Does anyone have any of them.
Does anyone have any of them.
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Post some pics of the back of the card.
ok iw ill in the mornng
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Time to bump the thread.
A few of us have a competition running in the x600xt category, and some help for Vmods would be greatly appretiated!
If no-one can find any I guess I'll have to try my best to locate it meself
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
If you can give us the pics then we can work it out.
Chances are it will be similar to another card of the same generation.
Bump and just did some searching I am not sure if the pics need to be closer or not.
Front of card
Back
If others needed I'll try to snap some tomorrow night.
Here is my card. Its a refference BBA card so the layout should be defacto the same on most cards. If you want a more detailed picture please send me a PM, we are currently at least 3 people who would like the mods
Back of card
Front of card
Note the National Geographic, that was an excellent issue
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
Can you tell me what is written on the chips I have circled please.
ISL6522CB
P349BLZ
All are the same
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
Can you check the voltages at pin 8 on each of the ISL6522's, as I've marked in this picture.
Yeah, I will do so - I need to get a finer tip though, the one I was using was too big I think.
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
![Send a message via AIM to =[PULSAR]=](images/misc/im_aim.gif)
![Send a message via Skype™ to =[PULSAR]=](images/misc/im_skype.gif)
Any updates on these vmods I could sure use em =)
(from the other X600 modding thread)
The 1.07v looks like Vgpu, the 2.62v is probably the Vdd and 2.26v is Vddq.Originally Posted by Melx
Can someone check the resistance between the points I have marked and ground please (you can check resistance with the power off btw).
now, new values, multimeter battery was allmost dead, 9v to 7,5v
left corner - 2,62v & 1,78kohm
up right - 2,79v & 60,2ohm
down right - 1,26v & 3,4ohm
Were those resistances taken between the pin I marked in the first post (one of the outside pins), or were they taken from the pin I marked today? Some of the readings look a bit low to me.
i used this pic
http://tom.drunken-student.co.uk/mods/David%20019.jpg
Sorry, I forgot to attatch the picture
I've attatched the correct picture now
what i measure, resistance ?
Yes, check the resistance. Can you see the points that I marked ok? It should be pin 5 that I marked.
all are pin 5 ok ?
yea, all are pin 5
left corner - 5,80 kohm
up right - 5,78 kohm
down right - 5,76 kohm
+- 0,01
Those values are more like what I was expecting
For all of the mods, try putting a 100k VR between pin 5 and ground.
Note: XS owners and members will not be liable for any damage caused to you or your hardware, neither can be liable for any breach of the warranty.
hmm, if i want gpu mod then i but between 1,26v and ground ?
what is vr, some sort of resistor, sorry, im dumb.
VR=variable resistor
You need to put the variable resistor between pin 5 (the pin that you measured the resistance from) and ground. I can mark it on a picture for you if you need me to
Posting Permissions
Reply With Quote
Bookmarks