Junk Liquid Cooling Gallery

[Reflex1]

Heres mine



Quiet an old pix tho ...I'm in the process of upgrading to 1/2" tubing now ...and i broke that reserviour thats in the pix above ...so i'll have to purchase a new one. I'll post new pix of it once im done (might be a while tho, since im busy with school )

[Prokopek]

here is mine.. now I´m converting it to level 2.(totally passive cooled no fans)




and this is foto from lan party

[empty]

heres mine

[funktional]

Small tubing as I use low-flow blocks. The radiator is on the right side between the 4 172mm fans

[REDKEN]

OK here goes!
After a looong time of researching and preparation (1 year on/off researching. 3 month final preparation. 1 month modding and assembly)(yes! I took my sweet, sweet time ) I finally finished my first watercooling setup First I would like to thank ALL the people that helped me directly and in-directly to get my rig up and running from here and other forums as well
All relevant watercooling parts:

- White Water
- MCW20
- MCW50
- 1/2 Clearflex
- 2-342 heater core (2" shroud on both sides)
- 4 Panaflos 120mm L1A push/pull (1 extra for burners)
- Iwaki MD-15RLT (shrouded)
- Lian-Li Pc 70 case (very moded)
- Rest in my sig...

[DoGMaN]

Started with this


finished with this

[fuqqa]

[fuqqa]

Originally posted by h0ok3r
you need cable sleeving dude, its a mess!!

what rad do you have?T hat waterblock looks nice, but its a bit restrictive right?(innit the cuplex evo sumthing?)

yeah i know :>
but gpu/nb/dual-hdd waterblocks comes soon....

radiator is watercool htf2x-dual
cpu cooler is a "Cape KC 42-X2 PLEXi"

[fuqqa]

litle update... : :>

[CookiePuss]

allrighty, here we go.

[Jethro]

Wow some nice looking setups posted here!

Heres my 1/2 setup! oversized radiator is outside of box. Soon to be a watercooled GT in there!

[Pha_Q]

since these pictures i have added 2 120mm 105cfm fans to the bottom of the radiator, temps are nice.

[Jethro]

Update with MCW40 installed on fx5900! CPU stays tween 39~44 and 5900 idles at 44 gets up to 52 typically!

[ilstallione]

Hello! My first post here att extremesystems. Been reading a lot though
Well here are my pictures. I let them speak for themselves but if there is something you guys wonder just ask.

Watercooling stuff

Eheim 1048
Heatercore with shroud
RBX
Maze 4 Gpu

Hardware:
Intel P4 2,4c @ 3120mhz
2*256mb Kingmax Hardcore @ 260mhz FSB (Need more v-dimm)
Abit IS7-E
Radeon 9700np @ 372/324

Temp full load cpu about 45c















Sorry for my bad camera but i am a poor student

/ilstallione

[Hilppa]

Did it with my friend. It's aseteks waterchill inside.

[Sommer]

Raidmax Scorpio 868W miditower case

Cooling - Swiftech MCW6000-P, Eheim 1001 Compact 600L/h (160GPh), D-Tek Pro120 w/shroud, 1x120mm Titan 133cm/h (79CFM) (pull) fanmate 1500RPM, 2Liter Reservoir, 10mm(3/8") + 13mm(1/2") Kuriyama tubing.

Motherboard - MSI 865PE Neo2-PFS MSI-6728 v.2.0 bios 3.8
CPU - Intel Prescott 2.8E@3.5E 1.525v 29idle/43Load

Rad and pump outside, maybe a cm stacker case later on for all
inside. So far running great.

Inside

Rad

Res

[bh2k]

[khellandros66]

Here is mine







DD TDX 478
DD Maze 4 GPU
Hydor L20
ModdersHQ Custom RAD+Shroud
Enermax 120mm
Asetek Res

~Bob

[caLume]

[caLume]

it brings it all together

[Capt_13M]

Here's mine, It was my first time going with water, and I was a lil skeerd of fitting it all inside my case, and having leaks and shyte.

[o27]

A little pic of my new super-duper FX-53 wc setup

I have an entire thread on the entire project right here:Project FX53 in case anyone is interessted

[MaxxxRacer]

Here is my updated system with the 2.8ghz mobile chip.

[Adasi]

Hi!
Here are some photos of my cooling supply. In several pic's you can see testing tagan 380W but these photos also include WC

www.gorajec.net/Adasi/WC/ex/



I'll take some closer photo's today, i hope...

[MegadetHCl]