Should I replace with a zalman vf900? or keep the stock? I really want to know cause this thing get very very hot on a warm summer day, about 70c.
Thanks
Should I replace with a zalman vf900? or keep the stock? I really want to know cause this thing get very very hot on a warm summer day, about 70c.
Thanks
Celeron 326 (Until E6600)
Gigabyte Ds3
2gb DDR2 Gskill 667
ATI X1900XT 512MB
36gb Raptor
vf900 performs WORSE than the stock... i would say accelero x2...
Rig:
Pentium D 805 3.8 GHz and counting, w/Big Typhoon (hopefully E6600 at christmas)
eVga 7900GT KO Reload, 508/1525 stock volts
MOBO SWITCH! P5B deluxe![]()
2 GB Patriot ddr2-667 4-4-4-12
Antec NeoHE 550
250GB Seagate 7200.10
Thermaltake Soprano w/2xAspire 120mm and 1xThermaltake 90mm
Dell 19'' LCD monitor
Heat
can i get a review of the accelero x2 vs stock hsf?
Celeron 326 (Until E6600)
Gigabyte Ds3
2gb DDR2 Gskill 667
ATI X1900XT 512MB
36gb Raptor
Rig:
Pentium D 805 3.8 GHz and counting, w/Big Typhoon (hopefully E6600 at christmas)
eVga 7900GT KO Reload, 508/1525 stock volts
MOBO SWITCH! P5B deluxe![]()
2 GB Patriot ddr2-667 4-4-4-12
Antec NeoHE 550
250GB Seagate 7200.10
Thermaltake Soprano w/2xAspire 120mm and 1xThermaltake 90mm
Dell 19'' LCD monitor
Heat
wow your an, since i already looked and found nothing
Celeron 326 (Until E6600)
Gigabyte Ds3
2gb DDR2 Gskill 667
ATI X1900XT 512MB
36gb Raptor
/\Originally Posted by [TAG]Imp
|
|
Stupid Suggestion. VF900 does outperform stock, but not by much...the accelero has performance lower than stock...and it ALWAYS increases mobo temps by some ~5C at full fan speed.
Perkam
not true at all... VF900 is worse than stock, and accelero is better, but it does increase case temps, i'll give you that..Originally Posted by perkam
Rig:
Pentium D 805 3.8 GHz and counting, w/Big Typhoon (hopefully E6600 at christmas)
eVga 7900GT KO Reload, 508/1525 stock volts
MOBO SWITCH! P5B deluxe![]()
2 GB Patriot ddr2-667 4-4-4-12
Antec NeoHE 550
250GB Seagate 7200.10
Thermaltake Soprano w/2xAspire 120mm and 1xThermaltake 90mm
Dell 19'' LCD monitor
Heat
This has been my experience as well. In fact, I just stuck the Accelero on a few hours ago. Here's what I found...Originally Posted by [TAG]Imp
X1900XT
Ambient temp of 24C
Antec P180 3 Tricool's on Med: 1 middle front, 1 middle rear, 1 HDD
Fear Combat for 10 minutes
Zalman VF900 @ 100%
Arctic Ceramique
GPU: 79C
CPU: 41C
SYS: 41C
Accelero X2 @ 100%
Arctic Ceramique
GPU: 69C
CPU: 39C
SYS: 45C
The Accelero has the added bonus of being almost silent, whereas the Zalman can be heard...don't get me started on the leaf blower. So I'll def be keeping the Accelero, but I may stick another fan up top to help with system flow. Why oh why couldn't AC just stick to DHES...
As we're on the topic, how loud is the X1900XT (in decibels average)? I heard it's loud and i want to know...im picking one up in 2 weeks
Gaming Rig:
Intel Core 2 Duo E6600 @ 3.15GHz w/Stock Intel HSF L704A945
Asus P5N32-e SLi Plus Motherboard BIOS 1401
3X1GB Corsair XMS2 DDR2 800Mhz RAM 4-4-4-12
ATI Radeon 5970 E
Seagate Barracuda 320GB HDD 16MB Cache SATA2
Seagate Barracuda 500GB HDD 32MB Cache SATA2
OCZ StealthXStream 700W PSU
Samsung 18X Dual Layer DVD Burner SATA
Samsung 22X Dual Layer DVD Burner SATA
Thermaltake Soprano Black ATX Case with Window
Logitech G11 Gaming Keyboard
Logitech G5 Gaming Laser Mouse
Logitech X-230 2.1 Speaker system
Samsung 205BW 20" Widescreen LCD Monitor
Windows 7 Professional x64
bottomline is : there's no good replacement cooler for X1900 :'(
i still wonder why noone has made a good silent replacement fan that's actually using the exaust from the pcb...
i got the VF900 as it was available at a shop near me, but i'm still wondering if i put it on or not ... i was very happy with my VF700 @ 6800 Gt though
as an accelero owner, there is no good replacement as the last post said. i have good case ariflow so the x2 isnt too bad, but as cooling performance goes, the only thing thats noticeably better than stock is water cooling...
Core i7 920 3849B028 4.2ghz cooled by ek hf | 6gb stt ddr3 2100 | MSI HD6950 cf cooled by ek fc | Evga x58 e760 Classified | 120gb G.Skill Phoenix Pro | Modded Rocketfish case + 1200w toughpower | mcp 655 pump + mcr 320 + black ice pro II
When the X2 was in my Stacker, I noticed a 1C difference in system temps. The only reason the P180 is different...a single 120 exhaust as opposed to 2. I've had experience with 2 cases, 2 19XT's, a VF900, a VF700, Stock, and 2 Acceleros. I can fully recommend the Accelero over all. It cools as well as Stock at 100% and as long as you have at least a single 120mm, you need not worry about system temps.
The Stock fan RUINS my day. It IS a hair dryer. There are av files on the tech report and a few other sites if you need confirmation. The Zalmans are much quieter, but did not perform on par to the Accelero's. Not to mention, the Accelero's silent, the Zalmans were not.
I don't believe I'm alone in the Accelero > Zalman/Stock fan either. Someone put up a compilation of temps and then there's the madshrimps review as well.
cky2k6:
What are you using to cool it now?
its a beast at full rpm, but you need ati tool to do it, but it will rarely go at 5,000 rpm.Originally Posted by Radeon117X
Celeron 326 (Until E6600)
Gigabyte Ds3
2gb DDR2 Gskill 667
ATI X1900XT 512MB
36gb Raptor
Bookmarks