TEAMGROUP 2x1GB 2.3.2.5 Infineon IC

[gigi77]

2x1GB pc3200 2-3-2-5 2.6v Infineon IC

[gigi77]

System Configuration

Fx57 (molti locked at 11x)
Dfi nf4 sli-dr bios 623-3
Sapphire X800GTO 2 no mod pipe@ 520/560
Windows Xp Sp2




Settings all Motherboards DFI for BEST PERFOMANCES with this ram

CPC = Enabled
CAS Latency(CL) = 3 (over 250mhz)
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 13
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3682
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 7
DRAM Data Drive Strength = 3
Max Async Latency = 7ns
Read Preamble Time = 5ns
Dram time = Fast
Idle Cycle Limit =256
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)

[gigi77]

IC by Cpu-Z 1.31

[gigi77]

235 2.3.2.5









250mhz 3.3.2.5

[gigi77]

260 3.3.2.5






Memtest Pass

[gigi77]

WORK RANGE for this kit is 2.6v ed 2.9v.
I have best perfomances at 2.8v-2.85v


3d bench have problems over 255mhz fsb, images is corrupt.

[high5]

very, very nice
what's the price?

(unintentional rhyme )

btw, this memory definitely has the looks, even when your remove the H/S.

[gigi77]

i run spi 1mb at 268-269mhz 3.3.2.x!

[high5]

no 3D action @260MHz?

btw gigi, price/availability?

[gigi77]

For High5 all brand with this IC have problems to play 3d over 260mhz....

[bachus_anonym]

Is that screen corruption I'm seeing on 260-261MHz screens, Luigi? Very typical for Infineon pushed a bit too far...

Looks like we have 2GB kits popping out from everywhere DDR500 3D is still very nice. Now we need to know where, when and how much

[Onepagebook]

nice work gigi..
But..you should be capable for doing this

[high5]

For High5 all brand with this IC have problems to play 3d over 260mhz....

but i asked for 260MHz, and there are some doing 3D fine @260. is it wrong to ask?

and the other question which i asked twice, you didn't answer. if you don't know is it so difficult to say that you don't know?

[Onepagebook]

but i asked for 260MHz, and there are some doing 3D fine @260. is it wrong to ask?

and the other question which i asked twice, you didn't answer. if you don't know is it so difficult to say that you don't know?

buddy, let me go shopping and grab 6600 or gt I can show 260+ with 3d action no prob at all. or Bachus will kill me for sure

[JNav89GT]

lol
OPB, I need you to msn me
I lost your info

[eva2000]

Is that screen corruption I'm seeing on 260-261MHz screens, Luigi? Very typical for Infineon pushed a bit too far...

Looks like we have 2GB kits popping out from everywhere DDR500 3D is still very nice. Now we need to know where, when and how much

anyone figure out why infineon can do max superpi 32m higher than max 3d clocks ? there's around 2-4mhz difference between the 2 maxes

[gigi77]

nice work gigi..
But..you should be capable for doing this

nice Kevin