Best 1M on air?

[sang]

Thats a preaty good score.........

This weekend I'll put it under a prommie and I'll tell you how it does.......This VGA has done under a prommie Core= 785MHz and Rams=702MHz.......I think under a cascade(prepairing now) will do about Core=850MHz+ and Rams= 710MHz+.......

EDIT: LL NEEDS high overclocked VGA's.........LH doesn't......

Yes,it was a typo for LH.this is the main test which im interested for. thanks.
Im waiting your results.Your XTPE looks like a killer

[bUDE]

Freq is here http://valid.x86-secret.com/show_oc?id=43995

Cooler is TT Sonic Tower with Papst 120mm@700 rpm

[RoyaL]

hipro5 impressive numbers,i'm deeply impressed!
you beat memesama!


ciao kiko!

i also agree with Hipro5 that maxmem is no good for dothans and i don't know why but i always get better results with XP SP2 that Server 2k3..

somebody made some tests with SP1 for 2k3?

[RoyaL]

I think your chances to run >240 FSB 2x512 UTT in a C800 are close to zero,but we never know until you try it.

http://img187.echo.cx/img187/7383/utt2509pw.jpg
http://img236.echo.cx/img236/5786/snap2606dg.jpg

Mtec UTT on 875..
it's true that with dothan is more difficult that P4 but u can never know.

Hipro got insane rams , best bh6 I ever seen in my hole dirty life
btw what cooling do you use for the memory? voltage?

[hipro5]

I use these heatsinks...........



........and above them, there is the ABIT AN8 Fatality's Ram cooler with 2 x 4 x 4 DELTA fans @ 10000 rpms to cool them......Vdimm for maxing out on 875 chipset, is 3.63Volts......

WinXP SP2 here too......

[mrlobber]

Here is my best on air so far:
Asus P4GD1 unmodded / Dothan 740 @ 1.52 Vcore /2x512 Mushkin Redline & DDR Booster @ 3.4 Vdimm



CPU limited because these Redlines can complete Superpi at least at 267 mhz.

[sang]

hehe,a same 2820MHz on P4GD1,730 dottie with cold air.

[sang]

http://img187.echo.cx/img187/7383/utt2509pw.jpg
http://img236.echo.cx/img236/5786/snap2606dg.jpg

Mtec UTT on 875..
it's true that with dothan is more difficult that P4 but u can never know.

Hipro got insane rams , best bh6 I ever seen in my hole dirty life
btw what cooling do you use for the memory? voltage?

Royal - I think these are the first 512MB sticks UTT based memory who run over 240 in a C800.Impresive! Tried myself few 512 Winbond UTT(Twinmos) in a P4P800-SE and never make it over 225.But in GD1 they were flying at 250.

I really have to dig out a C800 to play ..

[mrlobber]

hehe,a same 2820MHz on P4GD1,730 dottie with cold air.

No, 6 Mhz extra actually

Would 25 fsb be worth the 0.5 sec difference or have you done some special tweaks?

[sang]

dunno,never tried with 11 multi.
just known normal pi tweaks

[sky]

my little 760 with the stock asus ct-479 heatsink & fan

cpu: pentium m 760 @ 311x9.0 @ 1.60v (bios) not modded yet
ram: 2x512 mb khx 3200 (bh5) @ 5:4 249-5-2-2-2, vdimm @ ~3.25v (real)
mob: asus p4p800-se with bios .003 and asus ct-479
gpu: either my pov 6800gt or my sapphire 9800xt (rip now)
psu: ocz 520w powerstream

pat: partially enabled (boot at 240x10.0)

[hipro5]

Hipro5

I think your chances to run >240 FSB 2x512 UTT in a C800 are close to zero,but we never know until you try it.
I really would like to see a 3D2001 run in a C800 with your CPU over 3100MHz (it will be perfect @3200MHz) and with your x800 XTPE.Clocks for Radeon doesnt matter so much, i just want to compare your CH,LL with my run on P4GD1.
Here is mine:
http://service.futuremark.com/compare?2k1=8756918

Thanks.

I puted my DOTHAN 770 on my hi-pro-mie(R410 gas) and benched @ 3205MHz......Rams at 267MHz 1:1.....NOT my good mobo though......This mobo is my other P4C800E-Deluxe......
ALSO VGA @ 634 Core and 641 Rams........VGA on AIR.....



C O M P A R E URL.......

[RoyaL]

I use these heatsinks...........

http://www.thelab.gr/images/Hipro5/Memory/Modd_39.jpg

........and above them, there is the ABIT AN8 Fatality's Ram cooler with 2 x 4 x 4 DELTA fans @ 10000 rpms to cool them......Vdimm for maxing out on 875 chipset, is 3.63Volts......

WinXP SP2 here too......

great! i bet it's homemade by you! Great modder for real
what's the temp of ram when u bench'em?

Royal - I think these are the first 512MB sticks UTT based memory who run over 240 in a C800.Impresive! Tried myself few 512 Winbond UTT(Twinmos) in a P4P800-SE and never make it over 225.But in GD1 they were flying at 250.

like i said,you can never know. anyway with dothan it's quite impossible to get that mhz with UTTs..P4 it's a different story,even the bios don't helps too much

[hipro5]

Rams where at room temperature cooled by forced air(DELTA Fan 12 x 12 cm 200cfm)....

[Elisha]

730 cooled by Zalman 7700CU.

Hipro do you have pics of how you mounted the prommie on the ct-479?

[sang]

I puted my DOTHAN 770 on my hi-pro-mie(R410 gas) and benched @ 3205MHz......Rams at 267MHz 1:1.....NOT my good mobo though......This mobo is my other P4C800E-Deluxe......
ALSO VGA @ 634 Core and 641 Rams........VGA on AIR.....



C O M P A R E URL.......

Thanks,Hipro5. Excellent work.

Very usefull compare between P4GD1 and P4C800.
Looks pretty close.I cant belive the only difference in LH its 1 FPS.
From what have I notice so far benching with AGP mobos - raising AGP frequency helps for DL,DH,N in 3D2001. BUt it also lower your score on the non-GPU dependant tests. I presume you were running full PAT,right?
In this case you cant lower AGP freq. between tests.

I used MPS Uniprocessor tweak for my 2k1 run. Have you? Or the ACPI tweak?

[hipro5]

NO full PAT involved........Boot @ 240MHz and into windows raised the fsb up to 267MHz......On this mobo, when I put in 865 Tweaker the 111(11) config for full PAT, it lets me bench on air @ 253MHz and on phase change @ 258MHz max........My other mobo lets me play full PAT on air @ 262MHz and on phase change(haven't tested it yet) should be around 267MHz+(I hope )......ACPI Multiprossesor run....

267MHz and 101(10) on tweaker = 245 - 248MHz with 111(11).........

Tommorow I'll test at the same frequency and full PAT to see how it does compare to this run....

[hipro5]

Hipro do you have pics of how you mounted the prommie on the ct-479?

[Elisha]

are those custom brackets?
and did you solder the power pins and the fsb jumpers?

[hipro5]

Yes........
......and yes.......

[freecableguy]

I have a FX57 that does 3.2Ghz on air with a sub 25 sec 1m SPI.

[Gautam]

First class work again Hipro.

Any chances of a 780 in your future?

MPS Uni should score higher than ACPI multi on a Dothan, but not by a significant amount.

[hipro5]

First class work again Hipro.

Any chances of a 780 in your future?

Soon........very soon......

[sang]

very ingenious way to pass the anoying ct-479 .I would really love to see some close-ups with your mounting prommy.In the "http://www.thelab.gr/images/Hipro5/DOTHAN" folder i cant find one.

Kudos for your work,my friend !

[Gorod]