hello
I am French and I speak very badly english it but I espere that you will include/understand me
I would like sent a tension of 3.3 volts for my GDR (twinmos). I board a p4p800 dlx (2003)
I know that it y' has 1 soldering wire, but which and or? diagram?
thank you for your assistance
I board dejas makes on this p4p800 a vmod (50k/lm358) but the tension goes down from 3.18v has 3.05 volts in load.
t is for that that I want tested a 3.3v. my food is a tower antec 1080
Last edited by fred; 04-08-2005 at 01:25 AM.
There is a Vdimm mod for the p4p800 here . You might also need to raise your 3.3v line if you want to run 3.3v or more through your RAM.
not persivore I board dejas does that. it is not what I want
how to obtain from the 3.3 v by welding a wire? thank you
Last edited by fred; 04-08-2005 at 01:25 AM.
The problem is probably your PSU's 3.3v line. You usually need your 3.3v line to be 0.2v above your Vdimm
Sorry, I didn't see your edit. You should be able to adapt this for your board (connecting pin 7 of the Dimm slot to the 3.3v line).
Last edited by persivore; 04-08-2005 at 01:28 AM.
is it the same thing for the p4p800 dlx.. ?Originally Posted by persivore
I want 3.3vio=vdimm
Last edited by fred; 04-08-2005 at 03:51 AM.
It should be the same. You might have to adjust the mod for the different board layout tho.
I don't understand
what shall I keep exactly? here ?
what link shall I keep simply to have ? vio = vdimm
http://www.xtremesystems.org/forums/...5&pagenumber=1
Is there simply this wire to connect ?
http://www.uploadyourimages.com/view...1849fl0000.jpg
Last edited by fred; 04-08-2005 at 04:42 AM.
The wire in your second picture should be the only one you need to connect. The others are just to help make the mod more stable.
thank you very much. I
I go tested
many probléme with the English language
nb: it is certainly necessary dismounted all the motherboard...? to do that
Last edited by fred; 04-08-2005 at 05:07 AM.
very well, some image of my work thank you of your assistance
http://www.uploadyourimages.com/view...9192fl0000.jpg
http://www.uploadyourimages.com/view...6011fl0001.jpg
http://www.uploadyourimages.com/view...4586fl0002.jpg
Good job, bro!
from the french....... thank you ,Malves
I made another vmod
material
http://www.uploadyourimages.com/view...7180fl0002.jpg
before downloading with memtest
http://www.uploadyourimages.com/view...1800fl0001.jpg
detect the compensator link
http://www.uploadyourimages.com/view...0578fl0003.jpg
cut the link
http://www.uploadyourimages.com/view...7318fl0004.jpg
welded la resistance
http://www.uploadyourimages.com/view...0682fl0005.jpg
welded le potentiometre a la resistance
http://www.uploadyourimages.com/view...5914fl0006.jpg
the other link of the potentiometre a la masse (whatever black link)
http://www.uploadyourimages.com/view...9094fl0007.jpg
ending
http://www.uploadyourimages.com/view...9743fl0010.jpg
result
http://www.uploadyourimages.com/view...7039fl0009.jpg
aida32
http://www.uploadyourimages.com/view...tat_aida32.jpg
Will I reach the P4P800 motherboard limits?
Because when I reach fsb=250MHZ, it doesn’t start.
http://www.uploadyourimages.com/view...1704fl0000.jpg
http://www.uploadyourimages.com/view...4340fl0001.jpg
http://www.uploadyourimages.com/view...9054fl0002.jpg
Are the Vmods fpr p4p800 E and p4p800 the same? i need some for ct479
Abit TH7-II Vdroop- und Vrimmod - cooled by Selfmade NB-Cooler
C4M SL75J - cooled by AAF
4x Samsung PC800-40 - cooled by 2 x Papst 612 - 60mm
Asus V9950 - FX5900@5950U - cooled by CCR09
Netgear WG311v2
Samsung SP1614N
LG GSA-4040B
Posting Permissions
Reply With Quote
Bookmarks