TeamGroup TXDD2048M800HC4DC 2GB 4-4-4-10 DDR2 800Mhz

[Corbu']

I can't find any review for this ram, what is the maximum stable frequency and what is the maximum safe voltage? Also what ICs are on these sticks ?

[Mikesta]

I'm interested as well.

I can't wait too long for Tankguys to get the 3-3-3-8 667mhz stuff in. It's either this stuff or the G-Skill from newegg.

[TankGuys]

The 3-3-3-8 stuff should be here Friday

[Richard Dower]

Do tank ship internationally?...like say where i live, Ireland?

[smids]

Do tank ship internationally?...like say where i live, Ireland?

http://www.memory-configurator.com/p...kit/index.html

Irish based company where I got mine from!

[TankGuys]

Do tank ship internationally?...like say where i live, Ireland?

Yes, but you'd likely be better off buying from the site that was linked in the post below yours

[Ati007]

Hello Guys!
Is this memo full compatible with asus p5wdh mobo?
What kind of chips on this memo?
I gonna use with E6600 which able to run on 3.6 (9*400) what do you think how much will the maximum mhz on what timing?
THX

[Ati007]

No answer here ((
But I found out bymyself and it's compatible ))) http://www.kepfeltoltes.hu/060905/Xt...toltes.hu_.jpg

[Max Tractor]

I have also been looking for info on these, pretty hard to find

[Dublin_Gunner]

Yup, cant find info on IC's anywhere.

Have a set arriving tomorrow

[Micutzu]

I can't find any review for this ram, what is the maximum stable frequency and what is the maximum safe voltage? Also what ICs are on these sticks ?

- They have Micron D9GMH chips;
- it worked OK with Asus P5WDH for me, but i've seen reports of some problems caused by Asus' BIOS .. like here;
- Max safe voltage is 2.2V by the specs, but 2.4V or so with a little airflow is OK for 24/7.
- Corbu', you can also ask these questions in the crazypc.ro tech support section .

[s e t h]

Ati007 - maximum rated voltage is 2.3vdimm.
should be good for well over ddr1000 at 5-5-5 timings.
i think it has micron d9gmh ic's so if you really want to push it its up there with some of the best.

mine run at 5-5-5 ddr1066 2.29vdimm 24/7

[Raja@ASUS]

here's what my 3-3-3-8 667mhz 2 gig kit does quite easily, at 2.19v on the DFI Infinity, on a better board it should scale up considerably higher..

http://img83.imageshack.us/my.php?im...xscreenon7.jpg

http://img246.imageshack.us/my.php?i...ndwidthvn7.jpg

regards
Raja

[Frostyone]

Here are some results from my Team TXDD2048M800HC4DC kit. And yes they are D9GMH I removed the heatspreaders last night to take a peek at the IC's

I'm pretty stoked with the results so far. This is my first DFI board, so I'm sure there's more to be had from these once I get my head wrapped around this bios, especially with some active cooling. They'll do 1100+ 2.19v

[eva2000]

nice i just bought 4 sets of this stuff myself to play with and see as well

[Dublin_Gunner]

Frosty - 581Mhz with only 2.34Vdimm??????????

Thats a sweet OC. My Quad GT is terrible for memory overclocking

[mad_skills]

on those modules, except i have 2 X 512Mb kit:
http://www.xtremesystems.org/forums/...postcount=3910

[Frostyone]

I'm rigging up a 75mm Server CPU fan capable of 6000RPM to bolt directly on the RAM , then I'm going to see what they can do with some real voltage. 6/32 bolts right through the fan and into the heatspreaders (used a nut as a spacer of sorts to keep the fan about 1/4 from the sticks) works perfect and this fan pushes so much air both my NB and CPU idle temps went down 2-3C.

I also need to learn a little more about the sub timings and this new DFI board.

[Dublin_Gunner]

Eh, do you intend on using a CPU at all??? lol

Doesnt look like there's any space for a CPU cooler!

[Frostyone]

Eh, do you intend on using a CPU at all??? lol

Doesnt look like there's any space for a CPU cooler!

Yea, I'm watercooled and the fan actually goes on after my D-Tek Fuzion, it sits a cm above the waterblock

I've already had it installed to see if it would work, just had to rewire it as it was on a 5 pin connector.

[eva2000]

nice i just bought 4 sets of this stuff myself to play with and see as well

ah bummer, received my memory today only to have been sent the wrong model.. they sent 4 sets of the team dark series instead

Hopefully, local Aussie retailer will send me the correct models heh

[mreld3r]

They will also run at low voltage; mine do 860Mhz 4,4,4,10 at
only 2.0 volts. Live long and prosper..they run really cool at 2VoltZ. This ram is the best!

[Frostyone]

These just continue to impress me to no end!

1126 5-5-4-9 2.18v 8m pi stable testing 32m now.

[ZOMGVTEK]

WHOA thats a hella overclock for 800mhz ram.

[sammurai]

536mhz@4-4-3-3-1 with 2,45v in BIOS

But i can`t get 1200mhz with 4-4-4-x not even with 2,6v. Only 1200mhz with 2,6v and raport 333/1066 .
I don`t know if the ram is bad or mobo.