Yes; however, you haven't run it long enough to be considered a real test. You need to have at least 8 hours to be safe. Also, why are your GFlops so low? I get 50GFlops with my Q9450, which is clocked slightly below yours.
Yes; however, you haven't run it long enough to be considered a real test. You need to have at least 8 hours to be safe. Also, why are your GFlops so low? I get 50GFlops with my Q9450, which is clocked slightly below yours.
Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
—Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.
That's the old Prime95 rule. Refer to my experience in my first post in this thread. 10 hrs Prime95 stable = failed Linpack in 2 minutes.
Because you have a bit more memory than he does, and the GFLOPs are more accurate when using more memory to test.
.:: Gaming PC Specs ::.
Case: Antec Nine Hundred
CPU: Intel Core i7-2600K @ 4.6 GHz, 1.44v (cooled by Xigmatek GAIA) [IntelBurnTest{Linpack} stable]
GPU/Monitor: VisionTek HD 6950 @ 6970, 950 MHz/1375 MHz 1.30v + Sony BRAVIA 32EX400 1080p
Motherboard: GIGABYTE Z68XP-UD4 F5
Memory: 16 GB (4x 4 GB) Corsair Vengeance LP DDR3 1600
Hard Drive: 2x Seagate 500 GB 7200.11 RAID 0 & RAID 1 (Matrix RAID) + 1x WD Caviar Black 640 GB
Sound: Creative SB X-Fi Fatal1ty Profess1onal, Logitech X-530
PSU: Corsair AX-1200 (1500W PSU!)
O/S: Microsoft® Windows 7 Ultimate SP1 X64
Bookmarks