I've been reading and testing methods I read about all over the internet. Bridging VID3 to VCC, VID4 to VCC, VID5 to VCC. All of which don't work at all. My voltages and heat have not changed. The laptop boots up fine every time. It's a gateway M-6827 using the Intel mobile 965 chipset and an Intel core 2 duo t5750 @ 2.0Ghz. It runs 0.950V at idle stock and 1.25V at 2.0Ghz stock. Rmclock doesn't seem to change anything or work at all. I think it's a windows 7 thing. Usually RMClock works great in windows XP. Anyway what pins do i bridge to get down to 0.750V at minimum frequency and say a 1.1V at 2.0Ghz? I've test 1.1V at 2.0ghz which was stable. Anyway help would be appreciated. I've removed this cpu like 20 times now modding pins with no effect. I did do the bsel mod from 166 to 200 which worked and the bios deteted it as a 2.4Ghz processor. However in windows it's locked to x6 multiplier.

THANKS!