"P5N32-E SLI" 522FSB done & more (pics inside)

[PcCI2iminal]

522FSB


validation
http://valid.x86-secret.com/show_oc?id=153157

512FSB



Command Rate 1t vs Command Rate 2t
Conroe 3600mhz
Crucial 800mhz
7900GTX stock
aqua03
1t->160062
2t->157192
cinebench
1t->single 597 multi 1110
2t->single 597 multi 1106
everest
1t->49.5ns 10485 Mb/s
2t->53.0ns 10047Mb/s
nuclearus
1t->10353
2t->10298
superpi 1mb
1t->14.422s
2t->14.453s
superpi 8mb
1t->3m22.297s
2t->3m29.297s
winrar
1t->1168KB/s
2t->1121KB/s




prime @ 2hrs "Crucial6400 1230mhz"


5-4-4-15 vs 5-5-5-15 vs 5-6-6-15
Conroe 3700mhz
Crucial 1230mhz
7900GTX stock





Everest
5-4-4-15->46.4ns 11097Mbs
5-5-5-15->47.5ns 11010Mbs
5-6-6-15->47.5ns 11043MBs

Pi32mb
5-4-4-15->16m 53.844s
5-5-5-15->17m 00.063s
5-6-6-15->17m 15.906s

Pi1mb
5-4-4-15->14.016s
5-5-5-15->14.000s
5-6-6-15->14.094s

winrar
5-4-4-15->1225KB/s
5-5-5-15->1206KB/s
5-6-6-15->1188KB/s

aqua03
5-4-4-15->164.809fps
5-5-5-15->163.515fps
5-6-6-15->162480fps

some fun with Gladiac 79GTX 745/1900mhz on air

3d01 60851
http://service.futuremark.com/compare?2k1=9122662
3d03 29962
http://service.futuremark.com/compare?2k3=5140061
3d05 13393
http://service.futuremark.com/compare?3dm05=2505269
3d06 7538
http://service.futuremark.com/compare?3dm06=918288


6800U 480/1298mhz @ SLI
3d01 57449
http://service.futuremark.com/compare?2k1=9122004
3d03 29356
http://service.futuremark.com/compare?2k3=5140080
3d05 12365
http://service.futuremark.com/compare?3dm05=2501285
3d06 6466
http://service.futuremark.com/compare?3dm06=911519

pics



MB: P5N32-E SLI 680i ( 0302 & 0602)
CPU: Conroe E6600 ES
CPU Cooler: Scythe Infinity
Main Fan: Sanyo Denki 120x120x38mm @ 104CFM
Fan: 120x120x25mm x 3 & 80x80x25mm x 1
VGA: Leadtek 6800U x 2 & Gladiac 7900GTX
Mem: Crucial 6400
HDD: Hitachi 40gb 7200rpm
PSU: Giga-EZ 1000w
Room temp: 19C
SO: WinXP Pro SP2

[Cyaneed]

Nice. I'm starting to wonder if I have a piss poor board or something because if I try that my temps are up near 75 in no time. And I've got a Tuniq 120 so either I didn't set the tower right or I seriously need to lap the proc. Teach me oh master of the air cooled machine.

[G H Z]

Check your contact with TuniQ, alot of them need lapping.

[msgclb]

522FSB

MB: P5N32-E SLI 680i ( 0302 & 0602)
CPU: Conroe E6600 ES
CPU Cooler: Scythe Infinity
Main Fan: Sanyo Denki 120x120x38mm @ 104CFM
Fan: 120x120x25mm x 3 & 80x80x25mm x 1

Would it still do 522FSB if your CPU wasn't an ES and those extra fans were turned off?

I want to see you put that system into a case!

What values did you set these to in the bios?
Vcore 1.50V
1.2VHT 1.49V
CPU VTT 1.54V
NB Core 1.63V

[PcCI2iminal]

Would it still do 522FSB if your CPU wasn't an ES and those extra fans were turned off?

I want to see you put that system into a case!

without fans i don`t know ,but this board can handle 522FSB with any Conroe, if it can be really pushed far

[PcCI2iminal]

What values did you set these to in the bios?
Vcore 1.50V
1.2VHT 1.49V
CPU VTT 1.54V
NB Core 1.63V

Vcore 1.45v
1.2VHT-> 1.45v
VNB-> 1.70v
CPU VTT->max

[irev210]

just curious what you can do with kentfield

If you have the time to test, plz let me know

[Synicalcop]

To bad that the strap kicks in at 400+fsb, look how horrible your memory bandwidth is-> 10000mb/s in everest im running 4-4-4-12 1t@ 800mhz and hitting 17000mb/s at 3200mhz

Here's a PIC
http://img224.imageshack.us/my.php?i...444121tiw6.jpg

[zeeke]

Nice test Mr Criminal. How far can you push the RAMs @ 1T, one of the guys at my forum have problem reaching 800 even..

[G H Z]

My will do 1T cas3 over 440mhz, has alot to do with the ram & voltages used. Hey criminal, try booting 424(1696) and then Clockgen @ Cas 3 or 4, it's much faster

[PcCI2iminal]

just curious what you can do with kentfield

If you have the time to test, plz let me know

Kentsfield will be the next for sure

for now i got a screen



that was with 0302 bios(1.42v max) and now with 0602 will be better

How far can you push the RAMs @ 1T, one of the guys at my forum have problem reaching 800 even

445mhz

[PcCI2iminal]

My will do 1T cas3 over 440mhz, has alot to do with the ram & voltages used. Hey criminal, try booting 424(1696) and then Clockgen @ Cas 3 or 4, it's much faster

thanks GHZ ,i still learning about that board ,i bought it 3 days ago and just now i can run over 500FSB ,just using bios ,can i ask what version of it is working on 680i? a new one from Frank or setfsb?

[CHRONiK]

Nice. I'm starting to wonder if I have a piss poor board or something because if I try that my temps are up near 75 in no time. And I've got a Tuniq 120 so either I didn't set the tower right or I seriously need to lap the proc. Teach me oh master of the air cooled machine.

Sounds like your having the same problem as me mate. Refer to http://www.xtremesystems.org/forums/...hlight=p5n32-e.

I'll let you know how I go, at present, I am waiting for another ultra-120 to test. Won't be for a week or so yet. If that doesnt make a difference, I might have to lap the processor.

If you find anything out can you let me know?

Now, back to the topic. Great results, gotta keep that NB/PWN temps under control.

[G H Z]

can i ask what version of it is working on 680i?

Here you go

[PcCI2iminal]

Here you go

memset for clocking?
or i miss something

[eva2000]

PcCI2iminal, what vdimm used for 445mhz 1T ?

[PcCI2iminal]

PcCI2iminal, what vdimm used for 445mhz 1T ?

here

[PcCI2iminal]

490MHZ Command Rate 1T





http://valid.x86-secret.com/show_oc?id=153356

[NiCKE^]

The BW on that one would be cool to see! Great job bro.

[eva2000]

thanks for the info but really weird you can clock 1T so high but times are slow... while i can't clock 1T that high but times seem faster



edit: doh didn't realise you're using 2x512MB not 2x1GB!

[ewitte]

[b]
Everest
5-4-4-15->46.4ns 11097Mbs
5-5-5-15->47.5ns 11010Mbs
5-6-6-15->47.5ns 11043MBs

Hmm. I must have some kind of compatability with my ram. At 424Mhz I get about 47ns and 425+ its around 75ns. Though it runs just fine above 500Mhz.

[PcCI2iminal]

great job eva2000


with some tweaks


446mhz 3-3-3-4 1T

7900GTX 740/1890mhz

[PcCI2iminal]

I get about 47ns and 425+ its around 75ns. Though it runs just fine above 500Mhz.

try booting 424(1696) and then Clockgen @ Cas 3 or 4, it's much faster

and i found something , can`t boot @ 1800mhz<->1849mhz or 2000mhz<->2039mhz

[G H Z]

Hmm. I must have some kind of compatability with my ram. At 424Mhz I get about 47ns and 425+ its around 75ns. Though it runs just fine above 500Mhz.

No thats normal, you are at the strap change point. See hipro's testing

[eva2000]

great job eva2000

ah that's more like it at least from a striker 1T vs striker 1T perspective