Cedar Mill 631 @ 6.800 Mhz - LN2 - WR

[ojdr2001]

Today me and Silence (my son), we had our first LN2 session. Before we move to X6800XE we started with a Cedar Mill 631 to get familiar with LN2 and we got the WR for Cpuz-validated ss.

One more 1st place for OCX Team Insano

Also, a lot of fun with LN2

Board. P5W64 WS Pro
Vcore: 1,72V
VMCH: 1,9V

The setup before starting with LN2:



Starting filling mousepot (Rev 1) with LN2:



Temps in Windows with ASUS Probe:



Temps showed in TM, -174 inside the pot, -171 in pot base:



The World Record:

http://valid.x86-secret.com/show_oc?id=133611



After the WR and session finished:

[Gebba]

this very high speeds
did you run any superpi?
congrats!!! ;D

[[_Silence_]]

this very high speeds
did you run any superpi?
congrats!!! ;D

We didn't run any benchs, this session was only for learning and to try to take the 631 WR

[DaCoSa]

congratulations ojdr2001

regards

[NickS]

Awesome job guys. Wish you ran 1M though .

[phelan1777]

THat is insane!

[Noob-ftw]

Wow, father and son team world record! I wish my Dad helped me do something like that.

[sierra_bound]

Nice first effort.

[SwimmerBoy]

First try and a WR... How many WR are going to fall tomorow? :p

Congrats

[charlie]

I've been thinking lately... I'd like to see someone take a Cedar Mill 670 and a modern C2D motherboard like a P5W64 or P5B or AW9D and go for the 7.6gHz "worlds fastest CPU" WR... that was set a while ago on an inferior board. Might be possible to beat it.

[Onepagebook]

Awesome extreme action, nicely done.

[dukenukem]

Just amazing.congrats on the record.

[TaPaKaH]

The thing that has limited previous WR for 631 was FSB (mobos then could not go over 450MHz) but with Conroe mobos I think that there`s more WRs to come

[ANP !!!]

A.M.A.Z.I.N.G

[ojdr2001]

Thank you all

No doubt these new c2d mobos help a lot with these type of cpu's... FSB is much easier to obtain...

The 6.800 mhz was to easy and at least 7 Ghz is perfectly possible with this setup but our goal was to get familiar with LN2 in first place.

I will try later the 7 Ghz and do some PI. Training for the X6800

[lawrywild]

Awesome work, Congrats Guys

[Gebba]

I've been thinking lately... I'd like to see someone take a Cedar Mill 670 and a modern C2D motherboard like a P5W64 or P5B or AW9D and go for the 7.6gHz "worlds fastest CPU" WR... that was set a while ago on an inferior board. Might be possible to beat it.

maby celeron 3,33ghz 65nm and ln2
whit 25x multi you don´t need so mutch fsb,and celeron are very cheap

[barzi]

woow awesome!! congrats with WR

[eva2000]

Wow, father and son team world record! I wish my Dad helped me do something like that.

yeah wow father and son team

[TaPaKaH]

waiting for you to beat overall CedarMill WR (7GHz+)

Did you try more Vcore ? 1.72V is not so much usually guys @ 7GHz put 1.85V+

[Kunaak]

why not just try a P5B Deluxe?

those are known to hit 500+ really easily, where as you had a 975X board, which while a good board... usually hits its limit between 450- 470 mhz... which is right where you hit the limit of the CPU.

you might be able to get more from the same CPU with the P5B Deluxe.

[CaNNibaL]

why not just try a P5B Deluxe?

those are known to hit 500+ really easily, where as you had a 975X board, which while a good board... usually hits its limit between 450- 470 mhz... which is right where you hit the limit of the CPU.

you might be able to get more from the same CPU with the P5B Deluxe.

I Agree, Although those are awesome results ! Go on PT mates

[Radamanthys]

Amaizing speeds !!! Congrats Man!!!

[ojdr2001]

Thank you people

Did you try more Vcore ? 1.72V is not so much usually guys @ 7GHz put 1.85V+

Not yet... that was a quick run. Will go for 7 Ghz++ next

why not just try a P5B Deluxe?

I'd like to but don´t own one and the idea was to train for X6800 on P5W64

[|RickY|]

love it congrats