AQXDA, AQXEA--is the E better than the D; I have a D

[Sprocket]

I haven't tried it out yet, but I was wanting to know if I should try to sell it and try to get an E if an E is pretty much guarranteed to do better... umm... right.

would anyone mind posting their highest stable oc's with the d's and e's... thanks!

plus I have air cooling [slk800, smart case fan II]... so if you've got water, vapo, etc.... well, then... I don't guess it'll help me much cause I don't have that. oh well whatever

oh yeah, 2500+ bartons, forgot to include that

[Sprocket]

ah, then there's hope! that's a relief! now all I need is time--time to try it out... I've just been so busy here lately. ah well. thanks!

[GRexer]

Well, i've got a AQXDA 0320MPMW that does 2.2GHz at stock voltage with normal air cooling(SK7 + a normal 35CFM fan), doing burn in at 10x220MHz on a NF7-S v2.0 now.

[Sprocket]

so... I should be able to get higher with possibly more voltage and my cooling, hopefully. and your's being a barton at 2.2ghz, it probably already outperforms my tbred at 2.3. cool. I wish I could get my fsb up--it's only at 200 right now, anything above it is unstable. I already posted about that... but don't remember what they told me to do.

[B4E]

IMHO AQXDA is better than "E", I've tried 20 AQXEA 0321 and could get only 2400MHz at 2V, with AQXDA 0311 I could arrive over 2500MHz with the same voltage

[dmon]

Luck of the draw. My AQXEA 0321 does 2500 @ 1.95

[Sprocket]

Originally posted by B4E
IMHO AQXDA is better than "E", I've tried 20 AQXEA 0321 and could get only 2400MHz at 2V, with AQXDA 0311 I could arrive over 2500MHz with the same voltage

whoo hoo! well, that gives me hope. what cooling were you using? what do you think I'll be able to get with mine (should be in sig). thanks! oh yeah, I ran prime95 for 10 hours with my 1700+ at 2.3ghz, and it's stable! but my temps were up to 50C... of course my room temp right now is killing me--my skin is practically melting off my flesh as I type. well, ttyl!

[GRexer]

Well, IMO, AQXEA is a mixed batch of chips, MickeyMouse is getting his up to 2.7GHz using 1.85v and also a 226w pelt.

Well, i'm still trying out on this chip on mine, don't know whether will it do better, sometimes, higher clocks at stock vcore doesn't mean much, it might such when supplied with more juice, like one of my old JIUHB0302 that did 2GHz on stock vcore, but it needs 1.95 for 2.1GHz, that's bad.

Well, i've got a new Maze4 sticking along, but i doubt it'll bring lower temps as we've already mixed it wif a simple shoot out between the Maze3 and Maze4.

And, the chip runs cooler than my TBred 0310WPMW when both are set at the same vcore, FSB, and total clockspeed.

[Sprocket]

Originally posted by GRexer
And, the chip runs cooler than my TBred 0310WPMW when both are set at the same vcore, FSB, and total clockspeed.

What clock, fsb, vcore at what temps?

[GRexer]

vcore 1.65v, FSB 220MHz, and total clockspeed of 2200MHz.

The Barton seems to be having lower full load temps, around 2-3°C better.