Sensor Bridge new standalone hardware monitor Plugin for LCD Smartie

[CrazyNutz]

I don't know if anyone uses the serial/USB LCD displays much, but I though I'd post my plugin I created for LCD Smartie.

Who's it for? For people that use Serial/USB LCD displays and want to monitor their hardware, and do not want to have boatload
of programs loading on startup to achieve this.

I bring you Sensor Bridge:

IMG_4340.JPG

Sensor Bridge plugin for LCD Smartie. This plugin is a standalone plugin
to gain access to an enormous amount of sensors in your PC. It is standalone because it does not need to gather
sensordata from another running program, such as speedfan, or AIDA64, etc.. It relies on the Open Hardware
Monitor Library to provide access to sensors directly. Super Clean


NOTE: AFAIK Sensor Bridge works with LCD Smartie 5.4.2.92 or newer only.

INSTALLATION:
Put the files SB.dll, OpenHarwareMonitorLib.dll, and msvcr71.dll in your LCD Smartie plugin folder.



USAGE: $dll(SB, [Hardware Type #], [Sensor #], [Format])

Hardware Type #:
1 = Mainboard (Voltages, Fan RPM's)
2 = SuperIO (Same as Mainboard)
3 = CPU (Per Core Clocks, Temps, Load, Power, etc..)
4 = RAM (Load, Used, Avaliable)
5 = GpuNvidia (Nvidia GPU Clocks, Temps, Loads, Fan)
6 = GpuAti (ATi GPU Clocks, Temps, Loads, Fan)
7 = TBalancer (Whatever the Tbalacer has Temps, Flow meter, etc.)
8 = Heatmaster (Stuff?)
9 = HDD (Load, used space, Remaining Life, Host writes, temps)

Sensor #:
Is the sensor index number you'll need to fish around a bit to find the one you looking for.

Format:
Is the formatting of the output. "0.0" would output the sensor value with a single digit of precision i.e 1.1, or 450.9. "0.00" would
have two digits of precision i.e. 1.13 or 450.93. "0" would have no precision i.e 1, or 450.



EXAMPLES:

Get Nvidia GPU Core temp $dll(SB,5,0,0.0) outputs "30.0" (or whatever your actual temp is)
The format "0.0" determins how the output is displayed. It uses the C# ToString Format

Another usfull feature is to display the sensor name. You do this by subsituting the word "name" in the format field:
$dll(SB,5,0,name) outputs "GPU Core Temperature"

And last but not least you can run Open Hardware Monitor (http://openhardwaremonitor.org/) to see what sensors are
availiable. Since Sensor Bridge uses the OpenHardwareMonitorLib.dll you have access to all the sensors you have with
the Open Harware Monitor program.


Thats all. I hope you may find it usfull. Your feedback is welcome, if you use it and find a bug, or need a feature added let me know.

Download:
SensorBridge0.6.zip
You probably need this so unzip it and drop it in the plugin folder too.
msvcr71.zip

[CrazyNutz]

New update 0.6.

Added a sensor report. This will create a file "SBReport.txt" in the plugins dir. The file contains a report of all sensors found, and include the LCD Smartie Command that you can cut and paste into LCD Smartie for each sensor you want to use.

Should make setting up your screens much simpler.

Sample Output from SBReport.txt

Sensors Found


SuperIO: 
    Sensor00: CPU VCore Voltage: 1.35
    Command : $dll(SB,2,0,0.00)

    Sensor01: Voltage #2 Voltage: 1.75
    Command : $dll(SB,2,1,0.00)

    Sensor02: AVCC Voltage: 3.31
    Command : $dll(SB,2,2,0.00)

    Sensor03: 3VCC Voltage: 3.33
    Command : $dll(SB,2,3,0.00)

    Sensor04: Voltage #5 Voltage: 1.33
    Command : $dll(SB,2,4,0.00)

    Sensor05: Voltage #6 Voltage: 1.68
    Command : $dll(SB,2,5,0.00)

    Sensor06: Voltage #7 Voltage: 1.36
    Command : $dll(SB,2,6,0.00)

    Sensor07: 3VSB Voltage: 3.33
    Command : $dll(SB,2,7,0.00)

    Sensor08: Auxiliary Temperature: 121.50
    Command : $dll(SB,2,8,0.00)

    Sensor09: System Temperature: 34.00
    Command : $dll(SB,2,9,0.00)

    Sensor10: System Fan Fan: 1834.24
    Command : $dll(SB,2,10,0.00)

    Sensor11: CPU Fan Fan: 4299.36
    Command : $dll(SB,2,11,0.00)

    Sensor12: Auxiliary Fan #2 Fan: 225000.00
    Command : $dll(SB,2,12,0.00)



CPU: 
    Sensor00: CPU Core #1 Load: 0.00
    Command : $dll(SB,3,0,0.00)

    Sensor01: CPU Core #2 Load: 0.00
    Command : $dll(SB,3,1,0.00)

    Sensor02: CPU Core #3 Load: 0.00
    Command : $dll(SB,3,2,0.00)

    Sensor03: CPU Core #4 Load: 0.00
    Command : $dll(SB,3,3,0.00)

    Sensor04: CPU Total Load: 0.00
    Command : $dll(SB,3,4,0.00)

    Sensor05: CPU Core #1 Temperature: 37.00
    Command : $dll(SB,3,5,0.00)

    Sensor06: CPU Core #2 Temperature: 40.00
    Command : $dll(SB,3,6,0.00)

    Sensor07: CPU Core #3 Temperature: 38.00
    Command : $dll(SB,3,7,0.00)

    Sensor08: CPU Core #4 Temperature: 38.00
    Command : $dll(SB,3,8,0.00)

    Sensor09: CPU Core #1 Clock: 2467.73
    Command : $dll(SB,3,9,0.00)

    Sensor10: CPU Core #2 Clock: 2467.73
    Command : $dll(SB,3,10,0.00)

    Sensor11: CPU Core #3 Clock: 2467.73
    Command : $dll(SB,3,11,0.00)

    Sensor12: CPU Core #4 Clock: 2467.73
    Command : $dll(SB,3,12,0.00)

    Sensor13: Bus Speed Clock: 411.29
    Command : $dll(SB,3,13,0.00)



RAM: 
    Sensor00: Memory Load: 42.67
    Command : $dll(SB,4,0,0.00)

    Sensor01: Used Memory Data: 1.71
    Command : $dll(SB,4,1,0.00)

    Sensor02: Available Memory Data: 2.29
    Command : $dll(SB,4,2,0.00)



GpuNvidia: 
    Sensor00: GPU Core Temperature: 31.00
    Command : $dll(SB,5,0,0.00)

    Sensor01: GPU Core Clock: 50.63
    Command : $dll(SB,5,1,0.00)

    Sensor02: GPU Memory Clock: 135.00
    Command : $dll(SB,5,2,0.00)

    Sensor03: GPU Shader Clock: 101.25
    Command : $dll(SB,5,3,0.00)

    Sensor04: GPU Core Load: 5.00
    Command : $dll(SB,5,4,0.00)

    Sensor05: GPU Memory Controller Load: 5.00
    Command : $dll(SB,5,5,0.00)

    Sensor06: GPU Video Engine Load: 0.00
    Command : $dll(SB,5,6,0.00)

    Sensor07: GPU Fan Control: 37.00
    Command : $dll(SB,5,7,0.00)

    Sensor08: GPU Memory Load: 9.70
    Command : $dll(SB,5,8,0.00)



GpuAti: 


TBalancer: 


Heatmaster: 


HDD: 
    Sensor00: Host Writes Data: 1545.53
    Command : $dll(SB,9,0,0.00)

    Sensor01: Remaining Life Level: 100.00
    Command : $dll(SB,9,1,0.00)

    Sensor02: Used Space Load: 70.87
    Command : $dll(SB,9,2,0.00)

[CrazyNutz]

UPDATE: You must run LCD Smartie as administrator (or disable UAC) to gain access to all of the available sensors.

[max1024]

can't download this plugin, why?

[CrazyNutz]

Try here:
http://forums.lcdsmartie.org/viewtop...p=19146#p19146

[xSPARExSTEWX]

Link is broken again. I would love to download this as I can not get any other plugins to work for CPU temp.