G.E.I.L. ONE S The Day of Thunder

[ianocean]

Nice memory Gigi-there is my answer with Geil TCCD
DDR 612 2.5-3-3-7 1T

[szukalski]

Here's my first results with some Geil One S.
DDR600 @ 2.5-3-3-5 @ 2.7v
IanOcean, how come you get a faster Pi32M time than I when I'm running at 2.7GHz, is it to do with the 1.4mod on Super Pi?
These sticks have more in them I believe, just need more time for testing.

[Bamboo]

Your SUper 32M is way to slow. Set the to 100Mhz 1.95us; DQS Skew Mode to OFF, and DQS Skew to 0.

[szukalski]

Thanks for the help Bamboo, it's hard to fully test when you have limited time on your hands. It's the great guys here that really make my days.

[ianocean]

My new Venice E6 is maxing at 2.5Ghz

[|SiLA|]

Nice memory Gigi-there is my answer with Geil TCCD
DDR 612 2.5-3-3-7 1T

nice but the alpha timings are too "relaxed"

anyway how many vdimm?

[ianocean]

2.7v no more.These TCCD's over DDR580 are true hot-i'm using Delta 80mm high power case fan to cool them

[|SiLA|]

2.7v no more.These TCCD's over DDR580 are true hot-i'm using Delta 80mm high power case fan to cool them

try 2,8 i've been using vitesta's TCCD 24/7 @ 2,9

it's normale 2,5~2,95

[ianocean]

I will fight for 308-310Mhz this weekend

[x3ro]

Good luck with it ian. For the testing of those chips im doubting between a 3500 or 3000+ venice.. What would you guys reccommend?

Regards

[ncsa]

Good luck with it ian. For the testing of those chips im doubting between a 3500 or 3000+ venice.. What would you guys reccommend?

Regards

I would steer away from the Venice and get an SD core.. the E3/6 seem to be very touchy when running high FSBs with a matching or divider to maintain the memory at DDR600+....

[x3ro]

what cpu would you reccomend me them with sd core??

Regards

[Sesto Sento]

a 3700+ sandy

[Dandrake]

Hi Guys! (We Gigi...anche tu quì... )

Does anybody knows how to reach 300Mhz RS with a pair of GeIL Ultra-X TCCD 2x512Mb?

I can't go over 295Mhz with the following timings and Dfi Lanparty Ultra-D Nf4+venice 3200:

Vdimm 2,8V (with 2,7V i can't pass SuperPi32 M)

enabled
2.5
4
5
3
7
14
3
2
1
2
3210
1
enabled

auto
0
lev8
auto
8ns
5ns (5.5ns on A64Tweaker)
normal
256
enabled
16x
7x
disable

With 2.5-3-3-x i can't go over 265Mhz! Is it normal??

I'm using yellow slots...but i can't go over 295Mhz with orange slots too.

Sorry for my poor english.

[szukalski]

@Dandrake
Try this, works for my Ultra-X :
enabled
2.5
4
8
3
12
14
2
2
1
2
3072
1
enabled

inc
255
lev7
lev2
9ns
5ns (5.5ns on A64Tweaker)
normal
256
disabled
16x
7x
disable

[targ]

try this Dandrake:

enabled
2.5
4*
7*
4*
12
14
2
2
1
4*
3072*
1
enabled

inc
0*
lev8
lev1*
8ns
5ns (5.5ns on A64Tweaker)
normal
256
disabled
16x
7x
disable

* is the ones ive changed. thats what i use on my One up to 330Mhz so should get you to 300Mhz then you can tighten timings.

targ

[|SiLA|]

here's my GeIL One S in action

[targ]

impressive stuff mate.

glad to see you are getting good results.

targ

[gigi77]

nice results sila

[longsiew]

Hi! This is my GeIL ONE TCCD

loose timing at 3-4-4-8 at 2.85vdimm at 1T at DDR660(330Mhz) with Super Pi 1 million.

OT: My GeIL ONE TCCD is super hot when doing benchies at 2.85vdimm. How about you guys??? It is hotter than my previous TwinMos SP st 3.6vdimm.

http://img287.imageshack.us/img287/4...erpi1mil9g.jpg

[|SiLA|]

my cpu is blocking me tried gm and memtest @315 2,5-4-3-5 with same alphas moved max async from 9 to 8 still kicking

[targ]

yes, most performance ram gets warm to hot, thats why these modules have the temp sensors on the side. i would suggest an 80mm fan blowing on them.

i fact i would suggest it to any one overclocking ram.

targ

[longsiew]

yes, most performance ram gets warm to hot, thats why these modules have the temp sensors on the side. i would suggest an 80mm fan blowing on them.

i fact i would suggest it to any one overclocking ram.

targ

My one does not have temp sensor on the RAM

[|SiLA|]

yes, most performance ram gets warm to hot, thats why these modules have the temp sensors on the side. i would suggest an 80mm fan blowing on them.

i fact i would suggest it to any one overclocking ram.

targ

i've been looking for that sensor before i bought it and after..where is it?

[targ]

on the side of the strip, 4 boxes with numbers in them, and the realevnt box lights up for the current temp.

simple yet effective.

targ