-5
Samsung 400 GB Sata2
EVGA 8800 Ultra 768MB | 3D Mark 06 score: 14.400
Seventeam ST-750EAJ
Gemin2 | (evercool 120 mm Aluminium)
Dead mobos: 1![]()
Model: Striker Extreme![]()
here's mine again (qx6700 at 3.6Ghz) but this time under xp x32.
xp winsin opengl of course .
xp: 6261
vista x64: 4632
Last edited by safan80; 08-15-2007 at 09:46 PM.
Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card
LSI series raid controller
SSDs: Crucial C300 256GB
Standard drives: Seagate ST32000641AS & WD 1TB black
OSes: Linux and Windows x64
Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card
LSI series raid controller
SSDs: Crucial C300 256GB
Standard drives: Seagate ST32000641AS & WD 1TB black
OSes: Linux and Windows x64
I think its time to get a single kentsfield![]()
I run that for another guy for WCG. I do a few benches on it but WCG is it's role in life. That one won't get wet unless it's something he wants to do.
That's a possibility
Why would I want to hinder myself so with only 1/2 the cores meeded to play on cinebench?![]()
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
My recent configuration:
Asus P5K Deluxe
Intel Q6600 @ 3.2ghz (8 x 400 @ 1.37v) | Batch: L644G508
4 GB G.Skill F2-6400 CL4-GBHK @ DDR2 800(2.05v) 2T | 4-4-3-5
Samsung 400 GB Sata2
EVGA 8800 Ultra 768MB | 3D Mark 06 score: 14.400
Seventeam ST-750EAJ
Gemin2 | (evercool 120 mm Aluminium)
Dead mobos: 1![]()
Model: Striker Extreme![]()
This is what I get on my FXs.. Glad to see the AMD scales as good across 2 sockets as the Intel does across its single chip. (4 cores total)
ASRock X399 Fatal1ty
1950x Threadripper
32gb DDR4
GTX 1070
__________________________________________________ ____
Last edited by safan80; 08-16-2007 at 03:09 PM.
Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card
LSI series raid controller
SSDs: Crucial C300 256GB
Standard drives: Seagate ST32000641AS & WD 1TB black
OSes: Linux and Windows x64
safan80: how nice now we know...
ontopic: Really nice results some of you got, I got like 3 minutes and something, shut it down due to anger of the long time =P
going for a Q6600 in a month![]()
i7 2600K 4.9Ghz @ 1.424v, Noctua NH-D14, Asus P8P67, 16GB Corsair XMS3 1600Mhz, GB GeForce GTX 460 OC, OCZ 600W PSU - www.LV-88.com
veilsidebr here's my volts for 3.4
cpu 1.49v actual, fsb 1.4v, spp 1.40v, mcp 1.50v, ht 1.2v
pci-e @ 130
3.5 takes about 1.55v actual
I don't do benchmarks very often I'm mainly a gamer.
QX6700 @ 3.7
Win Xp Pro 32bit. No tweaks.
jeez Rip, do you use a magnified glass to see that?
Bookmarks