Hi all, I wanted to see if anyone seen an issue I have with an old Foxconn P45A motherboard. I had unplugged the power cord from the machine for a couple days and when I plugged/powered on, the BIOS had lost its settings. I figured the mobo battery was dead and replaced it with a new one. Problem is after I resetup the BIOS and unplugged/repluged the power cord for testing, it lost its settings again. The clear CMOS jumper is set to its default position as well. Not sure what else to look at here, is there some kind of setting in the Power Managment settings in the CMOS that would control this?