Simple Overclocking Test on Foxconn Quantum Force BLOODRAGE

[welder]

Hi guys, this is my first post in xtremesystems

Most Vendors have released their X58 boards already. For sure, Foxconn's Hi-End product line "Quantum Force" will also release their X58 board soon.
You guys should already heard the name of Quantum Force's X58 board, it's called Bloodrage.


Motherboard Specification
Motherboard Chipset: Intel X58 + ICH10R
Motherboard power designed: 14 Phase(for CPU) + 2Phase(VTT) + 3 Phase (for Memory)
Storage Chipset: Marvell 88SE6320 SAS/SATA chip, Jmicron 363 chip(eSATA + PATA)
Ethernet: 2x Realtek RTL8111C
Audio: Sonar X-Fi


Front View, Blood Red with Deep Black, it seems Dracula Style
3Phase PWM extended the VDIMM's stability.






LGA1366 and LGA775 Mounting Hole(allow overclockers to install thier LGA775 Pot)






14 Phase CPU PWM Designed






Onboard Power On and Reset button






Dual BIOS and Debug LED






Force Reset Button , a friendy designed for overclockers.
While Overclocking Fail and system hangs, just press the button, it will Power Off your board -> Clean CMOS -> Power On your board.




**********


Test Configuration
Motherboard: Foxconn Quantum Force Bloodrage (X58 + ICH10R)
CPU: Intel Core i7 Extreme 965
Memory: Adata Vitesta 1600 3GB Kit
Cooling: Aluminum Pot(Made by OCHaven Forum)
Operation System: Microsoft Vista Ultimate 32Bit


BCLK and QPI Link Overclocking Test

BCLK=220MHz
QPI Link=7942MHz
Vcore=1.52
CPU Frequency=4191MHz





Memory Frequency Overclocking Test

Memory Frequency= DDR3-2100 CL10-9-9-24 @1.7 Volt
CPU Frequency=4426MHz

Pi 32M Passed





Test Bed




Memory Overclock to DDR3-2513 and hit the WR, CPU-Z Validation
http://valid.x86-secret.com/show_oc.php?id=454079





Duo to just ran out of LN2, so extremely overclock the CPU later.

Cheers and thanks for your reading
Test By 【Welder】

[Slovnaft]

wow, thread title "simple overclocking test"...you didn't say to bring a cup.
nice job, epic first post.

now what qpi/dram voltage (or vtt whatever you call it) did you use to get 2500 ram and (i'm assuming) 5000mhz uclk?!

[OCX600RR]

LOL simple overclock test I love it! Damn that motherboard looks good...nice test my man!

[cky2k6]

simple indeed, simply the sexiest mobo ever...

[Solarfall]

mmm what sort of cooling was used.. dice or ln2?? and yeah that board is pretty damn sexy

[welder]

what qpi/dram voltage (or vtt whatever you call it) did you use to get 2500 ram and (i'm assuming) 5000mhz uclk?!

The CPU VTT Voltage(CPU QPI), I set 1.6Volt when running the memory overclocking

I got some memories from memory makers, maybe can reach higher later

mmm what sort of cooling was used.. dice or ln2?? and yeah that board is pretty damn sexy

I used LN2

[Achill3uS]

nice run and welcome @ XS welder
how much vdimm did you feed for that ~2500mhz? and what about tri-ch, could you go over 2100?

[CornerJack]

Very nice Welder

[giorgos th.]

i don`t know about performance but it`s sure sexy as hell.........

[Slovnaft]

The CPU VTT Voltage(CPU QPI), I set 1.6Volt when running the memory overclocking

I got some memories from memory makers, maybe can reach higher later



I used LN2

wow, that's actually not that much qpi/vtt. I guess bloodrage has no vdrop in qpr/vtt? My R2E drops 0.05v from BIOS to real with dmm, which is really annoying as 32M is rather uclk dependent.

[loopy83]

Amazing RAM Speed.... very nice Board.... nice results.... very very nice first post

Welcome...

[Knight203]

Sexy mobo, epic first post!

[saveus222]

talk abt entries. urs is the best so far. nice board...

[Oliver]

great work and it seems to scream huh

welcome to xs and i like yoru first post

keep pushing it

[Hazzan]

Nice result actualy on memory speed...welcome to XS

[T_M]

I notice that you seem to be benching in the Foxconn lab (i recognise the desk/shelves in the photo).
Do you work for Foxconn, and if so in what role?

Nice board too btw.

[TheKarmakazi]

Great first post, and totally wicked RAM! This mobo looks impressive!

[BenchZowner]

I notice that you seem to be benching in the Foxconn lab (i recognise the desk/shelves in the photo).
Do you work for Foxconn, and if so in what role?

Nice board too btw.

Hehe, good catch Tim

Welder should be Peter Wei who worked for Abit in the past.

[HDCHOPPER]

welcome welder !

and thanks for the BloodRage results just knew this board was going to be a killer board for mem ocing hopefully it does as well for cpu also

nice to see you pushing it too

let's see WR cpu speed next

the BloodRage is going to be a 10 year board may be the last one eye ever need

[jugeen]

really nice performance and achievement

but the DDR3 WR is DDR3-2682MHz at CL9-9-9-34, valid, more info

[Bullet92]

Man, that's toooo hooot! Want one. The price of this board should be ~400$ and with this performance and everything that comes with the board, it worth all ~400$.
Keep pushing it and keep us informed.

btw. Welcome to XS forums

[czepluch]

Nice first post and VERY nice mobo.

There is just one thing i dont understand - How is it possible to run the RAM at that speed with the i7-920? Or is it just a bug in cpu-z that says the OC was made with a i7-920?

[George_o/c]

2500MHz ... Simple testing Nice one !

OMG that mobo turns me on

[Spacemaster]

Why the CPU score with Vantage and HT on is so low?
7269 at 4191 MHz is realy low

[jesperme]

Xtreme first post and congrats