MMM
    X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 22 of 23 FirstFirst ... 121920212223 LastLast
Results 526 to 550 of 567

Thread: ASUS Z87 Motherboards - Overview, Guides and Official Support

  1. #526
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,601
    Quote Originally Posted by tool_462 View Post
    Nice, I'll give that one a shot.
    Only use that one if you have a damaged cpu, no need for it unless you are sticking at 71, 78 etc . . . as it boots only single core.
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  2. #527
    Xtreme Addict
    Join Date
    Mar 2008
    Location
    Minnesota
    Posts
    1,620
    Quote Originally Posted by l0ud_sil3nc3 View Post
    Only use that one if you have a damaged cpu, no need for it unless you are sticking at 71, 78 etc . . . as it boots only single core.

    I noticed

    My board is still behaving oddly. Doesn't save my Boot preferences, even when everything but my boot drive is disabled it still gets screwy and tries to boot DVD drive etc.

    Prime/Linx stable settings sometimes won't boot, basically nothing will run 1T no matter clocks/volts on anything. Tried 3 different kits now.
    i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
    Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
    i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770

  3. #528
    Xtreme Addict
    Join Date
    Mar 2008
    Location
    Minnesota
    Posts
    1,620
    Would anyone be able to upload a 4.6GHz or higher profile to download or just post settings for 4770K + Impact?

    I think my board is a little flakey but I might just be noobing it up with some voltages. I haven't really OCed much since X58 days and then just a little during 2500/2600K on P67 to get a 24/7 stable clock.
    i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
    Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
    i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770

  4. #529
    Registered User
    Join Date
    Jul 2006
    Posts
    12
    Raja,

    I'm interested in picking up an Asus Z87 board, but I want to make sure I get one with a C2 stepping chipset. I have read about how the model numbers of boards with the C2 steppings now end with a 5 although according to a thread on Hardocp it seems like boards in the US may not be changing over to the new model numbers. What I'm wondering is the Z87-PRO(V EDITION) all C2 steppings since it is a fairly new board? Thank you.

  5. #530
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    As far as I am aware we have been shipping C2s on all new stock for a while (all boards). Anything not C2 is probably stock at the etailers. Should be C2 at this point really. If not you can return it, if you are affected by the USB 3.0 bug - not many people are.
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  6. #531
    Registered User
    Join Date
    Jul 2006
    Posts
    12
    I'm not quite getting the answer I would like so, let me ask the question a different way. Were any of the Z87-PRO(V EDITION) boards made with C1 stepping chipsets? In other words is there any chance if I bought that model that I could get a C1 stepping chipset? I do understand that I would be unlikely to be affected by the problem, however, since there is a fixed stepping out I want the fixed stepping. I would also really prefer to not have to return a board, but would rather just get one with a fixed stepping in the first place. Thank you.

  7. #532
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Best ask the store I think. I do not know off the top of my head what was C2 or not.
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  8. #533
    Xtreme Cruncher
    Join Date
    Feb 2007
    Location
    Benicia, CA
    Posts
    283
    Could use some help with a couple issues I'm having with my new build.
    Contains Gryphon (1603), 4770k, 4x4gb corsair vengence 1600 (at 1333 atm), Sammy 840 pro (latest firmware), xfx 7970, seasonic x650, win 8.1 x64 pro.
    No tweaking or overclocking of any sort yet (other than flashing the latest bios and installing all the drivers from Asus website.)

    1.) Machine boots to bios every time. Selecting bios boot menu (f7) and clicking the default boot device (uefi windows boot manager entry) allows it to boot up to the os.
    I've tried changing all the related settings in bios, that I'm aware of anyway, but nothing has any effect on this behavior.

    <edit 11/23> This issue was apparently related to my old alienware xtact keyboard. This device requires 2 usb connections. When I unplug the secondary usb, which only controls the lights afaik, the board boots right up to windows. Given the age of the keyboard I'd wager that the chances of anyone bothering to figure this out and fix it are approaching zero. Time to shop new keyboards.

    2.) Machine does not go to sleep. Ever. I can put it to sleep manually but it will not go to sleep by itself despite being set to do so.
    I've looked over the W8 power menu and disabled wake on scheduled task but the machine still won't sleep.

    <edit 11/23> This issue went away when I uninstalled AItweaker3.
    Had to use the venerable "unlocker" to nuke the last of it.
    No idea which section of the software package was causing the problem and I doubt I'll invest any time in figuring it out.
    I learned better than to install crap like this back in the NF7-S days but I thought perhaps it would have improved by this late date.
    Apparently not.

    It seems to be a stout board and it runs great but I have to get these basic functionality niggles straightened out if it's going to stay on my desk.
    Any suggestions welcome.

    <edit 11/23> Basic functions now working well. While my use case doesn't require it, I may even try ocing it a bit at some point.
    Because XS.
    Last edited by mezcal; 11-23-2013 at 08:30 PM. Reason: more troubleshooting results
    Currently messing with:
    Intel DP55SB Sharpsberg
    i7-860 (stock) under a Zalman CNPS-8700NT cooler
    4x4GB Corsair Vengence @ 1600
    XFX Radeon 5850 Black Edition (765, 1125 stock)
    Mushkin Chronos DX 240GB and 1.5 TB WD Black
    Powered by a Seasonic X-650 and stuffed into a Silverstone GD05 case



  9. #534
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Chicago, IL USA
    Posts
    581
    Hi All,

    My Asus Maximus VI Gene will not post past code 71. I've tried everything but a differnet CPU since I only have 1 socket 1150 CPU.

    I tried, various RAM sticks, different PSUs, reseated the CPU, placed Mobo on cardboard, new CR2032 battery, dirrent video cards, etc.

    What do you all think it is since it can only be the CPU or the Motherboard.

  10. #535
    Xtreme Addict
    Join Date
    Mar 2008
    Location
    Minnesota
    Posts
    1,620
    Quote Originally Posted by Kensek View Post
    Hi All,

    My Asus Maximus VI Gene will not post past code 71. I've tried everything but a differnet CPU since I only have 1 socket 1150 CPU.

    I tried, various RAM sticks, different PSUs, reseated the CPU, placed Mobo on cardboard, new CR2032 battery, dirrent video cards, etc.

    What do you all think it is since it can only be the CPU or the Motherboard.

    Odds are something is up with the board then, CPU's are extremely hard to kill.
    i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
    Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
    i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770

  11. #536
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    Hi guys, I need a lot help. What BIOS is the best for LN2 for M6F? I cant broken 5850 MHz with 32M and with Win7 64-bit. This chip must be 6.2-6.3 GHz (5 GHz air 2c/2t 1.44V in win7 32M), could be the issue in non right BIOS or in WIndows7 OS? XP can help me over 400 MHz?!
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  12. #537
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Chicago, IL USA
    Posts
    581
    Code 71 meant the CPU went/is bad. RMA'd with Intel and the replacement is en route and will be here tomorrow.
    Last edited by Kensek; 12-17-2013 at 08:55 AM.

  13. #538
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    Hey guys merry Xmas and Happy 2014 !!!

    I come to ask for some help before i unmount all my rig over my dimastech

    I have a M6Formula brand new a 4770K, SEASONIC X-1250W PSU, OCZ and TeamGroup SSD well all was working excellent on asrock, giga and msi boards. Today i put the M6F and at first 99 then A2 codes with the R9 270 ON...so i did all the combinations, even using rog flash, switched mem, ssd..same story...So i pulled out VGA and started working ok....Now put VGA again and i have same A2 or AE with NO SIGNAL...So took that card out put my 780HOF clear CMOS and SAME...Oh man its driving me crazy...

    Maybe i should remount CPU ? i should say that on the first start of the board i smelled like PCB burnt stuff but like comming from the RAM sockets...but it was really weird. It works all fine except that only with ONBOARD VIDEO.

    Any help i appreciatte
    Cheers !!!
    Sergio
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  14. #539
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    I tested at M6F Asus R9-270X DCII OC and it was OK. Which BIOS have you? And brand of GPU?
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  15. #540
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    thanks mate...it only works if i put a normal VGA with no PCIe current...i tested all and also remounted CPU, if i put any other normal VGA none works, not onboard, not on the VGA...wish it aint my brand new SEASONIC

    BIOS latest / MSI R9 270 Gaming and GALAXY 780HOF

    with a zotac 8400GS works...
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  16. #541
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    just changed PSU to the 1200W HOF and same thing RMA mobo i guess
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  17. #542
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    did you tried GEN2/3 manually in BIOS? Is it the same with this?
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  18. #543
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    Quote Originally Posted by FlanK3r View Post
    did you tried GEN2/3 manually in BIOS? Is it the same with this?
    i tried on AUTO, and now i went to first BIOS released and its stucked on err 19...holy Cr...

    will see if it starts with other bios but that smell at FIRST turn on is fishy...

    Thanks for your help brother !!!
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  19. #544
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    I used BIOS 0804 with R9 270x, after flash BIOS you can try change it from AUTO for GEN3.

    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  20. #545
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    Quote Originally Posted by FlanK3r View Post
    I used BIOS 0804 with R9 270x, after flash BIOS you can try change it from AUTO for GEN3.

    will do bro and let you know but for me that Smell from PCB on first turn on...RMA lets see if your method works now i get ERR CODE 19
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  21. #546
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    just tested your method and no way it gives A2 stays there, updated BIOS 804 and same thing...3 VGA R9 270 /280 and 780HOF and it ONLY works with a crappy 8400GS no PCIe feed needed, 2 NEW PSU, chip remounted...hell i hate this stuff
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  22. #547
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    well end of the story RMA...went to the distributor direct they tested and fan controller was fried...i think something else also of course...so i got a new one
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  23. #548
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    and with new is everything OK?
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  24. #549
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    Quote Originally Posted by FlanK3r View Post
    and with new is everything OK?
    will sell it bro its new in box not opened i got mad with that and tested too much Z87 guess time to test 2011

    thanks for all !!!
    Sergio
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  25. #550
    Registered User
    Join Date
    Aug 2006
    Posts
    79
    Does anyone have any suggestions about what to set the Gen3 Compatibility Mode option to (right under NB PCIe Configuration - PEG-ASPM)?

    Should it be set to Mode 1 or Mode 2?
    Asus Maximus VI Extreme Intel Z87, Intel Core i7-4770K, Corsair Dominator Platinum 16GB PC3-19200 (2400MHz), EVGA GeForce GTX TITAN SuperClocked, Samsung 840 Pro Series 128GB SSD (Windows 8.1 Pro 64)/Samsung 840 Pro Series 256GB SSD (Programs), CaseLabs Merlin SM8 with Corsair AX1200 PSU

Page 22 of 23 FirstFirst ... 121920212223 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •