3Dmark06=23211, 4.8G quadcore, Uni Copper Pot First Strike

[VictorWang]

Ha, ha, ha.......Nice going my friend.....

Yeap.......I'll play this week 420MHz fsb x 12 = 5040MHz the QUAD and 1035/1224MHz VGAs....Stay tuned.....

420*12 on 680i ? can't wait to see the results !

Good stuff Victor.

Very nice looking pot. I am getting really good results from the Vapo with the G0 as well.

Switching over to SLI now, I have a new board and bios that is to allow me more FSB and bandwidth. Ill post results/deatils tonight.

thx charles, which mobo allows more fsb for a sli setup ?
DFI is good, but...the slot space is a too small for my vga pots and digipwm hot like hell

[hipro5]

420*12 on 680i ? can't wait to see the results !

I've done it with VGAs at low frequency......If you see my latest 2k6 bench, it was done at 420MHz fsb (and lower freq)....
Though I need to consentrate on CPU's temps during the bench, I'll bring a friend of mine so to help me out by pooring LN2 in one of the VGAs and I'll have the other one and the CPU......I can't do it alone with 3 x pots and ALL of them at the "edge".....

[Philly_Boy]

Nice results, Victor! I learn so much watching you, George and Vince bench...

[Charles Wirth]

P30 bios and a new 680i board from Evga, there was some hope as I got everything setup but I ran into a problem last few items to install for benching.

My boards will no longer fire up a qx6850, oddly something happened to my chip. I will try again in a 650i to confirm. The boards fired up with the QX6700 fine.

Never even had a chance to get it up to speed under the cascade.

My vapo is a beast though, I can pi, am3 and 2k1 at 4.65ghz, trying for until I get a replacement or bios update.

[hecktic]

P30 bios and a new 680i board from Evga, there was some hope as I got everything setup but I ran into a problem last few items to install for benching.

My boards will no longer fire up a qx6850, oddly something happened to my chip. I will try again in a 650i to confirm. The boards fired up with the QX6700 fine.

Never even had a chance to get it up to speed under the cascade.

My vapo is a beast though, I can pi, am3 and 2k1 at 4.65ghz, trying for until I get a replacement or bios update.

So P30 is to blame?

[Charles Wirth]

Not sure yet, Ive been in contact with Nvidia and Evga and detailed the problem.

Hopefully a bios update fixes me.

The bios was working, I did complete the XP install.

[VictorWang]

I've done it with VGAs at low frequency......If you see my latest 2k6 bench, it was done at 420MHz fsb (and lower freq)....
Though I need to consentrate on CPU's temps during the bench, I'll bring a friend of mine so to help me out by pooring LN2 in one of the VGAs and I'll have the other one and the CPU......I can't do it alone with 3 x pots and ALL of them at the "edge".....

seems u've already done
yes, controlling 3*pots under LN2 is nightmare and it's mission impossible to running CPU on the edge.

P30 bios and a new 680i board from Evga, there was some hope as I got everything setup but I ran into a problem last few items to install for benching.

My boards will no longer fire up a qx6850, oddly something happened to my chip. I will try again in a 650i to confirm. The boards fired up with the QX6700 fine.

Never even had a chance to get it up to speed under the cascade.

My vapo is a beast though, I can pi, am3 and 2k1 at 4.65ghz, trying for until I get a replacement or bios update.

evga 680i, I dont think the pwm can provide good enough power to cpu.
and award bios is not good for qx6850.
as I've tried on DFI, >333fsb becomes unstable while qx6800 can stable at 400fsb.
you got good cooling there, waiting for ur results