Asus P5K "Vanilla" vmods

[Achill3uS]

Thank you NewBeetle-san
First post updated with the correct vcore and vdroop mod.

[Achill3uS]

I did vdroop in the "kyosen way" and its working flawlessly, nut I used 50k (with 10-20k it should work OK also).

Sorry but I dont have a pic of the board, so I can only say that vmch mod is 6th leg of the IC wich is marked in Achillus photo to ground by 10k pot.

So whats your problem now? the vMCH mod didnt work for you? or you dont try'd it yet? I think its good marked, the same points like by the P5B, but anyway, I try it

[ent]

So whats your problem now? the vMCH mod didnt work for you? or you dont try'd it yet? I think its good marked, the same points like by the P5B, but anyway, I try it

Sorry, I didn't make it clear

I did the mod and its working but not in the way from your pic.

On your pic you marked 50k pot between 2nd and 7th pin of the APW Controller. It should be 50k(i recommend 10k) between 6th pin(FB) and 3rd leg (ground). Like the Vdimm mod.

[dnottis]

Im assuming the vdroop mod can be penciled?

[Boogerlad]

r these vmods compatible with the p5k-v? it's the same pcb, except for it using the g33 chipset. i want to do a pencil vdroop mod so baddly

[Chaos-PL]

so... is there a confirmed vdroop mod for P5K ?

[Moonman]

Anyone got OVP mod for P5K ?

Need more than 1.92V for our E6700.

[DEVIL K-ce]

so... is there a confirmed vdroop mod for P5K ?

Pencil or VR to SMD and go clocking

[Nosfer@tu]

More pictures here
http://www.octeamdenmark.com/forums/...read.php?t=167

Anyone got OVP mod for P5K ?

Need more than 1.92V for our E6700.

I dont know an OVP mod, but if there isent one, you migth be able to connect the 3.3 Volt line to the CPU and controll the volt with a resistor.

That was done on some of the AMD based motherboards a few years back!

[Eldonko]

Thanks for posting, Ill do these mods!

[Chaos-PL]

Pencil or VR to SMD and go clocking

http://img297.imageshack.us/img297/4809/vdroopri0.jpg

its working?
somebody wrote that its not working ...
you use it yourself? pencil or vr?

[Bail_w]

Any confirmed Pencil Vdrop mod? Thanks

EDit: I did this pencil mod and it works prefectly.

[DEVIL K-ce]

its working?
somebody wrote that its not working ...
you use it yourself? pencil or vr?

Yes working ok Set 1.55V in bios and get real 1.6V and no droop.


Martin

[funkflix]

Anyone saved the missing screen for Vmch? I really need the reading point for it, better now then later.. Thanks in advance!

[Learn]

[funkflix]

Very fast, thanks a lot Learn!

[Chaos-PL]

http://www.overclocking-jp.eu/public/vmods/100_6857rvddr2.jpg

this point makes things a lot easier ;]

[Learn]

Very fast, thanks a lot Learn!

No problem

this point makes things a lot easier ;]

After the inductor and capacitor.

[xt0m]

No problem

After the inductor and capacitor.

Long time no see learn
Where have you been hiding

[Learn]

Long time no see learn
Where have you been hiding

I do not post much
/Sorry for the OT

[DEVIL K-ce]

Vmch do nothing - 1.5V or 1.8V and the same FSB.


Martin

[Nosfer@tu]

I do not post much
/Sorry for the OT

You should You have alot to bring to the game

[Achill3uS]

Vmch do nothing - 1.5V or 1.8V and the same FSB.


Martin

On your pic you marked 50k pot between 2nd and 7th pin of the APW Controller. It should be 50k(i recommend 10k) between 6th pin(FB) and 3rd leg (ground). Like the Vdimm mod.

by ent (little upper) but thanks for the report, will be changed, still i dont have the mobo, so cant try it..

[865pe]

this vdrop mod my P5KC work?

[podvarak]

On your pic you marked 50k pot between 2nd and 7th pin of the APW Controller. It should be 50k(i recommend 10k) between 6th pin(FB) and 3rd leg (ground). Like the Vdimm mod.

Just to confirm that this version is working ok