So you just clip the the wire between the pin and this grabber, and the other lead goes to the potmeter then?
Cool, gotta get me some of these
So you just clip the the wire between the pin and this grabber, and the other lead goes to the potmeter then?
Cool, gotta get me some of these
Abit AN7 - XP2500+ @ XP3200+ (oc'ing still has to begin hehe) - 2x512MB OCZ PC3200EL Platinum Edition - Sapphire Atlantis 9800Pro @ XT @ default speeds - NEC ND2510A DVD/RW - LG 16x/40x DVD/CD - 2x Hitachi 400GB SATA - 2x Maxtor 200GB SATA - 1x Maxtor 120GB SATA - 1x Maxtor 40GB PATA - 2x WD Raptor 74GB (raidO) SATA - 2x Promise SATA150 TX2 - 1x Promise Fasttrack SATA150 TX4
-------------------------------------
What's your storage?
Here are some pics from Doc:
clipped on pin
When done properly, soldering can be quite precise.
see pic: http://www.maximumoc.com/img/hardwar...volt_mod_1.jpg
Dinosaurs are chortling.
Lian Li PC1200B, Custom Water Cooling, Lamptron FC5 Fan Controller w/ 4x 120mmx38 Deltas
i7 930 @ 3.8ghz, Rampage III Extreme, 12GB G.Skill PC2000, BFG 260GTXOC, PNY Quadro 380FX
(1) HP LP2475w 24", (2) Dell 2007WFP 20", Corsair AX1200 1200w, 3Ware 9650SE Raid
(2) 500gb Hybrid Seagate Raid 1, (2) 2TB WD Red NAS 64mb Raid 1, (5) 1TB Hitachi 32mb Raid 5
precise.....yes removable......noOriginally posted by sysfailur
When done properly, soldering can be quite precise.
see pic: http://www.maximumoc.com/img/hardwar...volt_mod_1.jpg
I found you have to tape them in place cos if they move ur pc will crash,ive had to put one on leg 7 47K pot.and one on leg 10 a 47k pot set to 30k just to get a stable 2v,this KX7 hates V modds.
Graphics BFG 8800 GT
Motherboard Asus M2N4-SLI
AMD Athlon 64 x 2 Processor 4400+
OCZ DDR2 667MHz PC2 5400 2Gb
3 x 250 Gb Western Digital SATA300, 7200 rpm, 8MB Cache, 8.9 ms
2 x Dual Layer burner, NEC
PSU Tagan
O/S XP Pro with SP 3
Vista dual boot.
well i just got my SMD grabers but it dont work for me can someone help me i mean i tried the 7 pin and then it didnt work and then i put one of the smd on the 10 pin and it ddint do no diff. can some one explain to me please my email is nootrantk@yahoo.com please help me if u need pics just tell me ill take them and show you thx for ur help
--------------------------------------------------------------------------------------
CPU - Athlon 1600 XP + (1,4ghz) @ 1783 MhZ (AGOIA)
FSB 164x11.0 (Bus @ 328mhz) Vcore @ 1.89 I/0v @ Max DDRV @ 2.65M
MotherBoard - Abit KX7-333R
OS - Win XP PRO
Ram - 256 DDR Cas 2.5 PC2100 Kingston , 256 cas 2.5 PC2100 Generic
Graphic Card - Abit siluro G Force 4 440 270 Core @ 333Mhz Mem 400 mhz @ 500mhz no addition cooling
Sound - Sound Blaster Live 5.1
Tv Tunner - ATI Wonder Ve
CD-Roms - (2 IDE S) 16x10x40 (2 IDE M) 52x CD Rom soon Upgrading
Harddrives - (1 IDE M Maxtor D740X 40 GB 7200 RPM AtA 133) (On Raid 1 M)MaXtor Diamond
Max Plus 25.4 GB 5400 RPM AtA 66)(On Raid 1 S WesternDigital WDC 20 GB 5400RPM AtA100)
Modem - Gateway Fax Modem
Network Card - Winbond
Tower - Lian Li PC61 Black case (Modded by me with a windows in the side panel And has legs now it can WALk LOL)
Home Made Round Cables
PS - 450 Watt Allied AL-B450EATX
Cooler - ALPHA PAL8045U
Last Update 12/02/2002 By Nootrak4 9:10 Am Eastern stander time
---------------------------------------------------------------------------------------
Last edited by AMD_nootrak4; 12-02-2002 at 06:21 PM.
Welcome AMD_nootrak4Originally posted by AMD_nootrak4
well i just got my SMD grabers but it dont work for me can someone help me i mean i tried the 7 pin and then it didnt work and then i put one of the smd on the 10 pin and it ddint do no diff. can some one explain to me please my email is nootrantk@yahoo.com please help me if u need pics just tell me ill take them and show you thx for ur help
what kind of resistance did you use? trimmer or pots? Where did you ground?
Well i dont know i mean i just readed here about the SMD grabber and i thought that if i just put it on it would just creat the resistances so that mean i need other thing i mean can you explain in more details please. im reall like lost at the moment is my first time doing something like that sorry newbie
--------------------------------------------------------------------------------------
CPU - Athlon 1600 XP + (1,4ghz) @ 1783 MhZ (AGOIA)
FSB 164x11.0 (Bus @ 328mhz) Vcore @ 1.89 I/0v @ Max DDRV @ 2.65M
MotherBoard - Abit KX7-333R
OS - Win XP PRO
Ram - 256 DDR Cas 2.5 PC2100 Kingston , 256 cas 2.5 PC2100 Generic
Graphic Card - Abit siluro G Force 4 440 270 Core @ 333Mhz Mem 400 mhz @ 500mhz no addition cooling
Sound - Sound Blaster Live 5.1
Tv Tunner - ATI Wonder Ve
CD-Roms - (2 IDE S) 16x10x40 (2 IDE M) DVD/CDRW Combo 16x D 32X B 10x RW 40x R
Harddrives - (1 IDE M Maxtor D740X 40 GB 7200 RPM AtA 133) (On Raid 1 M)MaXtor Diamond
Max Plus 25.4 GB 5400 RPM AtA 66)(On Raid 1 S WesternDigital WDC 20 GB 5400RPM AtA100)
Modem - Gateway Fax Modem
Network Card - Winbond
Tower - Lian Li PC61 Black case (Modded by me with a windows in the side panel And has legs now it can WALk LOL)
Home Made Round Cables
PS - 450 Watt Allied AL-B450EATX
Cooler - ALPHA PAL8045U
Last Update 12/02/2002 By Nootrak4 9:10 Am Eastern stander time
---------------------------------------------------------------------------------------
This will explain all
http://www.xtremesystems.org/forums/...&threadid=1432
Am I missing something? $1.75 on the original page and $5.75 on that page? That's more expensive?Originally posted by JAWS
Doc over at O/C found the SMD Grabber cheaper! Part# 885-5245
http://www.alliedelec.com/cart/partlookup.asp
well elexp.com has a $20 minimum. which really isn't that bad.
well i didn check that out tha tis how i got to this page. so the SMD graber are just meant to replace the soldring. see i thought it was diff u know i just thought that when i put the SMD that it was just going to do it lol. well im new so dont laugh after i do this im going to try my Graphic card i know that is a GF440 but i just want to try HEHEHEHE
P.S> i know i got a good overclock bu tim really going for 2.0ghz that is why i want to do the mod and i dont really want to buy other MB.i have an a old epox 8K7A+ and i tried it and it can make it but i just need some more volt. i got it to 2.0 ghz with wait 12.5 X 160. stable in bios just high temp HEHEHE it was at 55c in bios i know that it wont boot to windows but i just want to do it on my computer
Hye the pic are not loading that one that mrice did for some reason i dont know like the pics in the end well i need ot go to sleep need to go to work tomorrow thx for the help hey any of you can take pics of ur systems with the MOD
--------------------------------------------------------------------------------------
CPU - Athlon 1600 XP + (1,4ghz) @ 1783 MhZ (AGOIA)
FSB 164x11.0 (Bus @ 328mhz) Vcore @ 1.89 I/0v @ Max DDRV @ 2.65M
MotherBoard - Abit KX7-333R
OS - Win XP PRO
Ram - 256 DDR Cas 2.5 PC2100 Kingston , 256 cas 2.5 PC2100 Generic
Graphic Card - Abit siluro G Force 4 440 270 Core @ 333Mhz Mem 400 mhz @ 500mhz no addition cooling
Sound - Sound Blaster Live 5.1
Tv Tunner - ATI Wonder Ve
CD-Roms - (2 IDE S) 16x10x40 (2 IDE M) DVD/CDRW Combo 16x D 32X B 10x RW 40x R
Harddrives - (1 IDE M Maxtor D740X 40 GB 7200 RPM AtA 133) (On Raid 1 M)MaXtor Diamond
Max Plus 25.4 GB 5400 RPM AtA 66)(On Raid 1 S WesternDigital WDC 20 GB 5400RPM AtA100)
Modem - Gateway Fax Modem
Network Card - Winbond
Tower - Lian Li PC61 Black case (Modded by me with a windows in the side panel And has legs now it can WALk LOL)
Home Made Round Cables
PS - 450 Watt Allied AL-B450EATX
Cooler - ALPHA PAL8045U
Last Update 12/02/2002 By Nootrak4 9:10 Am Eastern stander time
---------------------------------------------------------------------------------------
Hi@all
I want to do the VDD Mod for the 8RDA+ but I don't know which SMD grabbers to buy,do I need anything else and I don't know how they work.
Has anyone done the VDD Mod with grabbers?If so can you explain me how I can do that?
PS:I don't find them,how are they called in Germany?
hi,
look at conrad.de or reichelt.de
there are 1kohm potis
greetz
rainerausrs
xp2400@2,2 ghz, 2x256 megs xms3500 cl2@11x200sync, 8rda+
hi,
look right here
SMD PINZETTE
u also need a "SMD POTI" or "SMD TRIMMER" 1/4 watt 1kohm
greetz
rainerausrs
xp2400@2,2 ghz, 2x256 megs xms3500 cl2@11x200sync, 8rda+
Your Link doesn't work.
Are the SMD Grabbers large?I mean on the pics from Jaws the were really tiny,but the ones which I've seen @ conrad.de were real big and they don't look like the ones which Jaws had.
Last edited by C3; 01-03-2003 at 05:09 AM.
I've choosen a Potentiometer from conrad.de with this article number: 425079
Is this one okay?But I'm still looking for a SMD Pinzette.
Last edited by C3; 01-03-2003 at 05:43 AM.
I don't know if anyone mentioned it yet cuz I don't have time to read the whole thread. But I snagged some SMD Grabbers from www.mouser.com. Reasonable price & shipping rates & I got them in 2 days
They're real slick...alot safer than the micro clips I was using before
E8600. EP45-UD3P. 500FSB 24/7. Still WinXP. Heatware
does radio shack have them? are they all the same? can you still fit a longAGP card in the slot? it looks like its sorta in the way
ermm..ok, thx for nothing
i bought some Pomonas from outpost....I hope my 9700 will still fit, it looks like it runs right into the area
Holy cow....... I used mouser for a few items a long time ago..( we're talking over 10 years. b4 Gore created the internet....; ).... forgot they were even around ... heheheOriginally posted by N8
I don't know if anyone mentioned it yet cuz I don't have time to read the whole thread. But I snagged some SMD Grabbers from www.mouser.com. Reasonable price & shipping rates & I got them in 2 days
They're real slick...alot safer than the micro clips I was using before
Flashbacks are taking their toll... please step back from the car......
Zen2 Has brought AMD back!
Anyone from scandinavia that know where to get these, eventually what they are called?
Intel i7 3930K C2 @ 4700 mhz (100 x 47) 1.4v
EK Supremacy/EK XTC 420+280/EK DCP4.0/PrimoChill 1/2 ID 3/4 OD
Asus Rampage IV EXTREME
16 GB G.Skill RipjawsZ @ 2400 CL10-12-11-1T
Zotac GTX670
Antec Quattro 850W
Intel 330 180 GB + Micron C400 128 GB
LD Cooling PC-V7 B/R
Supa man, is this what you ordered from outpost?Originally posted by SupaMan
ermm..ok, thx for nothing
i bought some Pomonas from outpost....I hope my 9700 will still fit, it looks like it runs right into the area
http://shop3.outpost.com/product/2368809
if it is how do you like it? if not can you point me to the correct Pomona please. Thank you very much......
Nice avator. didn't i destroy you? heheheOriginally posted by JAWS
well elexp.com has a $20 minimum. which really isn't that bad.
Asrock Dual Sata2
Opteron146@2.93ghz(293x10 HTT)@1.50v
Artic Cooling Freezer64
2x1024 Gskill HZ @ 3,3,4,7,16 @ 243mhz
eVGA e-Geforce 7800GT CO SE @513/1300
OCZ Powerstream 520
Bookmarks