MMM
Results 1 to 5 of 5

Thread: when i use dividers, i have to increase vdimm for same ramsettings

  1. 04-23-2006, 04:00 AM #1
    Hirogen
    Hirogen is offline
    Registered User
    Join Date
    Jun 2005
    Posts
    25

    when i use dividers, i have to increase vdimm for same ramsettings

    hi,

    i have a problem with my dividers/bios/memcontroller perhaps.


    my 2x512mb twinmos bh-5 old doing @3,3vdimm 263mhz stable 1:1, testet with prime, super pi 32m, goldmemory on my dfi nf4 and my san diego 3700.


    but when i use the 166 divider like 310mhz x 10@166 and my rams are at same settings/ stressed in the same way, goldmemory find some errors, caused of the rams, because increasing the vdimm improving my overclocking.



    the difference is perhaps is 8 to 10 mhz, thats awful !


    some suggestions, please.


    are there divider-friendly ramsattings, bios other trick?


    H.
    Reply With Quote Reply With Quote
  2. 04-23-2006, 04:18 AM #2
    K404
    K404 is offline
    Wanna look under my kilt?
    Join Date
    Jun 2005
    Location
    Glasgow-ish U.K.
    Posts
    4,396
    How are your sub-timings? if you set them in BIOS, some may make the RAM unstable. I keep mine set to auto, them play with them in A64 Tweaker if I need to.

    Hope this is useful somehow

    Kenny
    Quote Originally Posted by T_M View Post
    Not sure i totally follow anything you said, but regardless of that you helped me come up with a very good idea....
    Quote Originally Posted by soundood View Post
    you sigged that?

    why?
    ______

    Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
    Reply With Quote Reply With Quote
  3. 04-23-2006, 10:00 AM #3
    Hirogen
    Hirogen is offline
    Registered User
    Join Date
    Jun 2005
    Posts
    25
    Quote Originally Posted by K404
    How are your sub-timings? if you set them in BIOS, some may make the RAM unstable. I keep mine set to auto, them play with them in A64 Tweaker if I need to.

    Hope this is useful somehow

    Kenny
    i have tested every subtiming step by step with goldmemory for the best result, but i can compare it with your suggestion.


    H.
    Reply With Quote Reply With Quote
  4. 05-03-2006, 03:16 AM #4
    Hirogen
    Hirogen is offline
    Registered User
    Join Date
    Jun 2005
    Posts
    25
    i found the problem, my memcontroller is incompatible with trp2 and my divider/multi combination.

    so i put trp to 3 and everything seems okay...


    H.
    Reply With Quote Reply With Quote
  5. 05-03-2006, 04:11 AM #5
    ahmad
    ahmad is offline
    Muslim Overclocker
    Join Date
    May 2005
    Location
    Canada
    Posts
    2,786
    Send a message via MSN to ahmad
    When HTT goes up, so must Max Async Latency. We made a thread about this sometime back. Very interesting it was.

    My watercooling experience

    Water
    Scythe Gentle Typhoons 120mm 1850RPM
    Thermochill PA120.3 Radiator
    Enzotech Sapphire Rev.A CPU Block
    Laing DDC 3.2
    XSPC Dual Pump Reservoir
    Primochill Pro LRT Red 1/2"
    Bitspower fittings + water temp sensor

    Rig
    E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB


    I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.

    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules