If you pace yourself just right, we will still be here after killing our gulftowns with too much voltage .
If you pace yourself just right, we will still be here after killing our gulftowns with too much voltage .
Cooling was changed from MUGEN∞2(SCMG-2000) to Megahalems. It and grease changed from AS-05 to Thermal Elixer.
206×21=4322MHz Vcore 1.2250V(BIOS)
4.92 spi 32m with open window ambients. Need ram capable of 2140 would get better time...my 1600 rated maxes ~2000 with cas 9.
Last edited by rge; 11-27-2009 at 05:52 AM.
211×21=4426MHz Vcore 1.26250V(BIOS)
^^^^ very good job. Amazing CPU. How much better are your temps now?
Yeah, I'd like to have these temps 24/7, but just 4,2GHz are that hot at load with 23°C ambient in my living room.
Thanks bro.
My kind of exotic cooling (Not mine, just picked up at google!!!):
Wintergarten Haus1.jpg
Putting the pc in there, open all windows and doors, hope for good temps outside - it had 11°C then - and let the machine run!
I have a good friend from america who didn't know my radiator, maybe you also don't know - so here it is:
I have 9 x 120's on it!
DSC_0520 (3).jpg
My aim was to run the computer as fast as it can do...due to the fact, that the pcie-clock is limited by Gigabyte at 103.5 MHz I can't go further. There's a Solder mod, but I don't have the heart to do that. Except this fact, the board is impressive and easy to handle to! I now know, that it is possible to run 4,6 GHz, but I don't need it!
Thanks a lot bro.....
I know people running 4,8 on Chiller and one who ran 5GHz primestable with LN2!!!
@emertX: You got a really nice cpu there, low voltage but also quite hot. If you you do the PCIe mod on your GB, I think you'll find that its easier to get 4.6+ stable with slightly less vcore at 104+ on the pci. Thats my experience atleast.
Yes, max bootable/stable bclk now is 232 (228 before mod). Think i need cold to get further.
@5GHZ Primestable is great, but LN2 won't work for 24/7 you know.
That 9x120 looks good. Sniper got the same batch# as you, and I remember he was talking about low-voltages but extra heat on this batch#.
I see 9x120 got the heat under control on that hot CPU, good job . With this kind of "exotic"-cooling, you should go for @4.7GHZ now, ... go go ..
Last edited by Sam_oslo; 11-23-2009 at 11:41 AM.
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
The mod is probably easy if your good at soldering, think hicoockie said he used 1 min to do it. For me it was not that easy, but got it in the end.
In normal room temp (22-24 degrees) with 2 360 rads with 1200/1400 rpm fans my W3520 can do ~3640 HT on and ~3750 without HT and still be under 80 degrees in RealTemp for Linx/Prime.
24/7 I'm running at 4515 1.328vcore 1.3vtt and fans turned down to ~700 rpm.
Do you Giga owners find your board undervolts much?
1.2 in bios gives me 1.152 in CPU-Z.
Visit The Boinc Bar Today
Boinc Boinc......The first 50 mil is the hardest!
POEM U.K number one.....woot
@emertX: The picture in the mod thread is better than what I can take.
@vaio: Yes, that is typicall for GB.
Thanks Sniper.
Yes, JC has advised me to lock down LLC.....will see if that settles her down.
Visit The Boinc Bar Today
Boinc Boinc......The first 50 mil is the hardest!
POEM U.K number one.....woot
Up to page 66 of this epic novel
Seemingly solid at.
200 x 19 HT on.....1.212v in bios (1.168 in Windows).
Makes for a decent lil cruncher.
Visit The Boinc Bar Today
Boinc Boinc......The first 50 mil is the hardest!
POEM U.K number one.....woot
pup, you got an i7? Where as I?
Needed a new workhorse to help me back into the top 40 at Poem
Currently alternating between Poem and WCG trek.
Visit The Boinc Bar Today
Boinc Boinc......The first 50 mil is the hardest!
POEM U.K number one.....woot
cool, what are the specs on that rig dude?
In sig
Running nice and conservative 3.8 at the moment.
200 x 19 HT on/Turbo off.
1.212v bios.....1.168 in Windows......temp max 70c under crunchy load-in a closed room with no window.
Acts up at anything over 3.8 so leaving her be for now.
Voltages need tweaking a little to go higher (if she can) but right now she seems rock solid so leaving her be.
My lean mean Poem machine
Visit The Boinc Bar Today
Boinc Boinc......The first 50 mil is the hardest!
POEM U.K number one.....woot
very nice pup, I didn't notice the specs were in the sig dude. Gotta love i7's for crunching bro, they are amazing.
Bookmarks