very strong pssssc,what kit is that bull?
very strong pssssc,what kit is that bull?
Last edited by ZenEffect; 06-16-2013 at 10:19 AM.
Current Status - Testing & Research
^^MemtweakIt! not fully shown
what would be the fun if you got ALL the settings? there aren't too many on the OCF. ive been on haswell less than 24 hours so that should give you an idea how easy it is to get this kind of score. ive read no guides, and only made 2 slight modifications (ramdisk + maxmem) to my pi os.
here is a hint... there are a lot of 4's and 3 13's and 1 5. that covers all of my 3rds
pi is fun because its more than just timings... as I will demonstrate in my next post.
Last edited by ZenEffect; 06-16-2013 at 07:08 PM.
Current Status - Testing & Research
I've always admired this thread for being very informative for others ,about comparing different type of RAM sharing /learning from the pros -I'm pretty sure that's why it got so popular ..no hard fillings I just go with the flow
Nice score man
4GHz
ZenEffect - 7:20:641 - 40x100 - 1334.2MHz - 8-11-7-22-90-1 - ASRock Z87 OC Formula - GSkill 2133mhz 2x2GB/BBSE - 1.9v - Air CPU/Mem
in no way would I call myself pro. the 2666 tight bbse profile helped start as a baseline, then I tuned in from what it could do on ivy, then tuned in more till it was nice. tune in too far, and you lose efficiency on 3 timings. tfaw, twrwrdd, twrwrdr. tfaw is set to 20 by the profile and you should raise it to 26.
i can almost get trfc 89 to pass but it seems a little slower most likely due to bleeding edge instability. mabye if it gets cooler here in socal. ambients are a pain to work with sometimes when you have central air.
tempted to switch to sammys or some psc to see how they fare. all my stuff is all retail. no cherry picks except mabye the memory but that was pure luck of the newegg draw.
Last edited by ZenEffect; 06-16-2013 at 10:51 AM.
Current Status - Testing & Research
Fine-tuned my 5 ghz run a little,should try a new win soon ,benched this since november last year lol
Alex-Ro - 6.01.281 - 50x100 - 1400 - 9-12-12-18-108-1 - Maximus 6 Gene - Corsair platinum 2666C10@1.9V air/air.
Aida64 is a mess on this new platform, copy/read is not a good indicator of memory efficiency,had crap performance with excellent aida numbers and excellent results with crap aida numbers...
@ zen
if you want I can send you my Ney Pro (red) for a week or two ,PM meman i could use a decent memory pot right about now. 7:18's doable for sure
Last edited by XBrytanX; 06-16-2013 at 12:52 PM.
a week isnt nearly long enough. ive got a the old kpc pot that might work ok with the 2000 8-9-8 corsairs i have hanging out. it would be quite tricky to mod it all out to be a better pot for clamping on gskill heatspreaders.
Current Status - Testing & Research
Awesome run with bbse Zen
Couldn't get 2830 to run coz the board changes strap or whatever over 106 bclk but managed 2850 with lower bclk 2860 was a no go!! so figured id shoot for 2933 . Don't have adjustment for a few settings shown on memtweakit & most of the timings displayed are one out i.e set 15 in bios get 14 in mt. The other difficult thing is the timing names on mt don't correlate to my giga bios so been fudging stuff up good & proper. Anyway ended up giving 3000 a go with my dominators & they run so looks like I got some tweaking to do
1.86v air
Last edited by C-N; 06-17-2013 at 02:45 AM. Reason: Typo
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
ZenEffect - 7:20:469 - 40x100 - 1334.2MHz - 8-11-7-22-90-1 - ASRock Z87 OC Formula - GSkill 2133mhz 2x2GB/BBSE - 1.9v - Air CPU/Mem
waza harder, tighter 3rds (slightly)
2 is broke, no post. 1 passes but is slower (the 3's).
herp a derp screen shot, ment to hit motherboard tab on 3rd cpuz. aida64 shows though.
Last edited by ZenEffect; 06-16-2013 at 07:04 PM.
Current Status - Testing & Research
nice job roy!
I am working on getting some 5G today
Hey donny dan! good to see you guys. zen, how you been buddy?
I just made a prank phone call to dumo saying I was from intel claiming he was sending back bad chips. lol. Roy call me back brother!
looks like fun fellas! zen hit me up on skype sometime. keep up the good work guys!
Last edited by ZenEffect; 06-17-2013 at 04:44 PM.
Current Status - Testing & Research
probably not enough. i was walking up and can do 4.9 but no 50. cpu voltage up to 1.5 before i quit. venomous x cant keep up after that without making the fans scream like crazy.
Current Status - Testing & Research
Bookmarks