MMM
    X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 2 of 40 FirstFirst 1234512 ... LastLast
Results 26 to 50 of 987

Thread: H20 | AMD Phenom II C3 | Dragon's Revenge | Ultimate Thread

  1. #26
    Xtreme Cruncher
    Join Date
    Apr 2008
    Location
    Ohio
    Posts
    3,112
    Quote Originally Posted by Titan7171 View Post
    well how cold?? if you are talking about cold winter air (-20-+10 then yes glycol with water at 40/60 or 50/50 ratio mix will do it.
    Thanks, wil this consistancy flow through the average water cooling kit?
    ~1~
    AMD Ryzen 9 3900X
    GigaByte X570 AORUS LITE
    Trident-Z 3200 CL14 16GB
    AMD Radeon VII
    ~2~
    AMD Ryzen ThreadRipper 2950x
    Asus Prime X399-A
    GSkill Flare-X 3200mhz, CAS14, 64GB
    AMD RX 5700 XT

  2. #27
    Xtreme Member
    Join Date
    Jul 2009
    Location
    England
    Posts
    406
    damn i just took down my bong cooler did have 4.16 prime stable for 3 hours tho. not the same story on air
    not got all the criteria but



    in the end i managed to optimize the water cooler for a load temp of 22C and idle of 16C. the ambient was 20C at the time
    4.16 was an easily achievable stable clock. (long after these shots)
    and no that isnt a serious benchmark run i was just working out some kinks. spi 32m http://hwbot.org/compare.do?resultId=919380 4.3

    on the coolermaster v8 i am having to leave it at stock volts and 3.8ghz due to stupidly high temperatures topping 60C at times which is making me uncomfortable whilst gaming and what not.
    Last edited by El Gappo; 11-16-2009 at 07:09 PM.
    My pot is bigger than your pot

    WHAU!!!!

  3. #28
    Xtreme Enthusiast
    Join Date
    Dec 2008
    Location
    Austin, Texas
    Posts
    599
    Quote Originally Posted by equinox1 View Post
    this was fun,what next?
    That was great. Cold too.

    How about Vantage?

    Colder?
    Last edited by 64NOMIS; 11-16-2009 at 07:48 PM.

  4. #29
    Xtreme Mentor
    Join Date
    Dec 2007
    Location
    State of Confusion, USA
    Posts
    2,513
    First off, all I can say is WOW, Best AMD chip ever!!
    I even like it better than my Opty 185...

    Here are my air results using a Xigmatek S-1283 with a Scythe Ulta Kaze 3000 fan. To be fair it was a little cooler here tonight so I did open the window near the computer.
    You can see ambients in the center pic...

    Down to the nittygritty, here are some system Pics (I accidentally took them at too High res, so I'll just put clickable thumbs):







    Here are my 30 minute Prime Stable screenies.. 4027 CPU / 2416 IMC @ 1.475v.

    UNDER LOAD:


    AFTER COOLDOWN (5 minutes):


    Keep in mind I've only had a few hours with this chip, so things can only get better...

    I'll put this puppy under water soon and see what it can really do! It still seems to exibit the same temp limitations of the C2's (~55c), but it gets MUCH higher clocks at lower voltages... SWEET!

    BTW: equinox1 , quit being a wimp....
    I beat your stock water on the core and IMC with AIR. At this rate your ICE Dragon may be in trouble when I hook up the Ugly Water...
    AMD FX-8350 (1237 PGN) | Asus Crosshair V Formula (bios 1703) | G.Skill 2133 CL9 @ 2230 9-11-10 | Sapphire HD 6870 | Samsung 830 128Gb SSD / 2 WD 1Tb Black SATA3 storage | Corsair TX750 PSU
    Watercooled ST 120.3 & TC 120.1 / MCP35X XSPC Top / Apogee HD Block | WIN7 64 Bit HP | Corsair 800D Obsidian Case








    First Computer: Commodore Vic 20 (circa 1981).

  5. #30
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,797
    nice Dave, one of the many with classic PC complete in case and aircooling !
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  6. #31
    NooB MOD
    Join Date
    Jan 2006
    Location
    South Africa
    Posts
    5,804
    @ OP, how do you get Fan Control and Smart Profiles in AOD? I have 3.0.2 but those tabs aren't showing.
    Xtreme SUPERCOMPUTER
    Nov 1 - Nov 8 Join Now!


    Quote Originally Posted by Jowy Atreides View Post
    Intel is about to get athlon'd
    Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v

  7. #32
    Xtreme Addict
    Join Date
    May 2004
    Location
    Aland Islands, Finland
    Posts
    1,139
    Quote Originally Posted by charged3800z24 View Post
    Thanks, wil this consistancy flow through the average water cooling kit?

    Distilled water mixed with Glycol works great for water-cooling. Keeps corrosion and algae to a minimal as well as cold resistant
    You’ll find instructions on the correct way to mix it on the bottle most of the time, to get the most effective mixture.
    Asus Crosshair IV Extreme
    AMD FX-8350
    AMD ref. HD 6950 2Gb x 2
    4x4Gb HyperX T1
    Corsair AX1200
    3 x Alphacool triple, 2 x Alphacool ATXP 6970/50, EK D5 dual top, EK Supreme HF

  8. #33
    Xtreme Member
    Join Date
    Sep 2008
    Location
    madison wis.
    Posts
    177
    just stretching my wings there Daveburt. plenty more left in the tank.
    amd FX8120
    asus sabertooth 990fx
    6970 amd
    corsair dominator gt 2000 4 gig
    2x 74 gig raptors raid 0
    pcpower 1200 watt

  9. #34
    Xtreme Mentor
    Join Date
    Dec 2007
    Location
    State of Confusion, USA
    Posts
    2,513
    Quote Originally Posted by equinox1 View Post
    just stretching my wings there Daveburt. plenty more left in the tank.
    I was just messing with ya anyway...
    Nice scores on that chilled run!
    AMD FX-8350 (1237 PGN) | Asus Crosshair V Formula (bios 1703) | G.Skill 2133 CL9 @ 2230 9-11-10 | Sapphire HD 6870 | Samsung 830 128Gb SSD / 2 WD 1Tb Black SATA3 storage | Corsair TX750 PSU
    Watercooled ST 120.3 & TC 120.1 / MCP35X XSPC Top / Apogee HD Block | WIN7 64 Bit HP | Corsair 800D Obsidian Case








    First Computer: Commodore Vic 20 (circa 1981).

  10. #35
    Xtreme Enthusiast
    Join Date
    Dec 2008
    Location
    Austin, Texas
    Posts
    599
    Quote Originally Posted by Oj101 View Post
    @ OP, how do you get Fan Control and Smart Profiles in AOD? I have 3.0.2 but those tabs aren't showing.
    Try update to Overdrive 3.1 for Smart Profiles.

    MB Fan control doesn't work with all boards. Also, disabling Smart Fan Control in BIOS may resolve.

  11. #36
    Xtreme Enthusiast
    Join Date
    Dec 2008
    Location
    Austin, Texas
    Posts
    599
    Quote Originally Posted by equinox1 View Post
    notice aod has a bit of problem with below 0 celsius. pass that along 64nomis will you?
    equinox1,

    The CPU registers on AMD processors do not report negative values.

    AMD OverDrive also displays the motherboard sensor that reads the CPU temp value (in addition to the CPU register value). This can read sub-zero in most cases: ASUS maxes at -55C, DFI maxes at -86C

    It depends on the board design / SuperIO chip.

    AMD OverDrive 3.1 allows the board vendor to configure OverDrive such that it reads primarily from the Mobo sensor (which can read sub-zero). But if this definition is missing from the BIOS code then OverDrive just reads the default CPU temp input (CPU register or SB-TSI value).

    Hope that helps!

    Simon & Macci

  12. #37
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,797
    simon: i have problem with smart profiles . What its wrong?

    edit: CPU must be only at default clocks?

    Last edited by FlanK3r; 11-17-2009 at 08:15 AM.
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  13. #38
    Xtreme Cruncher
    Join Date
    Apr 2008
    Location
    Ohio
    Posts
    3,112
    Quote Originally Posted by wez View Post
    Distilled water mixed with Glycol works great for water-cooling. Keeps corrosion and algae to a minimal as well as cold resistant
    You’ll find instructions on the correct way to mix it on the bottle most of the time, to get the most effective mixture.
    Nice, I might give it try. Thanks guys, Titan7171 and Wez for the info. I will try my chilled water tonight if wife permits.
    My other setup will cause the waster to freeze. Also, for the first time, I am getting different clocks in xp 32 vs win7 64bit.
    My other chips were the same in both OS's. Maybe my water setup will net better results.

    Quote Originally Posted by Daveburt714 View Post
    First off, all I can say is WOW, Best AMD chip ever!!
    I even like it better than my Opty 185...

    Here are my air results using a Xigmatek S-1283 with a Scythe Ulta Kaze 3000 fan. To be fair it was a little cooler here tonight so I did open the window near the computer.
    Dave, nice run on air, I will redue my air results when I have more time.
    I am looking forward to your gheto water setup.. it performs nicely.
    Last edited by charged3800z24; 11-17-2009 at 08:32 AM.
    ~1~
    AMD Ryzen 9 3900X
    GigaByte X570 AORUS LITE
    Trident-Z 3200 CL14 16GB
    AMD Radeon VII
    ~2~
    AMD Ryzen ThreadRipper 2950x
    Asus Prime X399-A
    GSkill Flare-X 3200mhz, CAS14, 64GB
    AMD RX 5700 XT

  14. #39
    Xtreme Cruncher
    Join Date
    Apr 2008
    Location
    Ohio
    Posts
    3,112

    Update!!

    I updated my post on main page (post 8)
    Not as impressive as equinox, but close. I needed my ice to bring the temps down.
    ~1~
    AMD Ryzen 9 3900X
    GigaByte X570 AORUS LITE
    Trident-Z 3200 CL14 16GB
    AMD Radeon VII
    ~2~
    AMD Ryzen ThreadRipper 2950x
    Asus Prime X399-A
    GSkill Flare-X 3200mhz, CAS14, 64GB
    AMD RX 5700 XT

  15. #40
    Xtreme Guru
    Join Date
    Jul 2004
    Location
    10009
    Posts
    3,701



    what is this vid, fid crap? This isn't like my old computer.




    biostar TA790GXA3+
    965c3 (fuzionv2/gtx480)
    4x2gb D9
    visiontek 5850
    Last edited by trans am; 11-17-2009 at 05:03 PM.

  16. #41
    Xtreme Member
    Join Date
    Sep 2008
    Location
    madison wis.
    Posts
    177
    a little more fun tonight. with a few added features. swapped out my apogee gt for a enzotech sapphire all copper block and kicked the nb to 2800+.
    heres a vantage run you wanted 64nomis,no overclock on the video cards though as i forgot to clock em up.
    idle temps were -15c about 20secs after stopping prime95,lowest temp seen so far was -22c on the asus lcd poster. again no fan speeds as there are no fans than run off the board.



    http://service.futuremark.com/compare?3dmv=1606122
    not my best vantage run , my 955 did 21649 but the 965 beat the cpu score.
    amd FX8120
    asus sabertooth 990fx
    6970 amd
    corsair dominator gt 2000 4 gig
    2x 74 gig raptors raid 0
    pcpower 1200 watt

  17. #42
    Xtreme Enthusiast
    Join Date
    Dec 2008
    Location
    Austin, Texas
    Posts
    599
    Quote Originally Posted by equinox1 View Post
    a little more fun tonight. with a few added features. swapped out my apogee gt for a enzotech sapphire all copper block and kicked the nb to 2800+.
    heres a vantage run you wanted 64nomis,no overclock on the video cards though as i forgot to clock em up.
    Cool. Very cool. Got a better shot of your chiller & bath?

    This was exactly what I needed to see this evening...excellent gentleman.

    Wouldn't it be nice if we had some shiny new GPU's for 3D?

  18. #43
    Xtreme Addict
    Join Date
    Jan 2008
    Location
    milwaukee
    Posts
    1,683
    Quote Originally Posted by 64NOMIS View Post
    Wouldn't it be nice if we had some shiny new GPU's for 3D?
    if by nice you mean effing awesome than ya it would be

    i after class tomorrow night i will finally get to do some tweaking with the c3 cant wait!
    LEO!!!!
    amd phenom II x6 1100T | gigabyte 990fxa-ud3 . .
    2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd
    sapphire ati 5850 | x-fi xtrememusic. . .
    samsung f4 2tb | samsung dvdrw . .
    corsair tx850w | windows 7 64-bit.
    ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . .
    lycosa-g9-z2300 | 26" 1920x1200 lcd .

  19. #44
    Xtreme Cruncher
    Join Date
    Apr 2008
    Location
    Ohio
    Posts
    3,112
    Quote Originally Posted by 64NOMIS View Post
    Cool. Very cool. Got a better shot of your chiller & bath?

    This was exactly what I needed to see this evening...excellent gentleman.

    Wouldn't it be nice if we had some shiny new GPU's for 3D?
    My vantage runs are pretty lame with my video card setup, I can run one if you want though. I am about 100mhz under equinox overall. Need more cold .

    BTH, those 5970's look nice
    ~1~
    AMD Ryzen 9 3900X
    GigaByte X570 AORUS LITE
    Trident-Z 3200 CL14 16GB
    AMD Radeon VII
    ~2~
    AMD Ryzen ThreadRipper 2950x
    Asus Prime X399-A
    GSkill Flare-X 3200mhz, CAS14, 64GB
    AMD RX 5700 XT

  20. #45
    Xtreme Member
    Join Date
    Sep 2009
    Posts
    192
    Anyone got a 955 C3 yet? Curious to see what they are capable of.

  21. #46
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,797
    my chip coming this or next week.
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  22. #47
    Xtreme Guru
    Join Date
    Jul 2004
    Location
    10009
    Posts
    3,701


    Im able to play games and use everything easily at 4.1GHZ at 31c.
    no chilled water yet I'm gonna try some more tonight.

    I'll do some p95 blend like the threadstarter requests.
    Are any of you getting condensation on your lines?
    NYC is a very humid city and I was wondering if you guys are having any moisture building up on your tubes?
    I have very thick walls on mine so it shouldn't be a problem.
    I think all I need to do is unscrew my radbox and fans and lay the rad down in the sink filled with water and lots of ice.
    I chose my apt with overclocking in mind.
    Last edited by trans am; 11-18-2009 at 02:13 PM.

  23. #48
    Xtreme Cruncher
    Join Date
    Apr 2008
    Location
    Ohio
    Posts
    3,112
    Quote Originally Posted by trans am View Post
    Are any of you getting condensation on your lines?
    NYC is a very humid city and I was wondering if you guys are having any moisture building up on your tubes?
    I have very thick walls on mine so it shouldn't be a problem.
    I think all I need to do is unscrew my radbox and fans and lay the rad down in the sink filled with water and lots of ice.
    I chose my apt with overclocking in mind.
    I have base board heat and it is very dry in here.
    I still haven't iced down my setup, which will bring on the moisture to the lines.
    I am still debating which way to go for the best chilled water setup. I want something more on the lines of 24/7.

    Simon
    These chips are awsome. I can boot and run flawless @ 4.2ghz on my water setup.
    I can bench 3d @ 4.3ghz and light benches @ 4.4ghz.
    I will update my results this weekend if I can get the temps down more. Great thread as always.
    Last edited by charged3800z24; 11-18-2009 at 04:14 PM.
    ~1~
    AMD Ryzen 9 3900X
    GigaByte X570 AORUS LITE
    Trident-Z 3200 CL14 16GB
    AMD Radeon VII
    ~2~
    AMD Ryzen ThreadRipper 2950x
    Asus Prime X399-A
    GSkill Flare-X 3200mhz, CAS14, 64GB
    AMD RX 5700 XT

  24. #49
    Registered User
    Join Date
    Nov 2009
    Posts
    4

    Air Results coming soon

    Hey, Im new here. Im a friend of Charged3800z24 and i just bought a Phenom II 965BE C3. I got 3.8 GHz at stock voltage, bumped up the voltage and was able get 4.0GHz on ambient air! This is an awsome chip!



    Last edited by Dewordie; 11-19-2009 at 05:38 PM. Reason: adding overclocking results
    *Phenom II 965BE C3
    *Swiftech Apogee XT
    *Asus Sabertooth 990FX
    *Gskill RipjawX 8GB DDR3
    *Gigabyte HD5770 x2
    *Corsair 1050W

  25. #50
    Xtreme Guru
    Join Date
    Jul 2004
    Location
    10009
    Posts
    3,701
    Quote Originally Posted by charged3800z24 View Post
    I have base board heat and it is very dry in here.
    I still haven't iced down my setup, which will bring on the moisture to the lines.
    I am still debating which way to go for the best chilled water setup. I want something more on the lines of 24/7.

    Simon
    These chips are awsome. I can boot and run flawless @ 4.2ghz on my water setup.
    I can bench 3d @ 4.3ghz and light benches @ 4.4ghz.
    I will update my results this weekend if I can get the temps down more. Great thread as always.
    Crap! I removed the fans and disengaged the radbox but my lines to the rad wont reach the water.


    The only way is remove the tubes from the rad barbs and plug them with something. that means I need to plug 4 spots at the same time. I really dont feel like refilling and bleeding my whole loop tonight.
    and it would be better if I had a friend here to help my switch to the extension but I could do it myself.
    Ive use sharpie marker caps as plugs before but maybe I could kneed some Scotch seal string into a ball and use that instead.
    Do you think I'm going to even get any dramatic gains going to chiller?
    I normally wouldn't even mess around with this and go straight to dice container or ln2 but I only have 1 AM3 board and its in my main rig so this mission appealed to me
    but at the same time its almost easier for me to remove the board and trace a socket template and start cutting neoprene and screw the container on.
    I think that will definitely happen on friday after I make it through this h20 mission alive. Then I can post how well these scale with cold going from h20 ambient to chilled h20 to subzero xtreme.

Page 2 of 40 FirstFirst 1234512 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •