NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!

[szukalski]

Some results from my Gskill FC, came with 0519 TCCD (no more heatspreaders heh).

These sticks like voltage, best performance is at 2.9v, and they work best with 2.5-4-4.
2.5-3-3 tops out around 275MHz, 2.5-4-3 tops out around 285MHz, but I have gotten up to 305MHz on 2.5-4-4-X.

300MHz @ 2.5-4-4-7 @ 2.90v = 26m39


305MHz @ 2.5-4-4-7 @ 2.93v = 26m46


A 30MHz overclock from rated.

[Delly]

new personal record with GeiL OneS TCCD@321MHz 2.5-3-3-6 vdimm 3v

[tansel]

geıll one s 2.5-3-3-5 ddr 620 wıth 2.8 v dımm

[tansel]

my new scor 2.5-3-3-3-6 1t ddr 624

[uOpt]

I temporarily have a Windows installation on my DFI board, so here it goes.

Geil One TCCD 2x 256 (single-sided), 2.8 V, on my Optyeron CABYE 0540FPAW (my CABNE seems to have a better memory controller, but is on vacation).

Pi 1 M stable:



Pi 32 M stable:

[eva2000]

i'll add mine

2x 512MB Patriot PC3200XBL TCCD
@306mhz 2.5-4-3-6 at 2.69v vdimm
DFI NF4 Ultra-D R.AD0 704-2BTA bios

[Kenetixx]

Ill Add mine while im here

Centon Advanced 3200LL Stock 2-2-2-5 2.6 volts
Running at:
300Mhz 2.5-4-3-6 32meg Super Pi stable 2.66 volts

[Matrox]

AMD Manchester 3800+
300 x 8 =2400
DFI Lanparty nF4 Ultra D @SLI
Bios 704-2BTA
GeIL Xtreme DDR600 2.5-3-3-5 2.7v week 0525/0519
http://valid.x86-secret.com/show_oc.php?id=52140

[Kenetixx]

AN update On my Centon 3200 LL , Not to shabby for ram thats rated at 200mhz

Just tightening things up a bit :

[AndreYang]

New WR

GeIL One TCCD PC4800 ES

MB: DFI NF4 SLI-DR BIOS 510-1
CPU: Opteron 146 @ 321*9
Ram: GeIL One TCCD DDR600 ES

DDR642 2.5-3-3-6 1T 512MB*2

2x512MB

TRCD=3



Start 3 Loop



7 Loop



10 Loop



13 Loop



17 Loop



19 Loop



22 Loop



24 Loop



Finish








CPUZ

[bachus_anonym]

*** Thread updated ***

Congratulations to AndreYang on a new WR @ 321MHz 6-3-3-2.5-1T

From now on, there is a new requirement added due to more high-clock results with TRCD=3:

Update Nov 25th, 2005: Any new entry above 315MHz x-3-3-2.5-1T is now ***required*** to be accompanied by at least 8 photos taken at various stages of SPi32M run. AndreYang's 321Mhz WR result is a PERFECT example of how it should be documented.

Thank You again for participation and don't stop pushing those RAMs! Looking forward to new entries

[by -=Merlin=-]

hi bachus_anonym

OCZ 3200 Plat. rev2 v1.0 Tccd 2x512Mb









Merlin

[A64FX]

message for bachus_anonym:

ciao a tutti da Bologna - Italia (hi to all from Bologna - Italy)
...this is my best score...

DFI NF4 Ultra-D bios FX60test2
A64 venice 3200+ @323x7 vcore 104%
2x512mb Gskill 4400LE@323mhz 2.5 4 5 3/2.9v slot orange dual channel

[A64FX]

regards from the italy
this is my new record in the trcd4 with my gskills 4400le to 326mhz 1T 2.5 4 8 4 - 3.0v SPI 32mb stable

[The_NamelessOne]

Hi guys.....new first place in Trcd=4...same frequency of A64FX but better timings

[A64FX]

oilÃ:banana: boy's...
he anchors regards from the italy
this is my new record in the trcd4 with my gskills 4400le to 327mhz 1T 2.5 4 8 4 - 3.0v SPI 32mb stable...

[A64FX]

hi...

[The_NamelessOne]

this maybe new WR in tRcd=4..

[IMG][/IMG]

[BioPC]

New personal and world record on TCC5

OCZ PC3200 Platinum Rev2 [v1.1 TCC5] @ 322.4Mhz 2,5-4-3-7 2.91v
Some tight settings and x9 multi
Tested on opteron 146 0540FPBW @ 2,9Ghz
Bios 623-3 official

Lol, check out temps, room was almost as cold as outside.


I've been quick testing the memories at 3,0v and with some luck they could pass 325Mhz.
Will post as soon as i have more time for testing.

BioPC

[Dihon]

Maybe this one seems modest for most of you.
But for me it's quite satisfying.
Corsair XLPT & DFI NF3Ultra 250 GB + A64

[dogsx2]

Here's some FX I got from Perc.

[dogsx2]

Seen eva2000 run these settings at 3105 with an opty and wanted to see if these FX could do it also. They could but the time is a lot slower then eva's as I didn't turn off anything, just ran it.

[bachus_anonym]

I just wanted to remind and ask all of you at the same time to post here ONLY with results, please. All other posts will be removed... I really want to keep this thread as up-to-the-point as possible. Thank You!

[slimais]

My 2Gb test (4x512)

slimais - 270x10 @ 8-3-4-2.5-2T - DFI Ultra-D (NF4 Ultra) - A64 Venice 3200+ - 4x512 OCZ Platinum 3200

[The_NamelessOne]

new absolute WR in trcd=4