Asus P5WD DH @500fsb 32M TT BT chipset cooler

[Rol-Co]

I dunno if somebody already done it but to gain higher fsb i build a Thermaltake Big Typhoon cpu cooler on the chipset

Asus P5WD DH Deluxe v modded
Intel E6600 es Mach II cooled
Thermaltake Big Typhoon chipset cooler
Ram sink's on the mosfets
corsair xms2 8000UL
WD Raptor 36gb hdd

cpu temp -21c (doesn't measure further)
chipset temp 30c at bios
chipset vmch 2.04 v

original cooler was given problems at high load, the TTBT is doing a lot better

the pic of the big typhoon on it


1M multi 7


1M multi 8


8M@500fsb


32M@500fsb



if somebody got more extreme cooling on their chipset feel free to post.

[Verisimilitude]

mother of

thats incredible

[sierra_bound]

Nice work, Rol-Co. That's the biggest chipset cooler I've ever seen.

I noticed you were running memory at 5-5-5 with 4:3 ratio. Can you get the timings any tighter?

[bigjohns97]

2ghz fsb = teh new hawtness

[vengance_01]

Watercooling anyone? We might be seeing where better NB cooling may yeild to better results.

[sierra_bound]

Watercooling the chipset generally yields about 6-7 more MHz on FSB with P5W DH. Not huge. More importantly, Rol-Co is using modded board with Vmch at more than 2v. Unmodded board only goes up to 1.65v.

[AndrewZorn]

How much did the BT increase your max FSB vs the stocker?

2.Xv instead of 1.65v also increases max FSB how much?

I'm going to have a similar setup, except I want the system to be 24/7 useable and I do not want to use mega voltage.

[Danger30Q]

I guess if you are going to do the vmch mod for higher FSB, this Big Typhoon, water cooling, or something better than the stock passive heatsink may do the trick to prolong the life of this board.

[n00b 0f l337]

Looks like I'll be cooling my NB with a TEC or something

[theteamaqua]

omg !! i use TTBT to cool cpu lol wow ur insane man. whats next? tunic tower 120 for chipset ?lol

[caligula]

SICK. That's sick Congrats!

[Rol-Co]

@sierra
thank's ......isn't he nice it fit's on the milimeter
i'm running @5-5-5 becouse the memory can't go that high on the 4:3 divider, verry strange imo
1:1 i've tried and stops @ 482 , both 2.65v
so something weird is going on on the asus with divider 4:3

Maybe gonna try a waterchiller too, got one here (-10) with swiftech chipset cooler

@vengance_01
seen phase chipset cooling somewhere in the topics

@andrewzorn
the tt bt increases the fsb from 504 max load 1m til 520 1m vs stock cooling, most increase is @ load, the ttbt is a good cooler for heavy load, it amaized me too
2.04 increases fsb from 454 (1.65v) til 504 @ stock cooler and 520@ ttbt

this is not for 24/7 , becouse the use of a pci-e graphic's card isn't possible annymore above 1.90 v
1.75-1.78 (max 480fsb) is ok for 24/7 use with good cooling.

[Plaicd]

Unmodded board only goes up to 1.65v.

Is that limit because of the boards design or because of the bios?

[sierra_bound]

Maximum chipset voltage in BIOS is 1.65v. Everyone who's done 500+ FSB has done Vmch mod. Hehe, now Rol-Co is going to remind me to do mod on my board.

@Rol-Co
With 4:3 ratio, I was able to run 3-2-2 timings (Corsair 8000UL) with FSB at 465. Maybe I'll try loosening timings to see what happens.

[Nazu]

Holy crap That's one BIG nb cooler

[[XC] DragonOrta]

Absolute_0 was trying watercooling the chipset, but found it quite difficult, because of the crappy clip mounting. The waterblock had trouble keeping a good mount.

[n00b 0f l337]

Thats why you want to instead locate the two closest holes to the NB in the mobo that are not for cpu mounting, and use them for mounting.

[giorgioprimo]

May you show the max possible in 1:1?

Thanks

[Rol-Co]

Thats why you want to instead locate the two closest holes to the NB in the mobo that are not for cpu mounting, and use them for mounting.

the closest mounting holes are on the edge of the board, more there isn't
only the two clips

but with 2 hooks it is possible

the ttbt is standing on 4 pieces of sealstring prevent from falling over.

@sierra
got same thing here, 3-2-2 timings is possible @450-470 fsb but not faster in pi as 4-3-3, losen the timings this time to 5-5-5 to be sure i got no probs with the memory

[Gun_Strife]

thats sick but with this u have to use pci gpu

[Rol-Co]

May you show the max possible in 1:1?

Thanks

Max 1:1 ,.......doesn't matter what voltage on the mem , if its obove 2.50 its ok

[Rol-Co]

thats sick but with this u have to use pci gpu

or you keep the voltage below 1.85v and pop in a pci-e

[PcCI2iminal]

congrats for the insane fsb and xtreme cooling!!!

if somebody got more extreme cooling on their chipset feel free to post

its not xtreme but its works very well



stock HS


CM Blue Ice

[Fabius88]

I've a question..how can you use these cooler with the orrible retention clips of asus' chipsets?can you post an image of the clip you used?
thnk you very very much

[grimREEFER]

this is probably gonna be viewed as a puss question, but do any conroe boards have fsb to ram ratios taht are less than 1:1...?