Cpu-z 1.40.8

[cpuz]

The two programs may be conflicting.

To all please :
If you notice any problem with cpuz, please do the following :

- if the program does not lock-up, please save a register dump (in the last tab) and send it to me (cpuz [ at ] cpuid.org) with a short description of the probelm.

- if cpuz causes the system to lock-up, please go to this page :
http://forum.x86-secret.com/showthread.php?t=4402
and refer to Q4.

Thanks !

[Baron]

Mail has been sent with register dump cpuz.

[dinos22]

hello Franck

did some benching today with a few different boards and noticed that this version of CPUz does not respond to F7 command any more

F5 screenshots work great but F7 validation don't which is a shame as i tested my E6700 past 5GHz but only F5 screenshot was on the drive



vcore works great

[CoolZone]

downloaded the file and now the program is 1.40.9

[cpuz]

No , but CPU-Z 1.39 reads it better cpu-z is jumping between 1.319v - 1.328v ( measered 1.346v , biossetting 1.350v )
I got a dumpfile attached.

Would you mind listing all voltages reported by your BIOS ? (named and values).
The P5N32 has three sensors, and I'm afraid I'm a bit lost in figuring out what is what.

[cpuz]

hello Franck

did some benching today with a few different boards and noticed that this version of CPUz does not respond to F7 command any more

F5 screenshots work great but F7 validation don't which is a shame as i tested my E6700 past 5GHz but only F5 screenshot was on the drive

vcore works great

oh yes validation is disabled because it is a beta version.

[dab420]

oh yes validation is disabled because it is a beta version.

That answers my question about validation not working then...

[i found nemo]

works gr8

[dinos22]

oh yes validation is disabled because it is a beta version.

oh i see

damn i guess we all learn from experience

[mukmaster]

My vcore core is still inaccurate.It's around 1.15 in CPUz , actual Vcore is 1.450

[xenoasd]

my vcore is not accurate.. i have mines at 1.4V but it says 1.360V

[adamsleath]

mine says 1.40.9
it reads my voltage finamundo.
speedfan 4.32: 1.39 v
cpuz 1.40.9: 1.392 v
pc probeII: 1.39 v

[fullmetal]

i dunno, the one i downloaded from richard and the final version give me the same problem

1. Wrong voltages or jumps from like 1.1 to 1.3( pretty weird to me)
2. The multiplier is jumping from 6 to 9 and back to 6 in like 1 second. My multiplier is locked at nine, Version 1.38 shows it locked at 9 but showing is 6 is weird. I dunno what to do.

If u can help me that would be great i use a e6600 and an intel 975xbx

[GoThr3k]

i dunno, the one i downloaded from richard and the final version give me the same problem

1. Wrong voltages or jumps from like 1.1 to 1.3( pretty weird to me)
2. The multiplier is jumping from 6 to 9 and back to 6 in like 1 second. My multiplier is locked at nine, Version 1.38 shows it locked at 9 but showing is 6 is weird. I dunno what to do.

If u can help me that would be great i use a e6600 and an intel 975xbx

EIST???

[Cranox]

Would you mind listing all voltages reported by your BIOS ? (named and values).
The P5N32 has three sensors, and I'm afraid I'm a bit lost in figuring out what is what.

Mail with info/dumps send.

[KiD0M4N]

Hi Cpuz,

Ever though of integrating a temp read out in the first main tab? That would really kill the need to list out the temperatures from another program.

Regards K