Fx-53 Claws & Blaster benching session

[Claws]

Just trying to make a few world records go down, such as Super Pi and máx speed.
Specs:
DFI SLI-DR
Geil Bh-5 2x512
Fx-53 (obvious )
OCZ 620Watts





Achieved with the impressive Blaster's dual stage cascade, in a greatly spent Saturday afternoon

[massman]

Great work, bro, but I'm afraid you'll need ln² to break records

[blind_ripper]

great wok on the blaster cascade

[gianni-gt]

nice clocks... vcore? validation?

[Blaster]

vcore was 1,82

http://www.hwbot.org/result.do?resultId=592737

i think its cpuz and spi wr

[stunned_guy]

Thats genial
Give more Voltage and you will get more MHz....more than 2 V is the key

[Claws]

Thats genial
Give more Voltage and you will get more MHz....more than 2 V is the key

We tried a little more voltage, but 1.82v was the real sweet spot.
As for more Mhz... it isn't impossible, but it won't go much further... It is possible to achieve an even better superPi result, it won't take much effort

[i found nemo]

get some uccc or tccd

[|-jokker-|]

Congrats Blaster and Claws go go go .

About the ln2 there is no problem at all only say when you want it .

[Blaster]

get some uccc or tccd

results are much better with tight timings

[stunned_guy]

No TCCD or UCCC this will sucks...only BH-5 or CH-5 is the key

[i found nemo]

tccd/uccc @ 300 mhz 3-4-4-10 pwn bh-5/ch-5 @ 255 1.5-2-2-10

[Bei Fei]

Nice work, I have a fx-55 that I got for next to nothing. Bad thing is I havent taken it outta the box. One of these days I will when I finish my 1000 other projects.

[[_Silence_]]

tccd/uccc @ 300 mhz 3-4-4-10 pwn bh-5/ch-5 @ 255 1.5-2-2-10

Don't forget the good BH5 kits that bench at 285Mhzs 2-2-2-5, beat that
(still have 2 2x256Mb kits that can do it )

[hey]

try at least 1.95v , btw , nice to see some oldskool oc

[afireinside]

tccd/uccc @ 300 mhz 3-4-4-10 pwn bh-5/ch-5 @ 255 1.5-2-2-10

Yeah except 300 is pretty good for TCCD/UCCC and 250 is sub par for bh5. Plus cas 1.5 doesn't work.

[i found nemo]

Don't forget the good BH5 kits that bench at 285Mhzs 2-2-2-5, beat that
(still have 2 2x256Mb kits that can do it )

haven't we seen tccd past 320+?

Yeah except 300 is pretty good for TCCD/UCCC and 250 is sub par for bh5. Plus cas 1.5 doesn't work.

yes it does i had utt that did the exact timings and frequency i told you @ 3.2 volts

brb headed to search for the thread

- edit, well i can't find the file but i swear my utt did that.

[CCUABIDExORxDIE]

tccd/uccc @ 300 mhz 3-4-4-10 pwn bh-5/ch-5 @ 255 1.5-2-2-10

3-4-4-10, no way. 2.5-3-3, possibly. ddr500 2-2-2 is equal to ddr600 2.5-3-3, and trust me, finding a set of tccd that did ddr600 2.5-3-3 was a pain in the balls.

bh-5 that would do ddr500 2-2-2 was very easy, companies binned bh-5 to do that. bh-5 ftw!

[Schmetterling]

I ran my old 2X 256MB G.Skill PC4400 (TCCD) at 350Mhz 3-4-4-8 (3.0 volt) but for benching my good old 2X 256MB Muskin PC3500 (BH-5) at 280Mhz 2-2-2-5 (3.8 volt) was still better in SuperPI and such.

[NickS]

Nice results guys

No TCCD or UCCC this will sucks...only BH-5 or CH-5 is the key

Yup

tccd/uccc @ 300 mhz 3-4-4-10 pwn bh-5/ch-5 @ 255 1.5-2-2-10

In Pi? No way!

Yeah except 300 is pretty good for TCCD/UCCC and 250 is sub par for bh5. Plus cas 1.5 doesn't work.

Yup, CAS 1.5 is actually slower than CAS 2

[[_Silence_]]

haven't we seen tccd past 320+?

With high timmings ya, but for SuperPi BH5 at 285Mhzs 2-2-2-5 performs better than TCCD at 320Mhzs with higher timmings.

[CCUABIDExORxDIE]

i dont think tccd would ever be competition for bh-5 when it comes to benching, when it comes to 24/7 operation, tccd might be a winner do to lower volts though. less stress on components and the on die memory controller.

[nzbleach]

BH5> TCCD. I had my TCCD benchable at 350mhz/DDR700. Still couldnt trump BH5 at 270mhz 2-2-2