okay im from finlad this is my first thread, so i need some help to mod my 9600 pro le (finnish overclockers didnt help me...)
i just search over 4 hours to some guides to mod this card but i didnt find that
i want help to vgpu mod!
please look pictures first, before you post some unoid thingst to here
unoids mod guides doesnt help me...
sorry my very bad english
A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
9600 Pro LE with vgpu mod
Good Job!
This is all I've managed to find so far. I think that its the right regulator but I'm not sure.
ok thanks but where to were i have to but variable resistor?Originally Posted by persivore
A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
9600 Pro LE with vgpu mod
Good Job!
Thanks for the link you sent. The data sheet I posted was the wrong one. Can you try to find a Vgpu read point on the card (Vgpu should be about 1.3v) and check the resistance between pin 2 on the 1575 chip.
ok i found 2 vgpu readment points and i got 1.182 volts and between pin 2 and both poins i got 12.69 Kohms so where i put my Variable resistorvgpu points maybe
Last edited by KeZzZu; 04-05-2005 at 10:43 AM.
A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
9600 Pro LE with vgpu mod
Good Job!
Posting Permissions
Reply With Quote
Bookmarks