SUB TIMINGS FOR 2GB NQ & 2GB NS
2GB NR can use the Asus timings, but G.Skill SPD timings are recommendable for optimal results.
10-10-10-10 will not work in most cases. The settings above are Gskill SPD sub timings!
SUB TIMINGS FOR 2GB NQ & 2GB NS
2GB NR can use the Asus timings, but G.Skill SPD timings are recommendable for optimal results.
10-10-10-10 will not work in most cases. The settings above are Gskill SPD sub timings!
Last edited by G.S EUTech; 10-01-2006 at 10:07 AM.
I'm running at the 4:5 divider at FSB 390 (DDR2-975) at 4-4-4-12, and I tried the above subtimings, and my superpi 1M went from 14 sec to 18 sec. I'm back to 10-10-10-10, and my superpi is back to 14.4 sec.Originally Posted by remorema
Mark
Bench/Crunch Rig
i7-2600k
MSI P67A-GD65
ATI 6950x2
8 GB G.Skill Pi DDR3-1600
Xigmatech CPU cooler
Sparkle Gold 1250w PSU
Crunching Rig #2
Q-6600
Asus P5K-Deluxe WiFi
4 GB G.Skill DDR-2
ATI 4850
Tuniq Tower
24/7 rig
i-7 930
ASUS REII
ATI HD5850
Noctua CPU cooler
8 GB G. Skill Ripjaws DDR3-1600
Media Server Under Construction
E6750
Asus Maximus Formula
NVIDIA GT9500
4GB G.Skill Pi DDR2
Stock cooler
2xHitachi Deskstar 2TB HDD
Hi,
I cannot get my GBPK RAM to run at the advertised speed / latency (CAS4) in spite of copying your BIOS settings exactly. My specs :
P5B Deluxe (BIOS 614)
E6600
ATI1900XT
2 GB PC6400 CAS4 G.Skill GBPK RAM
The system is not overclocked, temps are OK (CPU idle 38, load 44). The RAM is auto detected at CAS5 and system runs stable and fine at the looser settings.
I have also re-loaded the BIOS defaults and made only the changes suggested to make sure nothing else is affecting the RAM.
Once I make the suggested adjustments in the BIOS as per this thread to CAS4 4-4-4-12 on booting the system shows the BIOS start-up screen and then continuously crash cycles until I hit the reset.
I increased volts to 1.9V as shown on your screenshots and on the packaging but no further.
Maybe I am missing something - do you have any suggestions?
Regards
Chunks
Last edited by Chunkers; 10-04-2006 at 11:11 AM.
hummmm, you using exactly same timing i post but no luck at all?Originally Posted by Chunkers
please let me know what is your SN
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
Hi all. Iīve got a problem with this board...
I got a brand new mobo, a conroe 6400, 2GB GSkill 6400 and a X1900 AIW. Connected all the devices (plus 4 SATA 80GB and a Audigy2 Platinum) and instaled a fresh Windows XP Pro + SP2.
The system turned on, I installed the motherboard drivers and used the ASUS UPDATE to update the BIOS. The BIOS the program selected was version 711. I downloaded it, the program flashed the BIOS and restarted.
When the system restarted, the blue Asus logo on the board became red, the cpu fan began to spin but that is all that happened. No bip, no video, nothing else...
I tryed to boot with the support CD to restart the original BIOS but again I get nothing because there is no action: no bip, no video. The mobo led, cpu fan, DVD drivers and HDs are working are working (lights are on), but there is no video... Monitor keeps saying NO SIGN.
Any ideas on what to do to get my system on again?
Thanks
I have flashed to the latest BIOS 711 and re-tried all your settings as shown in this thread and my RAM will still only run at CAS5, crashes on CAS4 settings.Originally Posted by G.S Technician
I have PM'ed and emailed you the serial numbers for my sticks
Thanks again
CHunks
In order to get this ram running at 500mhz with a 4:5 divider, you will need a nb volt of 1.65 and a sb volt of 1.7...also in order for it to be stable you will need to replace the nb cooler, stock cooler will not be enough......mine wasnt stable at 4-4-4-12 500mhz with a 4:5 divider intill i baught this......best 25 bucks ever spent :]
http://www.newegg.com/Product/Produc...82E16835116018
few days later i will have better sitting for this mobo and i will keep adding more and more mobo testing
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
Hi
I have bought G.Skill F2-6400Phu2-2GBNR 1024x2
i have the pc overclockd to 4 Ghz so im happy the mems holding out at 1:1 @ 1000 Mhz....
could you direct me to any better timings as im not to cluey on that sort of stuff and im sure when you look at the mem timings you would be able to tell me what to change..
atm im at 6.6.6.18. 6. 42 15. 31. 15. 31 i think thats the correct order default is
5.5.5.15 .6 42 10 10 10 10 Cheers
Asus P5B-Delux -Intel E6600-conroe @ 4 Ghz 445x9...500x8 :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-Cm stacker case -OCZ 550w Powerstream adjustable rails- Pe Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
Last edited by HoriWanderFuLL; 11-29-2006 at 12:48 AM.
suggest 5-5-5-15-4-42-3-11-7-13 with 2.1~2.2v on DDR2 1000 but no guarantee
GST
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
Thanks alot....Yes it works fine.
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
Ok, but the OP says its 10-10-10-10 (http://www.gskillusa.com/motherboard...gbhz_002.jpg)- which one should be used?Originally Posted by remorema
FAH Stats | LastFM | dA | OS :: ARCH64 | WM/DE :: XFCE & Awesome
Desky :: E6400@8x400:3.2ghz(L626A, ~1.26V) / Tuniq Tower 120 | G.Skill HZ 2GB DDRII@800mhz(1:1/4-4-4-4, 2.05V) | ASUS P5B DLX | SG 320GB SATAII + WD500GB Ext. | Gainward 8800GTS 640MB | X-Fi XtrMusic
Dell XPS M1330 :: T9300 2.5Ghz | 4GB DDRII667 | 320GB HDD | 8400GS | Black/WLED | 6-Cell
I am having problems with f2-6400phu2-2gbnr kits on a p5b dlx system bios 804
i have used the settings from the first post 5-5-5-15-4-42-10-10-10-10 1.8v upto 1.95v at stock ddr2 800 speeds. so far i have tested 3 kits using quick tech pro extended memory test and get errors on all 3 kits in different places
I also tested a f2-6400phu1-1gbnr kit and that worked 100%.
the serial numbers of one of the kits 6480901439309 and 310
please use 3-11-7-13 for all subtiming.
i will post new screen for setting soon
we are planing to move so phone, testing platform are all down.
GST
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
change the subtiming and let me know the result pleaseOriginally Posted by leejsmith
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
sorry is that a reply to my previous post on gskill HZ 6400 subtimings?Originally Posted by G.S Technician
FAH Stats | LastFM | dA | OS :: ARCH64 | WM/DE :: XFCE & Awesome
Desky :: E6400@8x400:3.2ghz(L626A, ~1.26V) / Tuniq Tower 120 | G.Skill HZ 2GB DDRII@800mhz(1:1/4-4-4-4, 2.05V) | ASUS P5B DLX | SG 320GB SATAII + WD500GB Ext. | Gainward 8800GTS 640MB | X-Fi XtrMusic
Dell XPS M1330 :: T9300 2.5Ghz | 4GB DDRII667 | 320GB HDD | 8400GS | Black/WLED | 6-Cell
^ ah right, are those subtimings for the f2-6400phu2-2gbnr kits only or 2GB HZ as well?
FAH Stats | LastFM | dA | OS :: ARCH64 | WM/DE :: XFCE & Awesome
Desky :: E6400@8x400:3.2ghz(L626A, ~1.26V) / Tuniq Tower 120 | G.Skill HZ 2GB DDRII@800mhz(1:1/4-4-4-4, 2.05V) | ASUS P5B DLX | SG 320GB SATAII + WD500GB Ext. | Gainward 8800GTS 640MB | X-Fi XtrMusic
Dell XPS M1330 :: T9300 2.5Ghz | 4GB DDRII667 | 320GB HDD | 8400GS | Black/WLED | 6-Cell
3-11-7-13 is good for all DDR2 800Originally Posted by Stx
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
May I ask how you found out that the subtimings are 3-11-7-13??
The other tech guys say: 3-10-5-13, and 3-11-5-14.....
Because I really want to run as 'tweaked' as possible.
SO this should run: (divider 4:5)
4-4-4-12-4-42-3-11-7-13
Last edited by Kakulukia; 12-22-2006 at 02:51 PM.
My PC:
- Intel Core 2 Duo E8400 (9x 333),
waiting at cpu waterblock for OC
-2GBHZ G.Skill Dualchannel@ 333@ 1.9V
-Asus P5B Deluxe, no mods
-2x raptor 74gb (8mb) RAID0
-8800GTS @ stock
-Creative Soundblaster Audigy SE
-Zalman 460W-APS
Anyone know how I can get my 6400HZ to boot on this board in dual channel? Currently only working in single channel mode and only in the B1/B2 slots. I get no post at all with dual channel.
Core i7 930 @ 3.8 1.24v
Asus P6X58D Premium
6 gb G.Skill Pi 1600
Diamond 4870
Corsair 750HX
Intel X25-V SSD
2 x WD 640gb black
Lian li PC-70
Asus MS238H LED Monitor
H2O: Thermochill 120.3, MCP 655 pump, EK Supreme HF (nickel/acetal), San Ace fans
Good question, im wondering the same thing.Originally Posted by Kakulukia
Nothing anymore
we looked into the motherboard timing and believe that is 100% 24/7 stable. we don't give tweaked timing since not all the user understand and might run into problemOriginally Posted by Kakulukia
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
if not working in dual channel, eitehr your board has problem or something wrong with ram. set to FSB266 and DDR2 533 and see dual channel works or notOriginally Posted by fasttruck860
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
should I be trying to get the lowest possible vdimm that my settings will run at and are stable? im testing e6400@2.67, 2:3 divider- @1004mhz (bios vdimm@2.3-dunno real, timings: 5-5-5-12-4-42-3-11-7-13), i got errors in MemTest/orthos with 4-4-4-12(even at bios vdimm 2.35).
The 5-5-5-12-4-42-3-11-7-13 is stable so far in memtest, afterwards should I try looser timings, like 5-5-5-10 or similar?
edit: im doing 4:5@835, 4-4-3-8-4-42-3-11-7-13 now- testing
Last edited by Stx; 12-28-2006 at 12:48 AM.
FAH Stats | LastFM | dA | OS :: ARCH64 | WM/DE :: XFCE & Awesome
Desky :: E6400@8x400:3.2ghz(L626A, ~1.26V) / Tuniq Tower 120 | G.Skill HZ 2GB DDRII@800mhz(1:1/4-4-4-4, 2.05V) | ASUS P5B DLX | SG 320GB SATAII + WD500GB Ext. | Gainward 8800GTS 640MB | X-Fi XtrMusic
Dell XPS M1330 :: T9300 2.5Ghz | 4GB DDRII667 | 320GB HDD | 8400GS | Black/WLED | 6-Cell
Bookmarks