Second in the world under 10 sek superpi, so close byt yet so far away

[SoF]

hell the second time today I see >5200MHZ conroe
simply awesome

gl for your next runs

[guess2098]

good job :UP:
try 5.3G

[Stoolman]

Getting closer now.. but boy.. this is hard as f**k...
I am so on the edge of what my chip is capable of that it is not even funny.
Asus Bios 0604, doesn't seem to appreciate my Corsair 5400UL fatbody modules, so I'll try flashing back to 0602 tomorrow.. maybe that will give me what i need.... Really beginning to respect Coolalers record now...
Can not get the Asus board to do a decent 4:5 divider... So it is 1:1 still.... but somewhat higher clock.. I think the clock on the second run 405*13=4265Mhz is a WR... but I am not quite sure...
Run 1


And run 2

[[XC] moddolicous]

You know what should help you get a faster time?? The XS OS! Is your install tweaked?? Anyways, great results. Cant wait for your 3d runs. What card will you use?

[VictorWang]

9.781sec that's cool ! very close to coolaler's WR=9.719sec.

I bet you set ram:fsb=4:5, 4-4-3-4-2 hp3=auto
and do some OS tweak will help to achieve 9.6sec

[mike]

Getting closer now.. but boy.. this is hard as f**k...
I am so on the edge of what my chip is capable of that it is not even funny.
Asus Bios 0604, doesn't seem to appreciate my Corsair 5400UL fatbody modules, so I'll try flashing back to 0602 tomorrow.. maybe that will give me what i need.... Really beginning to respect Coolalers record now...
Can not get the Asus board to do a decent 4:5 divider... So it is 1:1 still.... but somewhat higher clock.. I think the clock on the second run 405*13=4265Mhz is a WR... but I am not quite sure...
Run 1


And run 2

AWESOME!

[***Deimos***]

And here I was imagining that Coolaler was the lucky winner of the best Conroe chip from all the hundred and maybe even thousands of pre-production chips, hand picked by the almighty Gordon Moore himself.

BTW: Silly question, but how hot is it at those clocks? Do you need to constantly pour bucketloads of LN2? Do you think there is hope for dry ice to come close?

[spin 9]

Excellent

[coolaler]

great job

[Stoolman]

OS has been un-twaked until now... going at it tonight again... new bios and with tweaks..

[nachthymnen]

OS has been un-twaked until now... going at it tonight again... new bios and with tweaks..

Go for 9,6
Amazing results

[SIOUX]

Nice work Stoolman what was the vdimm on the g.skill HZ for 400 3-3-3 ??

[Garrett]

great job

Stoolman will break the record, are you just going to sit there and do nothing about it?

This battle is far from over I guess

Anyway, good luck to both of you, Stoolman and coolaler :thumbsup:

[Stoolman]

Nice work Stoolman what was the vdimm on the g.skill HZ for 400 3-3-3 ??

2,5V, more volt just produced mem errors for some reason..

[coolaler]

Stoolman will break the record, are you just going to sit there and do nothing about it?

This battle is far from over I guess

Anyway, good luck to both of you, Stoolman and coolaler :thumbsup:

THX Garrett,noone can NO1 forever,I just do my best

[SoF]

if this os was untweaked we may see a new WR on your next runs - great job!