Xp-M@H2O Pwr by Coolpc

[Jeff037]

Hello to all. after a po of test to water, they are successful to having this I turn out:


my record of fsb on the nf7:


the used hardware is following:

AMD ATHLON XP-M 2600+
2x256 CORSAIR XMS 3500 C2 (with bh-5 chip)
ABIT NF7-S REV 2.0
SUPERFLOWER 520W TRIPLE FAN

& KIT h2o ALPHACOOL


and the next step it will be:

Vddr Mod 3,3v rail
Vdd Mod on the Chipset
Co2 Cooling

every powered by Coolpc.it

[psiko]

nice... Can you pass superpi 1mb ?

[Jeff037]

in order now not, but I hope that under co2 I succeed to us. I would want also to hold the ram in sincrono, therefore to go better... but me it serves the mod

[maverick89]

nice score

[psiko]

then...this is a suicide screen, no?

[Jeff037]

eheh... yes, but I have touched also 2,114 of vcore with one smaller frequency.

..suicide....

[psiko]

go faster ! Sorry but I am from Spain and my English is not very good

[Ludus]

Jeff is from italian, as me, and also our english is bad
nice jeff, use a co2 container and break some records

[Lithan]

Jeff, is that ordinary water or is it chilled?

[Rauf]

very nice speed!

[masterchorch]

i gues it's an IQYHA from w52 03?

[Sesto Sento]

GREAT CPU u have there
Hope to see 3.3/3.4ghz (maybe 3.5 )on Dice soon hehehe

[[XC] moddolicous]

yea, nice job. Get it under DI or LN2 and get it up to 3.4-3.5.

[Mahoney]

WD Jeff!

as far as I know current WR for Socket A is 3,3 ghz stable. I think you can do better than that Jeff

[dippyskoodlez]

WD Jeff!

as far as I know current WR for Socket A is 3,3 ghz stable. I think you can do better than that Jeff

prolly around 3.3 stable, 3.6 suicide. ive got a CPU i know could do it, but no cooling to take it there

[FriGidi]

Nice oc Jeff

[Jeff037]

thanks to all. I cooled with simple water of tap. Now, as soon as I end the tube for co2, I hope to touch the 3,3ghz.... now, I must make also a pair of modifications the nf7, therefore try to touch the 32'.

I have seen people, to arrive to 3,4ghz with this processor, but smashing in the cache. the limit of these processors is the cache. under Ln2, creed will not resist to along.

not there is some modification that it makes me to go the vdimm beyond 3,3v?

still thanks

.jeff.

[Jeff037]

i gues it's an IQYHA from w52 03?

yes...

ps:nice score

[Xyus89]

hi there,

indeed very good cpu stepping!!
If it reaches this speed on h²o who knows what it will do on a phase change or dry ice..

good luck!

Xyus

[V4n{}u|sH]

Nice guy

[Rauf]

not there is some modification that it makes me to go the vdimm beyond 3,3v?
.jeff.

there is a mod where you connect the 3.3V rail from PSU to the memory on the backside of the card. then you can increase the 3.3V on your PSU.
i can't find a link or picture of the mod though...

[masterchorch]

right, nf7-s rev.2 is modable to 3.3v rail, but i can recommend the ocz boosterm they'll work great on slot1 and u will arrive higher voltages.

suicide wr on socket a is 3.62ghz.

did u mod u're vdd voltage for fsb267, or is that dc stock?

[WeStSiDePLaYa]

there is a mod where you connect the 3.3V rail from PSU to the memory on the backside of the card. then you can increase the 3.3V on your PSU.
i can't find a link or picture of the mod though...

i think there is a better way and its to connect to the dimm caps. that way you dont get the flucs.

[Jeff037]

right, nf7-s rev.2 is modable to 3.3v rail, but i can recommend the ocz boosterm they'll work great on slot1 and u will arrive higher voltages.

suicide wr on socket a is 3.62ghz.

did u mod u're vdd voltage for fsb267, or is that dc stock?

the voltage on the nb is stock(1,7v)and cooling is stock

[masterchorch]

damn lucky boy

i needet 3 vdd mods, ~1.9v and cooling with water chilled by -15°C air for simple 243mhz