10.8 wont install

[zanzabar]

i get this

i have a 4890 and im on server08r2 data center edition(aka windows7 server), and yes i need server.

[ChaosAD]

After all the known process of uninstall preivious drivers, rebooting, running driver cleaner etc?

[zanzabar]

After all the known process of uninstall preivious drivers, rebooting, running driver cleaner etc?

tried that, and even went to an image pre installing drivers (i just redid my windows 2 days ago), odiously that dose not say that the driver is up to date it just has nothing there

[bill_d]

tried that, and even went to an image pre installing drivers (i just redid my windows 2 days ago), odiously that dose not say that the driver is up to date it just has nothing there

if you just reloaded windows do you have all the basic crap reload too

all updates
did all the netframeworks get loaded
MB files chipset elec....

will 10.7 load

[zanzabar]

if you just reloaded windows do you have all the basic crap reload too

all updates
did all the netframeworks get loaded
MB files chipset elec....

will 10.7 load

yes, that SS is on 10.7 trying to update, yes all updates, yes MB and chipset drivers are in. i tried on my admin non super admin and the super admin.

i also tried deleting all of the appdata for ati and the program data so im lost on this one, i have a reference 4890 thats HIS branded but HIS uses the ati ID so i dont see why it would not work unless the installer was broken

[wez]

Try and download it again, seems like the installer contains an older display driver... Cat 10.8 should contain version 8.762, and your installer is trying to install what seems v8.753 (?)

[B-Shot]

try using a vga cable instead of dvi cable (or adapters) its an hdmi issue on the install(was for me)

[Ket]

I had that exact problem with Cats 10.4. Never did figure out what it was doing. By that stage though I was fed up with the continuously deteriorating quality of the ATi drivers and just didn't care.

[zanzabar]

Try and download it again, seems like the installer contains an older display driver... Cat 10.8 should contain version 8.762, and your installer is trying to install what seems v8.753 (?)

i tried that

try using a vga cable instead of dvi cable (or adapters) its an hdmi issue on the install(was for me)

i assume u mean dsub and thats what i use since i have a crt, vga is any cable/plug that dose 800x600

I had that exact problem with Cats 10.4. Never did figure out what it was doing. By that stage though I was fed up with the continuously deteriorating quality of the ATi drivers and just didn't care.

yah it dosnt really matter the only problem i have with 10.7 or any others is that with HDMI it forces overscan in dx10 mode and up but since i dont play games on my tv it dose not matter

[s1nykuL]

Problem I had with 10.8 was that the drivers installed OK but CCC didn't.
My solution was to remove all ATI drivers with Driver Cleaner.net, extract the files from the Catalyst install package and install everything manually... Install drivers first using the device manager(not ATI install manager) by browsing to the new driver location:

C:\ATI\Support\10-8_xp32_dd_ccc_enu\Packages\Drivers\Display\XP_INF

and then one at a time install software components from:

C:\ATI\support\10-8_xp32_dd_ccc_enu\Packages\Apps

This is on XP32, I would imagine a similar procedure for Win7 variants would work.

[B-Shot]

i assume u mean dsub and thats what i use since i have a crt, vga is any cable/plug that dose 800x600



correct