Page 10 of 20 FirstFirst ... 78910111213 ... LastLast
Results 226 to 250 of 486

Thread: New Crucial 1.5V DDR3 Kits

  1. #226
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    338
    Sounds a lot like performance level from older platforms.

    OT: How do you think Ivy compares to Sandy with SS?
    Heatware Cecil

  2. #227
    Xtreme Mentor
    Join Date
    Dec 2007
    Posts
    2,507
    Ivy needs a LOT more cold to get the maximum mhz, I am maxed at 5.5 for any benching on IB. I used chilled water for SB, you could pretty much max out the chip with just a decent water setup.

    Not sure I want to try colder, maybe dry ice, but I hate to have to buy a dewar.

    You can see a big difference in the Cache and Memory bench in AIDA64 by lowering the LB setting, I guess maybe it is kind of like PL. I saved a few screens but Im back on my laptop now.
    Last edited by OC Nub; 04-29-2012 at 05:54 PM.

  3. #228
    Aussie God
    Join Date
    Feb 2005
    Location
    Copenhagen, Denmark
    Posts
    4,596
    Spotted something, bought a kit of ram, hoping it was Samsung IC.... PC12800 CL11 1.5v Trendscend JETram, same IC... Micron D9PFJ.
    Competition ranking;
    2005; Netbyte, Karise/Denmark #1 @ PiFast
    2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
    2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
    2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)

    Spectating;
    2010; GOOC 2010 Many thanks to Gigabyte!


  4. #229
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Athens -> Hellas
    Posts
    944
    Tested yet ????

  5. #230
    Aussie God
    Join Date
    Feb 2005
    Location
    Copenhagen, Denmark
    Posts
    4,596
    Quote Originally Posted by felix_w View Post
    Tested yet ????
    Will do soon, but my board at hand is really useless for testing.... I dont believe the Ivy IMC is THAT weak as what I hit now... Motherboard MIGHT be here tomorrow....
    Might be next week..

    I got a none OC board at hand
    GA-Z77MX-D3H
    Competition ranking;
    2005; Netbyte, Karise/Denmark #1 @ PiFast
    2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
    2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
    2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)

    Spectating;
    2010; GOOC 2010 Many thanks to Gigabyte!


  6. #231
    Aussie God
    Join Date
    Feb 2005
    Location
    Copenhagen, Denmark
    Posts
    4,596
    I really wish I could stand strong, and with a lifted voice say "what a bargain" about those Transcend JETram with same IC... But the thing is, they are the worst DDR3 sticks I've ever tried.... They replaced Vengeance on being most useless sticks..
    Competition ranking;
    2005; Netbyte, Karise/Denmark #1 @ PiFast
    2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
    2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
    2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)

    Spectating;
    2010; GOOC 2010 Many thanks to Gigabyte!


  7. #232
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    338
    Holy smokes batman! Put the 2x2 Ballistix in, set to 10-10-10-30-3T with 1.75V just to see if it would at least post 2400Mhz, and it does


    Spi1m passed, but 4m failed. Changed timings to 10-12-12-28-2T and lowered Vdimm to 1.7V and it passed 4m. About to start 32m.

    Ballistix 2x2 2400.JPG
    Ballistix 2x2 2400 pi4m.JPG
    Last edited by Cecil; 05-24-2012 at 03:33 PM.
    Heatware Cecil

  8. #233
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    338
    2x4GB Smart Tracer kit at 2400Mhz 10-10-10
    Smart Tracer 2400 101010 Spi1m.JPG
    Heatware Cecil

  9. #234
    Xtreme Mentor
    Join Date
    Dec 2007
    Posts
    2,507
    ^ Much better timings! My Ballistix Elite will not boot at 2400 10-10-10

  10. #235
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    338
    What vdimm? I was using 1.75v.
    Heatware Cecil

  11. #236
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    this kits i bought 2 of the elite are the worst i ever hard they where stable on hour then no more then yes horrible

    i sold them both even my patriots (see my thread) do magic for 58 dollars
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  12. #237
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    338
    Quote Originally Posted by andressergio View Post
    this kits i bought 2 of the elite are the worst i ever hard they where stable on hour then no more then yes horrible

    i sold them both even my patriots (see my thread) do magic for 58 dollars
    I have four of the 2x4GB Smart Tracer 1866s, and a set of the 2x2GB Elites, and a friend of mine has three kits of the 2x4GB Smart Tracer 1866s. Every single one of them will do 2200Mhz 9-9-9 stable on AMD, and 2133Mhz on Intel (because of tRC).

    All of mine will do 2400Mhz 10-10-10 for Spi 1m as well. The 30nm Samsungs I got wont do 2400Mhz if their life depended on it, and best they do for me is 2275Mhz 10-11-11.
    Heatware Cecil

  13. #238
    Xtreme Enthusiast
    Join Date
    Apr 2006
    Location
    Bulgaria
    Posts
    544
    Mine (Tactical 1866) do 2200 9-9-9 stable (probably could do more) on Bulldozer and 2000 8-8-8 on Thuban.
    X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
    EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red

  14. #239
    Xtreme Addict
    Join Date
    May 2008
    Location
    Decatur, GA
    Posts
    1,532
    I bought two of the Tactical 2x4GB 1600 C9 kits, haven't installed them yet but just curious what I can reasonably expect with a 3820 and Asus P9X79 WS.
    i7 4930K
    32GB Corsair Vengeance Pro DDR3-2400C10
    Asus Rampage IV Black Edition
    2x GeForce GTX 780
    Corsair AX1200
    Cooler Master HAF-X
    Dell U3011

  15. #240
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Uruguay
    Posts
    188
    Quote Originally Posted by Shiranui Gen-An View Post
    I bought two of the Tactical 2x4GB 1600 C9 kits, haven't installed them yet but just curious what I can reasonably expect with a 3820 and Asus P9X79 WS.
    2133-2200 9-9-9 @ 1.6x, 1866 8-8-8 @ 1.5x. Some people reported problems of stability with some Intel platforms. You'll need some luck.

  16. #241
    Registered User
    Join Date
    Nov 2008
    Posts
    12
    4x4gb Tactical Tracer BLT2CP4G3D1869DT2TXRGCEU @2200 9-9-9-21-107 1.625v



    works fine for me
    stable since 10 weeks.

    not tested 2400 yet.

    regards ice
    Last edited by icewaere; 06-06-2012 at 07:33 PM.
    --> Ivy i5-3570K @ 4.500MHz 1,25v <--
    --> 4x 4GB Crucial Ballistix Tactical Tracer 2200 Cl9 1,625v <--
    --> PNY GeForce 560Ti GTX OC-Edition @ 900MHz*2300MHz vMod 1,0v <--
    --> MSI Z77A-GD65 Rev2.1 <--
    --> 1x Crucial 128gb M4 <--
    --> Seasonic X-560 <--

  17. #242
    Registered User
    Join Date
    May 2002
    Location
    Salem, OR
    Posts
    15
    What would you guys recommend for a safe 24/7 voltage? Im running around 1.65v to 1.67v with motherboard overvolt. Thanks, Adam
    2500k@ 4.8ghz 1.375v
    Asus Maximus IV Extreme
    8GB G. Skill Trident 2400 @ 1066mhz 9-10-11-21-1T 1.55V
    H100<--big boy watercooling coming soon
    MSI GTX 560ti 448 in SLI
    80gb Intel SSD, 1TB WD Black
    850W Silverstone
    Corsair 800D

  18. #243
    Registered User
    Join Date
    Jul 2006
    Posts
    8
    I have decided to buy Crucial memory kit, what I can see from their website they have Elite, Sport, Tracer and Tactical. What is the difference between these? Is PC1600 or PC1866 kits to prefer? Doesn't seem to be to big price difference.

  19. #244
    Registered User
    Join Date
    May 2002
    Location
    Salem, OR
    Posts
    15
    The Elite has big black heatspreaders guess it out be the top of the line, the Sport bottom rung, Tracer or Smart Tracer i believe the older 1.65v stuff. and the Tactical Tracer is the the new 1.5v with the leds. Smart Tracer has leds also. I have 4x4gb of the 1600 Tactical Tracer running 2000mhz@1.65v timing is 9-9-9-27-2T but i am still working on that. But i am running a Amd 1100t and I dont feel my imc is all that strong. I think most of the new 1.5v stuff overclocks about the same, with the exception of the Sport. But I have only tested my current 4 sticks. Hope this helps, Adam
    2500k@ 4.8ghz 1.375v
    Asus Maximus IV Extreme
    8GB G. Skill Trident 2400 @ 1066mhz 9-10-11-21-1T 1.55V
    H100<--big boy watercooling coming soon
    MSI GTX 560ti 448 in SLI
    80gb Intel SSD, 1TB WD Black
    850W Silverstone
    Corsair 800D

  20. #245
    Registered User
    Join Date
    Jul 2006
    Posts
    8
    Quote Originally Posted by Hotrodsun View Post
    The Elite has big black heatspreaders guess it out be the top of the line, the Sport bottom rung, Tracer or Smart Tracer i believe the older 1.65v stuff. and the Tactical Tracer is the the new 1.5v with the leds. Smart Tracer has leds also. I have 4x4gb of the 1600 Tactical Tracer running 2000mhz@1.65v timing is 9-9-9-27-2T but i am still working on that. But i am running a Amd 1100t and I dont feel my imc is all that strong. I think most of the new 1.5v stuff overclocks about the same, with the exception of the Sport. But I have only tested my current 4 sticks. Hope this helps, Adam
    So if i understand it right I would have best luck most likely with the Elite, Smart Tracer or Tactical Tracer?
    Is PC1866 Mhz modules to prefer before PC1600 modules or will they perform similar?

  21. #246
    Registered User
    Join Date
    May 2002
    Location
    Salem, OR
    Posts
    15
    I would say the smart or the tactical, the PC1866 I would figured be binned a bit better. Maybe someone else while chime in with a recommendation also.
    2500k@ 4.8ghz 1.375v
    Asus Maximus IV Extreme
    8GB G. Skill Trident 2400 @ 1066mhz 9-10-11-21-1T 1.55V
    H100<--big boy watercooling coming soon
    MSI GTX 560ti 448 in SLI
    80gb Intel SSD, 1TB WD Black
    850W Silverstone
    Corsair 800D

  22. #247
    Xtreme Addict
    Join Date
    May 2008
    Location
    Decatur, GA
    Posts
    1,532
    These sticks are pretty fun to play with for sub-1200MHz clocking with tight timings. I have two of the Ballistix Tactical DDR3-1600 C8 2x4GB kits that were about $37 each on sale a Fry's a few weeks back.

    43x103BCLK_Ballistix_1100C9_AIDA64BW.jpg
    Last edited by Shiranui Gen-An; 07-08-2012 at 03:28 PM.
    i7 4930K
    32GB Corsair Vengeance Pro DDR3-2400C10
    Asus Rampage IV Black Edition
    2x GeForce GTX 780
    Corsair AX1200
    Cooler Master HAF-X
    Dell U3011

  23. #248
    Xtreme Cruncher
    Join Date
    Aug 2009
    Location
    Huntsville, AL
    Posts
    671
    Not sure if it's been posted, but don't expect the tracer to light up on x79. They don't work - get the ones with the tall heatsink. I bought the 4xddr3-1866 4gb tactical tracers and am happy with them. I popped them in and keyed in 2133 9-9-9-27-1T-1.69V. One day I'll see what else I can do with them. It kills me that the lights and probe doesn't work though.
    upgrading...

  24. #249
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    338
    Quote Originally Posted by meanmoe View Post
    Not sure if it's been posted, but don't expect the tracer to light up on x79. They don't work - get the ones with the tall heatsink. I bought the 4xddr3-1866 4gb tactical tracers and am happy with them. I popped them in and keyed in 2133 9-9-9-27-1T-1.69V. One day I'll see what else I can do with them. It kills me that the lights and probe doesn't work though.
    You just have a defective set. Out of the four kits I have, I got one that wouldnt light up. If you got them from newegg, they will take them back and refund or exchange. If not, Crucial will exchange them hassle free.
    Heatware Cecil

  25. #250
    Xtreme Cruncher
    Join Date
    Aug 2009
    Location
    Huntsville, AL
    Posts
    671
    Yours lights up on x79?

    There's also this: http://forum.crucial.com/t5/Ballisti...X79/td-p/89812

    I would've returned them, but I would hate to get a lesser performing kit. And I did buy them on newegg.
    upgrading...

Page 10 of 20 FirstFirst ... 78910111213 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •