hehe, I 've never seen anyone being better even on LN2... and my mach2 gt is stock
yeah superpi is hard... but pifast is even harder... and that's where the a64 kicks a$$ :thumbsup:
hehe, I 've never seen anyone being better even on LN2... and my mach2 gt is stock
yeah superpi is hard... but pifast is even harder... and that's where the a64 kicks a$$ :thumbsup:
Originally posted by SAE
Hmm... anyone else with 30s on an Athlon XP??? Mach2 GT is stock.![]()
![]()
![]()
Last edited by computersmsa; 09-05-2004 at 05:06 AM.
AMD Athlon A64 3400+ @346x9 2v = 3.108Mhz
Dual Cascade cooling power by Ricky -100ºC / -92ºC load
![]()
woah so that's what a 3400+ Newcastle needs for sub 30s scores![]()
---
wow nice pedro rochais it a clawhammer or a newcastle?
"M-I-A"
My modeste score... 39s
http://overclock.home.sapo.pt/OC/39s.JPG
Desktop: A64 Opteron 148@2650Mhz AC | DFI LANParty UT RDX200 | 2x1Gb TeamElite @ 240Mhz FSB | XFX 8600GT DDR3
| 2xHitachi 160Gb SATA(RAID0) + 1xSamsung 320Gb SATA | TDK 1616N | Samsung 70S+Samtron 55E | Genius Slim KB19 + Creative 5000 | Chieftec 360W |
------------ SwimmerStyle ------------
Notebook: Acer Aspire 1691WLMi | P-M 1.6Ghz Sonoma @ 1804MHz & 600MHz BUS | 1280Mb 333MHZ @ 190Mhz FSB
| ATi x600 64Mb | Toshiba 80Gb 5400RPM | Samsung SN-S082H | 15.4" WXGA Acer CrystalBrite | Microsoft Optical 4000 |
Cooled with LN2
![]()
P4 560 @ 4722MHz (18x262) / 1.4V
Asus P5P800 (VDDR & VAGP modded)
2x HyperX 3200 256MB 2-2-2-5 / 3.42V
nVentiv Mach2 R404
@2241MHz (1,7V) = 40s
Last edited by c0V3Ro; 09-14-2004 at 06:07 AM.
Inspiron6000 @ 2.4Ghz
Here's my best,so far.
![]()
Asus P5K<*>OCZ 450w<*>E6600@4.0ghz@9x445@1.450v<*>TeamXtreem DDR2-800 cl3 2x1gb<*>Sapphire 3870 512mb DDR4
Asus P5E X48 DeLuxe<*>OCZ 700w<*>E8600 E0@4.6ghz@1.350v wc<*>Corsair Titanium DDR2-800 4x2gb<*>Sapphire 2x3870 2x512mb DDR4 CF
This is my Pi![]()
P4 3.0C |Asus P4C800-E dlx |1GB Mushkin 3500 Level II I Antec TruePower 550
WD Raptor 74G +160GB Seagate | ATi radeon 9800pro Club 3D@440/820
Watercooled Pc. Cpu/Vga block by 11 | Eheim 1048 |LG Flatron 1730s
3D Mark 2k1SE = 20949Marks
Conroe E4300 + Asus P5PE-VM + Geil 2GB 6-3-3-2.5 DDR 400 + Seagate 160GB HDD + ATi X1950 PRO + Creative Audigy 2 ZS + SCORPIO LC6480S 480W Free-Plug
www.madtech.com.pt
Only Singlechannel and low FSB, but i like the Proz. :banana4:
@zeon
U should get a better Result, if u really benched with 10,5x245
Dualchannel 2-2-2-11! Think around 37 sec.
SuperPi likes FSB and Timings.
Last edited by funkflix; 09-16-2004 at 12:17 AM.
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
yep... got a bit better ^_^ Defrag and a litle fsb extra![]()
Conroe E4300 + Asus P5PE-VM + Geil 2GB 6-3-3-2.5 DDR 400 + Seagate 160GB HDD + ATi X1950 PRO + Creative Audigy 2 ZS + SCORPIO LC6480S 480W Free-Plug
www.madtech.com.pt
Strike !!![]()
Congrats.
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
A64 3000+@2600MHZ 1,6V
MSI K8N Neo Plat.
2*256MB OCZ PC3500EB@260 CL3-2-3-5@2,85V
Radeon 9800Pro
CPU+GPU watercooled
![]()
Still not happy with the mem but that's work in progress.
Too bad I forgot to run superpi 1M with the same clocks (5212Mhz or more)![]()
wow, do you use 4:5 bios?
P4C 3.2Ghz @ 4.2Ghz 1.8v (Vapo LS + 4 Tornados & 2xNexus)
AIW X800XT Running Stock
IC7-G w/ 2x 512MB KHX3000 (BH-5) + 2x 512MB Muskin Redline XP4000 BIOS 2.8
2x 36GB WD Raptors RAID 0 (ICH5R)
2x 80 gig Seagate SATA RAID 0 (SiI3112a)
Promedia 5.1 Ultra on Audigy 2 Plat
Pioneer DVR-108D / Lite-on combo SOHC-5232K
Lian-Li PC-65 w/ all 80mm tornado case fans & PC P&C 510w Deluxe
WinXP Pro
3d03: 14185
I don't know what you mean by 4:5 bios?
I use 1:1 memdivider, so that CPU is 250Mhz and mem is 250Mhz.
If you mean 533Strap, I was not able to use it after about 4,8GHz.
I had to change to 800strap to make it all the way to 5,2Ghz, which is bad because 533strap is so much faster.
If anyone can tell me why I was not able to use 533strap, please tell me![]()
Hilppa you're a crazy dude M8.....!....Here's one to you....![]()
![]()
INTEL PWA FOR EVER
Dr. Who my arss...![]()
.........
Cheers !!![]()
Getting back to it tonight... I got two chips of "5Ghz 2.8A" and a 550 that runs 4,1Ghz on stock air... and some liquid nitrogen and dryice![]()
Well Hilppa nice, but I think I need an upgrade in 8M M8Originally Posted by hipro5
![]()
Yes thats on a F53, and still the old 940 and the ECC ram:
the ramvolt is close to 4 volt on the SK8V
The ranking list is here:
http://www.biwa.ne.jp/~yok/838RANK-NEW.htm
Last edited by Tom Holck; 09-19-2004 at 02:13 AM.
Best OC Regards
Tom Holck
Denmark
The Homeland of nVentiv and Asetek
very nice score Tom Holck![]()
![]()
learn A.K.A JP
Good job Hilppa ....thats Extreme, and the 2.8A who runs at 4.1 it's unbelievable![]()
P4 3.0C |Asus P4C800-E dlx |1GB Mushkin 3500 Level II I Antec TruePower 550
WD Raptor 74G +160GB Seagate | ATi radeon 9800pro Club 3D@440/820
Watercooled Pc. Cpu/Vga block by 11 | Eheim 1048 |LG Flatron 1730s
3D Mark 2k1SE = 20949Marks
Bookmarks