Results 1 to 25 of 25

Thread: First trial of Gulftown with QUAD CF HD4890 & my New PSU ANTEC Quattro 1200W OC

  1. #1
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884

    First trial of Gulftown with QUAD CF HD4890 & my New PSU ANTEC Quattro 1200W OC

    It is my first time to use E762 to test on LN2. So, the result may not be very fast! Still need tuned!!

    Like a setup...




    Test Platform:

    CPU: Gulftown 2.4G ES
    MB: EVGA Classified 4XSLI E762
    Display Card: 4 X HD4890
    RAM: Corsair 2000GT C7 2G X3
    PSU: Antec Quattro OC Edition 1200W

    Yes, I used this new baby to test Gulftown with 4X4890





    5.8GHz 3D06 passed, just a quick run!



    Quick SPI 1M 6.937s, break 7s, so stop, let me to play next time!



    6419.5MHz CPUZ Validation:





    WR of 2.4GHz Gulftown!?

    Dewar is empty...........
    Last edited by TinTin; 11-20-2009 at 09:26 AM.
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


  2. #2
    D-m.o.s.t
    Join Date
    Jul 2005
    Location
    The Netherlands
    Posts
    942
    Strange validation , version 1.01 ?? , and how many voltage to reach this?

    put up the uncore , everything is kinda slow for the clockspeed.

  3. #3
    Xtreme Member
    Join Date
    Jul 2009
    Location
    Germany _ Frankfurt
    Posts
    395
    very nice score, and very nice board
    www.vitesse24.de
    www.vitesse24.de


    C2Q q6600 3.3GHZ @ 1,184V
    4,5GHZ@ 1,52V ( 9* 500 )




    Corsair Dominator 10000 2gb, 8888 2gb, 9136 1gb

  4. #4
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Quote Originally Posted by Rol-Co View Post
    Strange validation , version 1.01 ?? , and how many voltage to reach this?

    put up the uncore , everything is kinda slow for the clockspeed.
    Yes Yes...since it is the 1st time to deal with two new things, i9 and E762. So i want to have a initial concept for Gulftown and my MB. Sure will bump them up on the real run...

    validation is using EVGA's Eleet....so like this..!
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


  5. #5
    Xtreme Enthusiast
    Join Date
    Jul 2003
    Location
    Sweden
    Posts
    706
    nice setup and imagine 2 x HD 5970 or 2 of Nvidia GT 300 Fermi cards with that beast Amazing. but Vcore woot so hard ohhh...
    [Core i7 4820K Ivy Bridge-E @4,7Ghz Vcore 1.28v][Asus Rampage Iv Extreme bios 4403][16Gb G-skill Ocz 2133mhz DDR3][Lian Li Pc2120 B, black Case][480Gb OCZ SSD main disk+120Gb ssd game disc][EVGA GTX Titan@900mhz Oc luft ][Os Windows 7][Telia 1000/250Mbits fiber ][24,4TB Lagring] upcoming Intel Haswell-E 8 cores/16 Threads next year Q4 2014 ?

  6. #6
    Xtreme Addict
    Join Date
    Jul 2007
    Location
    ARIZONA
    Posts
    1,564
    Exellent ! benching TinTin nice you leave more room for more WR

    Gulftown WR small club lol
    [SIGPIC][/SIGPIC]
    PENT E8400 batch #814A014 ...4.3 at 1.34v~4.7 at 1.45v
    FOXCONN MARS
    COOLIT Eliminator 7*c idle~27~38*c load $95bucks !
    BUFFALO FireStix's ddr2-800 do 1200 eazy at 2.1v
    OCZ 2x2 kit pc2 8500 - 1066 @1069 atm
    Quattro 1000W
    Radeon 2-4850's in crossfire
    OCZ Vertex SSD thanks Tony!
    ALL PIPED INTO HOUSE AIRCOND ;}
    *QUANTUM FORCE* saaya & sham rocks !
    *REAL TEMP*
    At least you've got some Xtreme software now for working in Xtreme situations! "Unclewebb" rocks !
    *MEMSET* Felix rocks !
    *SUPER TEC MAN* UncleJimbo rocks !
    OVERCLOCKERS MAG..http://www.xtremesystems.org/forums/...d.php?t=197660

  7. #7
    Diablo 3! Who's Excited?
    Join Date
    May 2005
    Location
    Boulder, Colorado
    Posts
    9,412
    Impressive for "only" HD 4890 quad-CF Insane vcore also!

  8. #8
    Registered User
    Join Date
    Apr 2008
    Location
    Sweden
    Posts
    93
    Skills all the way, congrats

  9. #9
    Champion
    Join Date
    May 2006
    Location
    Bangkok, Thailand
    Posts
    1,375
    Huh that Vcore is really rock ! but nice to all amazing results TinTin
    Sorry For My English
    OverclockZone Team
    THAILAND

  10. #10
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    what batch is that CPU?

    All along the watchtower the watchmen watch the eternal return.

  11. #11
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Some peoples asked me in PM about the difference between the ANTEC PSU OC edtion and normal edtion:

    SO, I explain here:


    Standard: 8 PCI-e connectors (Standard: 4 x 6+2pin, 4x 6pin ), No Fan controller and NO 12V knob
    OC Edition: 12 PCI-e connectiors (OC Edition: 6x 6+2pin , 6 x 4pin) Fan Controller + 12V knob

    except this, the design and content of PSU is all the same
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


  12. #12
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Thx all!!!

    Because yesterday I was too hurry to test it on LN2...so all voltages is just set, not fine tuned. Hoping that I can run 5.9~6.0G 3D06.........and better score. The above score is very low...HAHA

    I will test it again next week, have to fill my DEWAR...!
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


  13. #13
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Quote Originally Posted by STEvil View Post
    what batch is that CPU?
    Q3FE - C927XXXX
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


  14. #14
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Very nice results there - nearly 40k 3dmark06
    ---

  15. #15
    I am Xtreme
    Join Date
    Dec 2008
    Location
    France
    Posts
    9,060
    Another 6.4GHz result, looks like some sort of cap for these chips...
    Great results, though!
    Donate to XS forums
    Quote Originally Posted by jayhall0315 View Post
    If you are really extreme, you never let informed facts or the scientific method hold you back from your journey to the wrong answer.

  16. #16
    Moderator
    Join Date
    Nov 2006
    Posts
    2,609
    Good start with monster
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  17. #17
    Banned
    Join Date
    Dec 2007
    Location
    Croatia
    Posts
    750
    Another Gulftown action. Nice to see that monster cpu's over 6GHz. Looking forward to better and (performance) improved results

  18. #18
    Xtreme Member
    Join Date
    Aug 2004
    Posts
    416
    Great results my friend - as always /

    Now get those 5870's some Cold and shoot 3D06 andbreak the 40K !!!
    i7 920, HD4870X2
    Corsair 6GB 1800MHZ
    GigaByte X58 Xtreme,
    *************************

  19. #19
    Xtreme Enthusiast
    Join Date
    May 2009
    Location
    Somewhere near Amsterdam, Netherlands
    Posts
    530
    liked the E762? anyone having a 762 experienced low coldboot problems? or did they fix that

  20. #20
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,823
    OMG....great chip
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  21. #21
    Registered User
    Join Date
    Aug 2008
    Posts
    28
    WOW!!
    monster break record...nice work bro...

  22. #22
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Nice work TinTin...this from Andre?
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  23. #23
    -_-
    Join Date
    Sep 2006
    Location
    ATLanta, Ga.
    Posts
    516
    nope that is not from Andre....
    Quote Originally Posted by Gautam View Post
    I'll add my name to this elpida graveyard as soon I even think about running 32M. (yes, the thought is enough)



  24. #24
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Quote Originally Posted by thijs View Post
    liked the E762? anyone having a 762 experienced low coldboot problems? or did they fix that
    I can cold boot it at around -120C with this gulftown.
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


  25. #25
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •