Whats the difference between this and the VF900?
Zomg that is teh ub3r 1337 pwnage I will definately spend more for that.Originally Posted by vapb400
![]()
![]()
hmmm
they dont even list it on zalmans site
#1
Evga 680i * Q6600 G0 * 4x2gb g.skill Pi * Evga GTX260 (216) - sli * x-fi fatality * Corsair HX1000
#2
Asus Striker II Formula * Q6600 G0 * 4x2gb corsair * Evga 9600gso * corsair hx620
#3 WIP
Asrock Z77 Extreme4-M * 3570K * 2x2gb samsung * 60gb SSD
I know it should be out really soon but they say it's already in stock and this store is pretty reliable.
Lol. I love it how all the big hardware companies jump on the Fatal1ty bandwagon. One appearance on MTV and they think the guy is a celebrity with the kids. They're just trying to make as much money as possible, and who can blame them? And Fatal1ty, too. That guy has got to be loaded...
Abit KN8
AMD Athlon 64 X2 4400+ @ 2.6GHz
Thermalright SI-97A w/56 CFM Panaflow
2GB G.Skill DDR500 GBHZs 0603
eVGA GeForce 7600GT w/Zalman VF700-CU
Sound Blaster Audigy 2 ZS
160GB Western Digital 160GB Hard Drive
500W XG Vortec Ver. 2 PSU
NZXT Zero/Logitech MX518, X-530/Saitek Eclipse
CPU soon to be under WATER (this time I mean it)
Planned '07 upgrades: 19" widescreen LCD, mid-range DX10 card
MAkes you wonder if it will be able to cool an X1900XTX. I know the VF-900 can't.
Well i like the new coler instead of the red ones they used to make.
Originally Posted by GusC
umm..... are you talking about copper?
Specs
Asus 780i Striker II Formula
Intel E8400 Wolfdale @ 4050Mhz
2x2GB OCZ Platinum @ 1200Mhz 5-4-3-18
MSI 5850 1000Mhz/5000Mhz
Wester Digital Black 2TB
Antec Quatro 850W
Cooling
Swiftech Apogee
Swiftech MCP-600
HardwareLabes Black Ice Extreme 2
Audio Setup
X-fi w/AD8066, Clock mod, & polymer caps > PPAV2 > Grado SR60 & Grado SR325i & Beyerdynamic DT770 Pro & Beyerdynamic DT990 & AKG K701 & Denon D2000
About $50 I'm sureOriginally Posted by Baldrick
![]()
Dual CCIE (Route\Switch and Security) at your disposal. Have a Cisco-related or other network question? My PM box is always open.
Xtreme Network:
- Cisco 3560X-24P PoE Switch
- Cisco ASA 5505 Firewall
- Cisco 4402 Wireless LAN Controller
- Cisco 3502i Access Point
no copper is more orange. it was red!Originally Posted by WeStSiDePLaYa
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
Isn't it nickel coated copper which worsens performance in aid for a more shiney appearance?
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
A quick lapping will remove the nickel coating. I really can't understand why anyone would coat copper with nickel on a heatsink. Copper has about 10x the thermal conductivity. It seems to me that the nickel is just a big waste of money.
Abit KN8
AMD Athlon 64 X2 4400+ @ 2.6GHz
Thermalright SI-97A w/56 CFM Panaflow
2GB G.Skill DDR500 GBHZs 0603
eVGA GeForce 7600GT w/Zalman VF700-CU
Sound Blaster Audigy 2 ZS
160GB Western Digital 160GB Hard Drive
500W XG Vortec Ver. 2 PSU
NZXT Zero/Logitech MX518, X-530/Saitek Eclipse
CPU soon to be under WATER (this time I mean it)
Planned '07 upgrades: 19" widescreen LCD, mid-range DX10 card
You're going to lap all the fins and heatpipes down to the copper? There won't be anything left, maybe a bit of paper thin copper and after all that time, you could've just bought a vf900-cu?Originally Posted by Zardokk
lol![]()
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
Originally Posted by eXa
ive seen some of their sinks that looked very red, and they are only copper, some other copper sinks look that way as well.
i dont see what other thing he could be talking about then, unless it was red andonized aluminum which ive never seen zalman make.
Specs
Asus 780i Striker II Formula
Intel E8400 Wolfdale @ 4050Mhz
2x2GB OCZ Platinum @ 1200Mhz 5-4-3-18
MSI 5850 1000Mhz/5000Mhz
Wester Digital Black 2TB
Antec Quatro 850W
Cooling
Swiftech Apogee
Swiftech MCP-600
HardwareLabes Black Ice Extreme 2
Audio Setup
X-fi w/AD8066, Clock mod, & polymer caps > PPAV2 > Grado SR60 & Grado SR325i & Beyerdynamic DT770 Pro & Beyerdynamic DT990 & AKG K701 & Denon D2000
the previous Fatal1ty Zalman was anodized red, with matching ramsinks.
Red Zalman heatsink:
Last edited by cadaveca; 02-29-2008 at 03:12 AM.
Originally Posted by Baldrick
Me too![]()
PC Lab Qmicra V2 Case SFFi7 950 4.4GHz 200 x 22 1.36 volts
Cooled by Swiftech GTZ - CPX-Pro - MCR420+MCR320+MCR220 | Completely Silent loads at 62c
GTX 470 EVGA SuperClocked Plain stock
12 Gigs OCZ Reaper DDR3 1600MHz) 8-8-8-24
ASUS Rampage Gene II |Four OCZ Vertex 2 in RAID-0(60Gig x 4) | WD 2000Gig Storage
Theater ::: Panasonic G20 50" Plasma | Onkyo SC5508 Processor | Emotiva XPA-5 and XPA-2 | CSi A6 Center| 2 x Polk RTi A9 Front Towers| 2 x Klipsch RW-12d
Lian-LI HTPC | Panasonic Blu Ray 655k| APC AV J10BLK Conditioner |
I'd just lap the base. That's the part that really counts. But yeah...I'd never buy one of these Fatal1ty heatsinks in the first place, I would just get a VF900.Originally Posted by lawrywild
Abit KN8
AMD Athlon 64 X2 4400+ @ 2.6GHz
Thermalright SI-97A w/56 CFM Panaflow
2GB G.Skill DDR500 GBHZs 0603
eVGA GeForce 7600GT w/Zalman VF700-CU
Sound Blaster Audigy 2 ZS
160GB Western Digital 160GB Hard Drive
500W XG Vortec Ver. 2 PSU
NZXT Zero/Logitech MX518, X-530/Saitek Eclipse
CPU soon to be under WATER (this time I mean it)
Planned '07 upgrades: 19" widescreen LCD, mid-range DX10 card
The Zalman FC-ZV9 has the following:
The FC-ZV9 provides unbeatable performance for overclockers and gamers. The cooler has a copper base and fins for excellent cooling performance. Two high performance heatpipes allow faster heat transfer and the ultra-thin radial fins for smooth airflow. The heatsink is black coloured and has an ultra quiet red LED fan.
- Dimensions: 96(L) X 96(W) X 30(H)mm
- Weight: 185g
- Base Material: Pure Copper
- Speed: 1650 - 3600rpm
- Noise Level: 20 - 36.0dB
Compared to VF-900 Cu:
The Zalman VF900-Cu is the ultimate quiet cooler for video cards due to its pure copper heatsink and dual heatpipes for maximum performance. Ultra-thin (0.2mm) copper fins minimises airflow resistance and supplied with a Zalman FanMate 2 controller to balance cooling and noise. The lightweight design minimises excess force on the VGA card.
- Supports all of the latest graphics cards including ATI X1900 and nVidia 7900 Series graphics cards.
- Speed: 1,350 - 2,400 RPM
- Noise Level: 18.5 - 25.0dB
- Base Material: Pure Copper
- Bearing Type: 2-Ball
- Weight: 185g
And this is the VF-900 Cu LED version:
So they're exactly the same apart from colour and the fact already stated that the FC-ZV9 has a faster fan lol.
Last edited by RAGING DRAGON; 08-12-2006 at 10:44 AM.
The next time you're having a bad day, imagine this:
You're a siamese twin.
Your brother, attached at your shoulder, is gay.
You're not.
He has a date coming over tonight.
You only have one ass.
UK Conroe Sellers:
http://www.xtremesystems.org/forums/...&postcount=216
The VF900Cu-Led is already loud and they release another version with a louder fan!?? lol
Yup, Zalamn anodised the Wendy coolers.
Didnt know he'd been on MTV... why? He plays computer games...hardcore overclockers are cooler than him
I`ve had one Wendy product...the Abit NF4 SLI board. I`ll never buy anything else with his name on it.
He's not a bad guy...he's just trying to cash in on his skills as a gamer. And why not? If I was that good, I'd try and make cash from it, too. But yeah...Fatal1ty products are a waste of money. They had a poll at the Abit website to see what people liked about the new Fatal1ty mobo and the number one answer was "flashing LED lights". Lol...throw some lights and a Fatal1ty name on something and you can jack the price up 50%.
Abit KN8
AMD Athlon 64 X2 4400+ @ 2.6GHz
Thermalright SI-97A w/56 CFM Panaflow
2GB G.Skill DDR500 GBHZs 0603
eVGA GeForce 7600GT w/Zalman VF700-CU
Sound Blaster Audigy 2 ZS
160GB Western Digital 160GB Hard Drive
500W XG Vortec Ver. 2 PSU
NZXT Zero/Logitech MX518, X-530/Saitek Eclipse
CPU soon to be under WATER (this time I mean it)
Planned '07 upgrades: 19" widescreen LCD, mid-range DX10 card
so does the coating on the fins/heatpipe affect performance ?
I really dont like the guy, however, I want to get this cooler for one simple reason.... red LED which matches my mod perfectly.
Bookmarks