lol.
well i got a 144 CACJE 0604APMW
seems like a dud overclocker.
2.7 (9x300) @ 1.55 prime stable.
.sigh. 1 week difference... such varying overclockability
lol.
well i got a 144 CACJE 0604APMW
seems like a dud overclocker.
2.7 (9x300) @ 1.55 prime stable.
.sigh. 1 week difference... such varying overclockability
I picked up a CACJE 0604CPAW 146.....running 3.0GHZ for 20+ hrs prime so far at 1.53v on DFI Expert and Big Typhoon cooler.
nice work and very nice chip, its look like the 06XX chip are great![]()
Asus P5-E X38 Intel QX9650 INOO3D 9800 Gx2 4x Super Talent's T800UX2GC4
Creative X-Fi Raid 0 Raptors 36Gb data 1Tb Seasonic M12 700w
Dell 2407WFP Lian-Li Pc-65 mod Custom Built Phase Change Unit |Logitech G25|
RIG#2: DFI LANPARTY LT X48-T2R|Q9550| INOO3D 9800GTX|
2xCellshok 1000| PC Power and cooling 750w Thermaltake v1
Wife: DFI LANPARTY UT P35-T2R|Q930|BFG 8800GTS 512MB|
Samsung ddrII 667| PC Power and cooling 610eps12v Thermaltake v1
Htpc:Dfi Sli-Dr Venus|3700+|2x1gb Team Group ddr500|Thermaltake Mozart TX
i disagree, if your looking for air/water (a large majority), the coldbugged mem controllers work very well.Originally Posted by Fixxxer
I just got a CACJE 0603 from AMD on an RMA, not as good as my CAB2E 0540.
One thing I noticed about the CACJE chips (I've had a 0545 before too) is that they lock up when they are not stable, the CAB2E would just give an error or restart.
CACJE also cold bugged at about 10C which is worse than the CAB2E
I've read that people are saying that the IHS contact is good on 06 chips. Disregarding that, I popped the top of my CACJE 0603FPMW, cleaned the paste up, applied AS5 and glued her back on. I'd say it was worth it so far.
Temps:
VCore:
Don't quite understand why my VCore is fluctuating now though![]()
Last edited by dz`; 03-11-2006 at 05:39 PM.
DFI LP DK P45-T2RS+ | E8400 E0 @ 4.5GHz (Stabilizing) | TRUE-120 | 4x2GB G.Skill DDR2-1000 | HD4890 | GameXstream 600W
Biostar TF560-A2+ | X2 4200+ @ 3.2GHz | Tuniq Tower | 2x1GB DDR2-800 Value | 8800GT w/VF900 | Sparkle 400W
CACJE 0601GPAW also here.
Tested with stock air @ 2.75GHz / 1.41V.
It is running too hot there 55 C ~full load.
So IHS is bad & Opteron too are hot.
I cannot test any further.
http://img474.imageshack.us/my.php?image=10x2759qq.jpg
E8400 TRUE120@Asus Maximus Formula@2x2GB Geil Evo One 800MHz 4-4-4@Corsair HX 620W
Sapphire HD6850 1GB@Samsung 830 128GB@Casetek 1022-5@LG 19" 1970HQ
Creative Inspire 5.1 5100@Samsung SH-S203B SA@CM Quickfire Pro Red@Logitech G-600
How stable is this?Originally Posted by vanquish
^^ Very unstable, gets too hot down here, room temps are 34C
Seems like that... Its getting too, too bloody hot. Really need to get myself a WC kit soon...:|Originally Posted by Spyrus
E6600 (L631A @ 3.2G / Ultra-120) | P5B Deluxe WiFi-AP (0711 BIOS) | 7800GT (450/1.1G)
mine is running 3.15 ghz with 1.6v at 35c load.
i think ihs removal would be nice as im getting a 15c delta between idle and load.
but im not doing that until im done playing with BH-5![]()
^^ Stable ?? Water/Air, with/without IHS ??Originally Posted by Revv23
E6600 (L631A @ 3.2G / Ultra-120) | P5B Deluxe WiFi-AP (0711 BIOS) | 7800GT (450/1.1G)
My 0603 CAJE is doing great on the mem controller side. Does 300mhz no problem and I got it to my TCCD's max of 307mhz.
http://www.xtremesystems.org/forums/...ad.php?t=93993
I picked up a 146 CACJE 0603FPMW the first of March. It will do Super pi @ 3.1g but I don't take super pi as stable.
I have it prime95 stable for 8 hrs @ 2.97g with the 180 divider on a Ultra-d
I have had it @ 3.05g but I don't like my temps @ that setting and I didn't complete the prime, but I think (big if) it would have completed 8 hrs. It got up to 51c with 1.584v and that's a little hot for me.
But at 1.44v I'm sitting @ 30c right now.
I run it @ 2.88g @ 1.44v - prime95 stable for 8 hrs.
Here's the entries @ DFI Street in the OC Database where you must at least post with this and a few more benches to prove your stable.
2.97
http://www.dfi-street.com/forum/show...&postcount=170
2.88
http://www.dfi-street.com/forum/show...&postcount=174
Last edited by petercintn; 04-13-2006 at 06:20 PM.
My Rig
PC Power & Cooling 750--- MSI GD65--- Xeon x3440 - 20x180 +Turbo @ 1.35v--- EVGA 8800GTX @ Stock
4g G-Skill @ 900 7-8-7-24 / 2-10 ratio
1tb Samsung--- 2x 320g Maxtor--- 500g Seagate
Auzentech X-fi 7.1--- Altec Lansing 251
Triplel rad--- Apogee GTZ
28" Hanns-g LCD
Any result from 144 CACJE 0606 ? Does anyone have it ?
DFI nF4 Ultra-D R.AD0 ~ Bios 510-2FIX | DFI nF4 Expert R.A02 ~ Bios 704-2BT
Opteron 148 + TR XP-120 ~ 2900MHz@1.52v | Venice 3200+ ~ 2500MHz@1.376v
GSkill GBFX 2x512MB trcd=3 trcd=4
GSkill GBGH 2x512MB 244MHz 2-2-2-5 1T@3.22v (windows)
GeIL ONE-S TCCD 2x512MB ~ 264MHz 2.5-3-3-7@2.54v (windows) ~ 303MHz 2.5-4-3-7@2.76v (windows)
GeIL ONE-S BH-5 2x512MB ~ 244MHz 2-2-2-5@3.22v (windows)
Leadtek PX6600GT TDH 128MB | ViewSonic VX724 | 1x74GB WD Raptor SATA | 2x250GB Hitachi Desktar T7K250 SATA II - Raid0 | TDK CyClone CD-R/RW DVD Combo 52/32/52/16 | BenQ 1640 | CM Stacker STC-T01-UWK | Enermax Coolergiant EG-701AX-VH | WindowsXP SP2
Hmm... nobody :P
E6600 (L631A @ 3.2G / Ultra-120) | P5B Deluxe WiFi-AP (0711 BIOS) | 7800GT (450/1.1G)
Couldn't open the pics, i got a 148 CACJE 0544 EPAW yesterday, and my biggest problem is that the CPU it's WAAAAAAAAYYYYYYY HOT ! I have a XP90c + VanTec Tornado 92mm, and @ 1.36v in CPU-Z it goes to 43º in full load...
Does 2906Mhz @ 1.36v (Default is 1.4) and 3050Mhz @ 1.475... My biggest problem is the temps...
3DMark01 / CPU-Z Suicide Shot / Super_Pi 32Mb / DFI Max HTT (Still Testing) / F.E.A.R Bench / 3DMark05 DFI LanParty UT nF4 Ultra-D / Venice 3000+ @ 2700Mhz / Mushkin LVL2 BH-5 / XFX 6800GS xXx
you are complaining about those temps? My dud 148 max temp is 56c in prime95 2.75ghz @ 1.5v. Still ran blend and Large TFFT for 11 hours till i stopped it.
What chip did you have before? A +3000 Venice??Originally Posted by God_Lx
Those temps are excellent for an air cooled opteron.
Just got mine... I will put it to my dfi .
I have a ss in a case with small compressor (1/6).... I will post later...
CACJE 0603FPMW
hi, i have the oportunity to buy a cheap opteron150 with this step:
OSA150DAA5BN
CACJE 0603CPMW
I want to know if it will overclock as good as my opty146 cabye 540 (it do 3ghz with 1.5v)
I need your help!!
very thanks
real life
Bookmarks